u-boot/arch/powerpc/include/asm/global_data.h
Yangbo Lu ac76dd0836 Add global variable sdhc_per_clk for arm/powerpc
The QorIQ eSDHC controller supports two reference clocks. They are
platform clock and periperhal clock. The global variable sdhc_clk
has already been used for platform clock.
This patch is to add another global variable sdhc_per_clk for
periperhal clock, which provides higher frequency and is required
to be used for SD UHS and eMMC HS200/HS400 speed modes.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-01-16 13:16:26 +08:00

121 lines
3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
#include "config.h"
#include "asm/types.h"
/* Architecture-specific global data */
struct arch_global_data {
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
u32 sdhc_per_clk;
#if defined(CONFIG_FSL_ESDHC_ADAPTER_IDENT)
u8 sdhc_adapter;
#endif
#endif
#if defined(CONFIG_MPC8xx)
unsigned long brg_clk;
#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;
unsigned long cpm_clk;
unsigned long scc_clk;
unsigned long brg_clk;
#endif
/* TODO: sjg@chromium.org: Should these be unslgned long? */
#if defined(CONFIG_MPC83xx)
#ifdef CONFIG_CLK_MPC83XX
u32 core_clk;
#else
/* There are other clocks in the MPC83XX */
u32 csb_clk;
# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
# elif defined(CONFIG_ARCH_MPC8309)
u32 usbdr_clk;
# endif
# if defined(CONFIG_ARCH_MPC834X)
u32 usbmph_clk;
# endif /* CONFIG_ARCH_MPC834X */
# if defined(CONFIG_ARCH_MPC8315)
u32 tdm_clk;
# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
defined(CONFIG_ARCH_MPC837X)
u32 pciexp1_clk;
u32 pciexp2_clk;
# endif
# if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
u32 sata_clk;
# endif
# if defined(CONFIG_ARCH_MPC8360)
u32 mem_sec_clk;
# endif /* CONFIG_ARCH_MPC8360 */
#endif
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 lbc_clk;
void *cpu;
#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
#endif
#if defined(CONFIG_QE)
u32 qe_clk;
u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
#if defined(CONFIG_FSL_LAW)
u32 used_laws;
#endif
#if defined(CONFIG_E500)
u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
#endif
unsigned long reset_status; /* reset status register at boot */
#if defined(CONFIG_MPC83xx)
unsigned long arbiter_event_attributes;
unsigned long arbiter_event_address;
#endif
#if defined(CONFIG_CPM2)
unsigned int dp_alloc_base;
unsigned int dp_alloc_top;
#endif
#ifdef CONFIG_SYS_FPGA_COUNT
unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
#endif
#if defined(CONFIG_WD_MAX_RATE)
unsigned long long wdt_last; /* trace watch-dog triggering rate */
#endif
#if defined(CONFIG_LWMON5)
unsigned long kbd_status;
#endif
};
#include <asm-generic/global_data.h>
#if 1
#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2")
#else /* We could use plain global data, but the resulting code is bigger */
#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
gd_t *gd
#endif
#endif /* __ASM_GBL_DATA_H */