mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
0fd3d91152
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
255 lines
6.2 KiB
C
255 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
*
|
|
* Dave Liu <daveliu@freescale.com>
|
|
* based on source code of Shlomi Gridish
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/immap_83xx.h>
|
|
|
|
#if defined(CONFIG_PINCTRL)
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <linux/ioport.h>
|
|
|
|
/**
|
|
* struct qe_io_plat
|
|
*
|
|
* @base: Base register address
|
|
* @num_par_io_ports number of io ports
|
|
*/
|
|
struct qe_io_plat {
|
|
qepio83xx_t *base;
|
|
u32 num_io_ports;
|
|
};
|
|
#endif
|
|
|
|
#define NUM_OF_PINS 32
|
|
|
|
/** qe_cfg_iopin configure one io pin setting
|
|
*
|
|
* @par_io: pointer to parallel I/O base
|
|
* @port: io pin port
|
|
* @pin: io pin number which get configured
|
|
* @dir: direction of io pin 2 bits valid
|
|
* 00 = pin disabled
|
|
* 01 = output
|
|
* 10 = input
|
|
* 11 = pin is I/O
|
|
* @open_drain: is pin open drain
|
|
* @assign: pin assignment registers select the function of the pin
|
|
*/
|
|
static void qe_cfg_iopin(qepio83xx_t *par_io, u8 port, u8 pin, int dir,
|
|
int open_drain, int assign)
|
|
{
|
|
u32 dbit_mask;
|
|
u32 dbit_dir;
|
|
u32 dbit_asgn;
|
|
u32 bit_mask;
|
|
u32 tmp_val;
|
|
int offset;
|
|
|
|
offset = (NUM_OF_PINS - (pin % (NUM_OF_PINS / 2) + 1) * 2);
|
|
|
|
/* Calculate pin location and 2bit mask and dir */
|
|
dbit_mask = (u32)(0x3 << offset);
|
|
dbit_dir = (u32)(dir << offset);
|
|
|
|
/* Setup the direction */
|
|
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
|
|
in_be32(&par_io->ioport[port].dir2) :
|
|
in_be32(&par_io->ioport[port].dir1);
|
|
|
|
if (pin > (NUM_OF_PINS / 2) - 1) {
|
|
out_be32(&par_io->ioport[port].dir2, ~dbit_mask & tmp_val);
|
|
out_be32(&par_io->ioport[port].dir2, dbit_dir | tmp_val);
|
|
} else {
|
|
out_be32(&par_io->ioport[port].dir1, ~dbit_mask & tmp_val);
|
|
out_be32(&par_io->ioport[port].dir1, dbit_dir | tmp_val);
|
|
}
|
|
|
|
/* Calculate pin location for 1bit mask */
|
|
bit_mask = (u32)(1 << (NUM_OF_PINS - (pin + 1)));
|
|
|
|
/* Setup the open drain */
|
|
tmp_val = in_be32(&par_io->ioport[port].podr);
|
|
if (open_drain)
|
|
out_be32(&par_io->ioport[port].podr, bit_mask | tmp_val);
|
|
else
|
|
out_be32(&par_io->ioport[port].podr, ~bit_mask & tmp_val);
|
|
|
|
/* Setup the assignment */
|
|
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
|
|
in_be32(&par_io->ioport[port].ppar2) :
|
|
in_be32(&par_io->ioport[port].ppar1);
|
|
dbit_asgn = (u32)(assign << offset);
|
|
|
|
/* Clear and set 2 bits mask */
|
|
if (pin > (NUM_OF_PINS / 2) - 1) {
|
|
out_be32(&par_io->ioport[port].ppar2, ~dbit_mask & tmp_val);
|
|
out_be32(&par_io->ioport[port].ppar2, dbit_asgn | tmp_val);
|
|
} else {
|
|
out_be32(&par_io->ioport[port].ppar1, ~dbit_mask & tmp_val);
|
|
out_be32(&par_io->ioport[port].ppar1, dbit_asgn | tmp_val);
|
|
}
|
|
}
|
|
|
|
#if !defined(CONFIG_PINCTRL)
|
|
/** qe_config_iopin configure one io pin setting
|
|
*
|
|
* @port: io pin port
|
|
* @pin: io pin number which get configured
|
|
* @dir: direction of io pin 2 bits valid
|
|
* 00 = pin disabled
|
|
* 01 = output
|
|
* 10 = input
|
|
* 11 = pin is I/O
|
|
* @open_drain: is pin open drain
|
|
* @assign: pin assignment registers select the function of the pin
|
|
*/
|
|
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
|
|
{
|
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
qepio83xx_t *par_io = (qepio83xx_t *)&im->qepio;
|
|
|
|
qe_cfg_iopin(par_io, port, pin, dir, open_drain, assign);
|
|
}
|
|
#else
|
|
static int qe_io_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct qe_io_plat *plat = dev_get_plat(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->base = (qepio83xx_t *)addr;
|
|
if (dev_read_u32(dev, "num-ports", &plat->num_io_ports))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* par_io_of_config_node config
|
|
* @dev: pointer to pinctrl device
|
|
* @pio: ofnode of pinconfig property
|
|
*/
|
|
static int par_io_of_config_node(struct udevice *dev, ofnode pio)
|
|
{
|
|
struct qe_io_plat *plat = dev_get_plat(dev);
|
|
qepio83xx_t *par_io = plat->base;
|
|
const unsigned int *pio_map;
|
|
int pio_map_len;
|
|
|
|
pio_map = ofnode_get_property(pio, "pio-map", &pio_map_len);
|
|
if (!pio_map)
|
|
return -ENOENT;
|
|
|
|
pio_map_len /= sizeof(unsigned int);
|
|
if ((pio_map_len % 6) != 0) {
|
|
dev_err(dev, "%s: pio-map format wrong!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (pio_map_len > 0) {
|
|
/*
|
|
* column pio_map[5] from linux (has_irq) not
|
|
* supported in u-boot yet.
|
|
*/
|
|
qe_cfg_iopin(par_io, (u8)pio_map[0], (u8)pio_map[1],
|
|
(int)pio_map[2], (int)pio_map[3],
|
|
(int)pio_map[4]);
|
|
pio_map += 6;
|
|
pio_map_len -= 6;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int par_io_of_config(struct udevice *dev)
|
|
{
|
|
u32 phandle;
|
|
ofnode pio;
|
|
int err;
|
|
|
|
err = ofnode_read_u32(dev_ofnode(dev), "pio-handle", &phandle);
|
|
if (err) {
|
|
dev_err(dev, "%s: pio-handle not available\n", __func__);
|
|
return err;
|
|
}
|
|
|
|
pio = ofnode_get_by_phandle(phandle);
|
|
if (!ofnode_valid(pio)) {
|
|
dev_err(dev, "%s: unable to find node\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* To Do: find pinctrl device and pass it */
|
|
return par_io_of_config_node(NULL, pio);
|
|
}
|
|
|
|
/*
|
|
* This is not nice!
|
|
* pinsettings should work with "pinctrl-" properties.
|
|
* Unfortunately on mpc83xx powerpc linux device trees
|
|
* devices handle this with "pio-handle" properties ...
|
|
*
|
|
* Even worser, old board code inits all par_io
|
|
* pins in one step, if U-Boot uses the device
|
|
* or not. So init all par_io definitions here too
|
|
* as linux does this also.
|
|
*/
|
|
static void config_qe_ioports(struct udevice *dev)
|
|
{
|
|
ofnode ofn;
|
|
|
|
for (ofn = dev_read_first_subnode(dev); ofnode_valid(ofn);
|
|
ofn = dev_read_next_subnode(ofn)) {
|
|
/*
|
|
* ignore errors here, as may the subnode
|
|
* has no pio-handle
|
|
*/
|
|
par_io_of_config_node(dev, ofn);
|
|
}
|
|
}
|
|
|
|
static int par_io_pinctrl_probe(struct udevice *dev)
|
|
{
|
|
config_qe_ioports(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int par_io_pinctrl_set_state(struct udevice *dev, struct udevice *config)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
const struct pinctrl_ops par_io_pinctrl_ops = {
|
|
.set_state = par_io_pinctrl_set_state,
|
|
};
|
|
|
|
static const struct udevice_id par_io_pinctrl_match[] = {
|
|
{ .compatible = "fsl,mpc8360-par_io"},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(par_io_pinctrl) = {
|
|
.name = "par-io-pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = of_match_ptr(par_io_pinctrl_match),
|
|
.probe = par_io_pinctrl_probe,
|
|
.of_to_plat = qe_io_of_to_plat,
|
|
.plat_auto = sizeof(struct qe_io_plat),
|
|
.ops = &par_io_pinctrl_ops,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
#endif
|
|
};
|
|
#endif
|