mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
0fd3d91152
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
584 lines
14 KiB
C
584 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* eSPI controller driver.
|
|
*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2020 NXP
|
|
* Author: Mingkai Hu (Mingkai.hu@freescale.com)
|
|
* Chuanhua Han (chuanhua.han@nxp.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <dm/platform_data/fsl_espi.h>
|
|
|
|
struct fsl_spi_slave {
|
|
struct spi_slave slave;
|
|
ccsr_espi_t *espi;
|
|
u32 speed_hz;
|
|
unsigned int cs;
|
|
unsigned int div16;
|
|
unsigned int pm;
|
|
int tx_timeout;
|
|
unsigned int mode;
|
|
size_t cmd_len;
|
|
u8 cmd_buf[16];
|
|
size_t data_len;
|
|
unsigned int max_transfer_length;
|
|
};
|
|
|
|
#define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave)
|
|
#define US_PER_SECOND 1000000UL
|
|
|
|
/* default SCK frequency, unit: HZ */
|
|
#define FSL_ESPI_DEFAULT_SCK_FREQ 10000000
|
|
|
|
#define ESPI_MAX_CS_NUM 4
|
|
#define ESPI_FIFO_WIDTH_BIT 32
|
|
|
|
#define ESPI_EV_RNE BIT(9)
|
|
#define ESPI_EV_TNF BIT(8)
|
|
#define ESPI_EV_DON BIT(14)
|
|
#define ESPI_EV_TXE BIT(15)
|
|
#define ESPI_EV_RFCNT_SHIFT 24
|
|
#define ESPI_EV_RFCNT_MASK (0x3f << ESPI_EV_RFCNT_SHIFT)
|
|
|
|
#define ESPI_MODE_EN BIT(31) /* Enable interface */
|
|
#define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */
|
|
#define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */
|
|
|
|
#define ESPI_COM_CS(x) ((x) << 30)
|
|
#define ESPI_COM_TRANLEN(x) ((x) << 0)
|
|
|
|
#define ESPI_CSMODE_CI_INACTIVEHIGH BIT(31)
|
|
#define ESPI_CSMODE_CP_BEGIN_EDGCLK BIT(30)
|
|
#define ESPI_CSMODE_REV_MSB_FIRST BIT(29)
|
|
#define ESPI_CSMODE_DIV16 BIT(28)
|
|
#define ESPI_CSMODE_PM(x) ((x) << 24)
|
|
#define ESPI_CSMODE_POL_ASSERTED_LOW BIT(20)
|
|
#define ESPI_CSMODE_LEN(x) ((x) << 16)
|
|
#define ESPI_CSMODE_CSBEF(x) ((x) << 12)
|
|
#define ESPI_CSMODE_CSAFT(x) ((x) << 8)
|
|
#define ESPI_CSMODE_CSCG(x) ((x) << 3)
|
|
|
|
#define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \
|
|
ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \
|
|
ESPI_CSMODE_CSCG(1))
|
|
|
|
#define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0
|
|
|
|
void fsl_spi_cs_activate(struct spi_slave *slave, uint cs)
|
|
{
|
|
struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
unsigned int com = 0;
|
|
size_t data_len = fsl->data_len;
|
|
|
|
com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF));
|
|
com |= ESPI_COM_CS(cs);
|
|
com |= ESPI_COM_TRANLEN(data_len - 1);
|
|
out_be32(&espi->com, com);
|
|
}
|
|
|
|
void fsl_spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
|
|
/* clear the RXCNT and TXCNT */
|
|
out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN));
|
|
out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN);
|
|
}
|
|
|
|
static void fsl_espi_tx(struct fsl_spi_slave *fsl, const void *dout)
|
|
{
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
unsigned int tmpdout, event;
|
|
int tmp_tx_timeout;
|
|
|
|
if (dout)
|
|
tmpdout = *(u32 *)dout;
|
|
else
|
|
tmpdout = 0;
|
|
|
|
out_be32(&espi->tx, tmpdout);
|
|
out_be32(&espi->event, ESPI_EV_TNF);
|
|
debug("***spi_xfer:...%08x written\n", tmpdout);
|
|
|
|
tmp_tx_timeout = fsl->tx_timeout;
|
|
/* Wait for eSPI transmit to go out */
|
|
while (tmp_tx_timeout--) {
|
|
event = in_be32(&espi->event);
|
|
if (event & ESPI_EV_DON || event & ESPI_EV_TXE) {
|
|
out_be32(&espi->event, ESPI_EV_TXE);
|
|
break;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
if (tmp_tx_timeout < 0)
|
|
debug("***spi_xfer:...Tx timeout! event = %08x\n", event);
|
|
}
|
|
|
|
static int fsl_espi_rx(struct fsl_spi_slave *fsl, void *din,
|
|
unsigned int bytes)
|
|
{
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
unsigned int tmpdin, rx_times;
|
|
unsigned char *buf, *p_cursor;
|
|
|
|
if (bytes <= 0)
|
|
return 0;
|
|
|
|
rx_times = DIV_ROUND_UP(bytes, 4);
|
|
buf = (unsigned char *)malloc(4 * rx_times);
|
|
if (!buf) {
|
|
debug("SF: Failed to malloc memory.\n");
|
|
return -1;
|
|
}
|
|
p_cursor = buf;
|
|
while (rx_times--) {
|
|
tmpdin = in_be32(&espi->rx);
|
|
debug("***spi_xfer:...%08x readed\n", tmpdin);
|
|
*(u32 *)p_cursor = tmpdin;
|
|
p_cursor += 4;
|
|
}
|
|
|
|
if (din)
|
|
memcpy(din, buf, bytes);
|
|
|
|
free(buf);
|
|
out_be32(&espi->event, ESPI_EV_RNE);
|
|
|
|
return bytes;
|
|
}
|
|
|
|
void espi_release_bus(struct fsl_spi_slave *fsl)
|
|
{
|
|
/* Disable the SPI hardware */
|
|
out_be32(&fsl->espi->mode,
|
|
in_be32(&fsl->espi->mode) & (~ESPI_MODE_EN));
|
|
}
|
|
|
|
int espi_xfer(struct fsl_spi_slave *fsl, uint cs, unsigned int bitlen,
|
|
const void *data_out, void *data_in, unsigned long flags)
|
|
{
|
|
struct spi_slave *slave = &fsl->slave;
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
unsigned int event, rx_bytes;
|
|
const void *dout = NULL;
|
|
void *din = NULL;
|
|
int len = 0;
|
|
int num_blks, num_chunks, max_tran_len, tran_len;
|
|
int num_bytes;
|
|
unsigned char *buffer = NULL;
|
|
size_t buf_len;
|
|
u8 *cmd_buf = fsl->cmd_buf;
|
|
size_t cmd_len = fsl->cmd_len;
|
|
size_t data_len = bitlen / 8;
|
|
size_t rx_offset = 0;
|
|
int rf_cnt;
|
|
|
|
max_tran_len = fsl->max_transfer_length;
|
|
switch (flags) {
|
|
case SPI_XFER_BEGIN:
|
|
cmd_len = data_len;
|
|
fsl->cmd_len = cmd_len;
|
|
memcpy(cmd_buf, data_out, cmd_len);
|
|
return 0;
|
|
case 0:
|
|
case SPI_XFER_END:
|
|
if (bitlen == 0) {
|
|
fsl_spi_cs_deactivate(slave);
|
|
return 0;
|
|
}
|
|
buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len);
|
|
len = cmd_len + data_len;
|
|
rx_offset = cmd_len;
|
|
buffer = (unsigned char *)malloc(buf_len);
|
|
if (!buffer) {
|
|
debug("SF: Failed to malloc memory.\n");
|
|
return 1;
|
|
}
|
|
memcpy(buffer, cmd_buf, cmd_len);
|
|
if (data_in == NULL)
|
|
memcpy(buffer + cmd_len, data_out, data_len);
|
|
break;
|
|
case SPI_XFER_BEGIN | SPI_XFER_END:
|
|
len = data_len;
|
|
buffer = (unsigned char *)malloc(len * 2);
|
|
if (!buffer) {
|
|
debug("SF: Failed to malloc memory.\n");
|
|
return 1;
|
|
}
|
|
memcpy(buffer, data_out, len);
|
|
rx_offset = len;
|
|
cmd_len = 0;
|
|
break;
|
|
}
|
|
|
|
debug("spi_xfer: data_out %08X(%p) data_in %08X(%p) len %u\n",
|
|
*(uint *)data_out, data_out, *(uint *)data_in, data_in, len);
|
|
|
|
num_chunks = DIV_ROUND_UP(data_len, max_tran_len);
|
|
while (num_chunks--) {
|
|
if (data_in)
|
|
din = buffer + rx_offset;
|
|
dout = buffer;
|
|
tran_len = min(data_len, (size_t)max_tran_len);
|
|
num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
|
|
num_bytes = (tran_len + cmd_len) % 4;
|
|
fsl->data_len = tran_len + cmd_len;
|
|
fsl_spi_cs_activate(slave, cs);
|
|
|
|
/* Clear all eSPI events */
|
|
out_be32(&espi->event , 0xffffffff);
|
|
/* handle data in 32-bit chunks */
|
|
while (num_blks) {
|
|
event = in_be32(&espi->event);
|
|
if (event & ESPI_EV_TNF) {
|
|
fsl_espi_tx(fsl, dout);
|
|
/* Set up the next iteration */
|
|
if (len > 4) {
|
|
len -= 4;
|
|
dout += 4;
|
|
}
|
|
}
|
|
|
|
event = in_be32(&espi->event);
|
|
if (event & ESPI_EV_RNE) {
|
|
rf_cnt = ((event & ESPI_EV_RFCNT_MASK)
|
|
>> ESPI_EV_RFCNT_SHIFT);
|
|
if (rf_cnt >= 4)
|
|
rx_bytes = 4;
|
|
else if (num_blks == 1 && rf_cnt == num_bytes)
|
|
rx_bytes = num_bytes;
|
|
else
|
|
continue;
|
|
if (fsl_espi_rx(fsl, din, rx_bytes)
|
|
== rx_bytes) {
|
|
num_blks--;
|
|
if (din)
|
|
din = (unsigned char *)din
|
|
+ rx_bytes;
|
|
}
|
|
}
|
|
}
|
|
if (data_in) {
|
|
memcpy(data_in, buffer + 2 * cmd_len, tran_len);
|
|
if (*buffer == 0x0b) {
|
|
data_in += tran_len;
|
|
data_len -= tran_len;
|
|
*(int *)buffer += tran_len;
|
|
}
|
|
}
|
|
fsl_spi_cs_deactivate(slave);
|
|
}
|
|
|
|
free(buffer);
|
|
return 0;
|
|
}
|
|
|
|
void espi_claim_bus(struct fsl_spi_slave *fsl, unsigned int cs)
|
|
{
|
|
ccsr_espi_t *espi = fsl->espi;
|
|
unsigned char pm = fsl->pm;
|
|
unsigned int mode = fsl->mode;
|
|
unsigned int div16 = fsl->div16;
|
|
int i;
|
|
|
|
/* Enable eSPI interface */
|
|
out_be32(&espi->mode, ESPI_MODE_RXTHR(3)
|
|
| ESPI_MODE_TXTHR(4) | ESPI_MODE_EN);
|
|
|
|
out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */
|
|
out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */
|
|
|
|
/* Init CS mode interface */
|
|
for (i = 0; i < ESPI_MAX_CS_NUM; i++)
|
|
out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL);
|
|
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) &
|
|
~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16
|
|
| ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK
|
|
| ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF)));
|
|
|
|
/* Set eSPI BRG clock source */
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
|
|
| ESPI_CSMODE_PM(pm) | div16);
|
|
|
|
/* Set eSPI mode */
|
|
if (mode & SPI_CPHA)
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
|
|
| ESPI_CSMODE_CP_BEGIN_EDGCLK);
|
|
if (mode & SPI_CPOL)
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
|
|
| ESPI_CSMODE_CI_INACTIVEHIGH);
|
|
|
|
/* Character bit order: msb first */
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
|
|
| ESPI_CSMODE_REV_MSB_FIRST);
|
|
|
|
/* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */
|
|
out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
|
|
| ESPI_CSMODE_LEN(7));
|
|
}
|
|
|
|
void espi_setup_slave(struct fsl_spi_slave *fsl)
|
|
{
|
|
unsigned int max_hz;
|
|
sys_info_t sysinfo;
|
|
unsigned long spibrg = 0;
|
|
unsigned long spi_freq = 0;
|
|
unsigned char pm = 0;
|
|
|
|
max_hz = fsl->speed_hz;
|
|
|
|
get_sys_info(&sysinfo);
|
|
spibrg = sysinfo.freq_systembus / 2;
|
|
fsl->div16 = 0;
|
|
if ((spibrg / max_hz) > 32) {
|
|
fsl->div16 = ESPI_CSMODE_DIV16;
|
|
pm = spibrg / (max_hz * 16 * 2);
|
|
if (pm > 16) {
|
|
pm = 16;
|
|
debug("max_hz is too low: %d Hz, %ld Hz is used.\n",
|
|
max_hz, spibrg / (32 * 16));
|
|
}
|
|
} else {
|
|
pm = spibrg / (max_hz * 2);
|
|
}
|
|
if (pm)
|
|
pm--;
|
|
fsl->pm = pm;
|
|
|
|
if (fsl->div16)
|
|
spi_freq = spibrg / ((pm + 1) * 2 * 16);
|
|
else
|
|
spi_freq = spibrg / ((pm + 1) * 2);
|
|
|
|
/* set tx_timeout to 10 times of one espi FIFO entry go out */
|
|
fsl->tx_timeout = DIV_ROUND_UP((US_PER_SECOND * ESPI_FIFO_WIDTH_BIT
|
|
* 10), spi_freq);/* Set eSPI BRG clock source */
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_SPI)
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return bus == 0 && cs < ESPI_MAX_CS_NUM;
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct fsl_spi_slave *fsl;
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
fsl = spi_alloc_slave(struct fsl_spi_slave, bus, cs);
|
|
if (!fsl)
|
|
return NULL;
|
|
|
|
fsl->espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
|
|
fsl->mode = mode;
|
|
fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
|
|
fsl->speed_hz = max_hz;
|
|
|
|
espi_setup_slave(fsl);
|
|
|
|
return &fsl->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
|
|
|
|
free(fsl);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
|
|
|
|
espi_claim_bus(fsl, slave->cs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave);
|
|
|
|
espi_release_bus(fsl);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct fsl_spi_slave *fsl = (struct fsl_spi_slave *)slave;
|
|
|
|
return espi_xfer(fsl, slave->cs, bitlen, dout, din, flags);
|
|
}
|
|
#else
|
|
static void __espi_set_speed(struct fsl_spi_slave *fsl)
|
|
{
|
|
espi_setup_slave(fsl);
|
|
|
|
/* Set eSPI BRG clock source */
|
|
out_be32(&fsl->espi->csmode[fsl->cs],
|
|
in_be32(&fsl->espi->csmode[fsl->cs])
|
|
| ESPI_CSMODE_PM(fsl->pm) | fsl->div16);
|
|
}
|
|
|
|
static void __espi_set_mode(struct fsl_spi_slave *fsl)
|
|
{
|
|
/* Set eSPI mode */
|
|
if (fsl->mode & SPI_CPHA)
|
|
out_be32(&fsl->espi->csmode[fsl->cs],
|
|
in_be32(&fsl->espi->csmode[fsl->cs])
|
|
| ESPI_CSMODE_CP_BEGIN_EDGCLK);
|
|
if (fsl->mode & SPI_CPOL)
|
|
out_be32(&fsl->espi->csmode[fsl->cs],
|
|
in_be32(&fsl->espi->csmode[fsl->cs])
|
|
| ESPI_CSMODE_CI_INACTIVEHIGH);
|
|
}
|
|
|
|
static int fsl_espi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
espi_claim_bus(fsl, fsl->cs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_release_bus(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
espi_release_bus(fsl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
return espi_xfer(fsl, fsl->cs, bitlen, dout, din, flags);
|
|
}
|
|
|
|
static int fsl_espi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
debug("%s speed %u\n", __func__, speed);
|
|
fsl->speed_hz = speed;
|
|
|
|
__espi_set_speed(fsl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
debug("%s mode %u\n", __func__, mode);
|
|
fsl->mode = mode;
|
|
|
|
__espi_set_mode(fsl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_child_pre_probe(struct udevice *dev)
|
|
{
|
|
struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev);
|
|
struct udevice *bus = dev->parent;
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
debug("%s cs %u\n", __func__, slave_plat->cs);
|
|
fsl->cs = slave_plat->cs;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_espi_probe(struct udevice *bus)
|
|
{
|
|
struct fsl_espi_plat *plat = dev_get_plat(bus);
|
|
struct fsl_spi_slave *fsl = dev_get_priv(bus);
|
|
|
|
fsl->espi = (ccsr_espi_t *)((u32)plat->regs_addr);
|
|
fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN;
|
|
fsl->speed_hz = plat->speed_hz;
|
|
|
|
debug("%s probe done, bus-num %d.\n", bus->name, dev_seq(bus));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops fsl_espi_ops = {
|
|
.claim_bus = fsl_espi_claim_bus,
|
|
.release_bus = fsl_espi_release_bus,
|
|
.xfer = fsl_espi_xfer,
|
|
.set_speed = fsl_espi_set_speed,
|
|
.set_mode = fsl_espi_set_mode,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int fsl_espi_of_to_plat(struct udevice *bus)
|
|
{
|
|
fdt_addr_t addr;
|
|
struct fsl_espi_plat *plat = dev_get_plat(bus);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
|
|
addr = dev_read_addr(bus);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->regs_addr = lower_32_bits(addr);
|
|
plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
|
|
FSL_ESPI_DEFAULT_SCK_FREQ);
|
|
|
|
debug("ESPI: regs=%p, max-frequency=%d\n",
|
|
&plat->regs_addr, plat->speed_hz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id fsl_espi_ids[] = {
|
|
{ .compatible = "fsl,mpc8536-espi" },
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
U_BOOT_DRIVER(fsl_espi) = {
|
|
.name = "fsl_espi",
|
|
.id = UCLASS_SPI,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.of_match = fsl_espi_ids,
|
|
.of_to_plat = fsl_espi_of_to_plat,
|
|
#endif
|
|
.ops = &fsl_espi_ops,
|
|
.plat_auto = sizeof(struct fsl_espi_plat),
|
|
.priv_auto = sizeof(struct fsl_spi_slave),
|
|
.probe = fsl_espi_probe,
|
|
.child_pre_probe = fsl_espi_child_pre_probe,
|
|
};
|
|
#endif
|