u-boot/doc/board/purism/librem5.rst
Angus Ainslie 466a9ea2a1 board: purism: add the Purism Librem5 phone
Initial commit of Librem5 u-boot and SPL

Signed-off-by: Angus Ainslie <angus@akkea.ca>
Co-developed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:10 +02:00

60 lines
1.4 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0+
Librem5
==========
U-Boot for the Purism Librem5 phone
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get ddr and hdmi firmware
- Build U-Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: srctree is U-Boot source directory
Get ATF from: https://source.puri.sm/Librem5/arm-trusted-firmware
branch: librem5
.. code-block:: bash
$ make PLAT=imx8mq CROSS_COMPILE=aarch64-linux-gnu- bl31
$ cp build/imx8mq/release/bl31.bin $(builddir)
Get the ddr and display port firmware
-------------------------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.15.bin
$ chmod +x firmware-imx-8.15.bin
$ ./firmware-imx-8.15.bin
$ cp firmware-imx-8.15/firmware/hdmi/cadence/signed_dp_imx8m.bin $(builddir)
$ cp firmware-imx-8.15/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make librem5_defconfig
$ make ARCH=arm
Burn the flash.bin
------------------
Use uuu to burn flash.bin. Power on the phone while holding vol+ to get it
into uuu mode.
.. code-block:: bash
$ git clone https://source.puri.sm/Librem5/librem5-devkit-tools.git
$ cd librem5-devkit-tools
$ cp $(builddir)/flash.bin files/u-boot-librem5.imx
$ uuu uuu_scripts/u-boot_flash_librem5.lst
Reboot the phone.