mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
41575d8e4c
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
184 lines
4.7 KiB
C
184 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static int rk3368_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3368_PULL_GRF_OFFSET 0x100
|
|
#define RK3368_PULL_PMU_OFFSET 0x10
|
|
|
|
static void rk3368_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3368_PULL_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3368_PULL_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3368_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit, type;
|
|
u32 data;
|
|
|
|
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
|
|
return -ENOTSUPP;
|
|
|
|
rk3368_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
type = bank->pull_type[pin_num / 8];
|
|
ret = rockchip_translate_pull_value(type, pull);
|
|
if (ret < 0) {
|
|
debug("unsupported pull setting %d\n", pull);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3368_DRV_PMU_OFFSET 0x20
|
|
#define RK3368_DRV_GRF_OFFSET 0x200
|
|
|
|
static void rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3368_DRV_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3368_DRV_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
|
|
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3368_set_drive(struct rockchip_pin_bank *bank,
|
|
int pin_num, int strength)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u32 data;
|
|
u8 bit;
|
|
int type = bank->drv[pin_num / 8].drv_type;
|
|
|
|
rk3368_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
ret = rockchip_translate_drive_value(type, strength);
|
|
if (ret < 0) {
|
|
debug("unsupported driver strength %d\n", strength);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3368_pin_banks[] = {
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU
|
|
),
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3368_pin_ctrl = {
|
|
.pin_banks = rk3368_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3368_pin_banks),
|
|
.grf_mux_offset = 0x0,
|
|
.pmu_mux_offset = 0x0,
|
|
.set_mux = rk3368_set_mux,
|
|
.set_pull = rk3368_set_pull,
|
|
.set_drive = rk3368_set_drive,
|
|
};
|
|
|
|
static const struct udevice_id rk3368_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3368-pinctrl",
|
|
.data = (ulong)&rk3368_pin_ctrl
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_rk3368_pinctrl) = {
|
|
.name = "rockchip_rk3368_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3368_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|