mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
97bf73762f
If no GPIO controller is found, the return value should not depend on a random value on the stack. Initialize variable ret. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
654 lines
15 KiB
C
654 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
* Author: Ryder Lee <ryder.lee@mediatek.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "pinctrl-mtk-common.h"
|
|
|
|
#if CONFIG_IS_ENABLED(PINCONF)
|
|
/**
|
|
* struct mtk_drive_desc - the structure that holds the information
|
|
* of the driving current
|
|
* @min: the minimum current of this group
|
|
* @max: the maximum current of this group
|
|
* @step: the step current of this group
|
|
* @scal: the weight factor
|
|
*
|
|
* formula: output = ((input) / step - 1) * scal
|
|
*/
|
|
struct mtk_drive_desc {
|
|
u8 min;
|
|
u8 max;
|
|
u8 step;
|
|
u8 scal;
|
|
};
|
|
|
|
/* The groups of drive strength */
|
|
static const struct mtk_drive_desc mtk_drive[] = {
|
|
[DRV_GRP0] = { 4, 16, 4, 1 },
|
|
[DRV_GRP1] = { 4, 16, 4, 2 },
|
|
[DRV_GRP2] = { 2, 8, 2, 1 },
|
|
[DRV_GRP3] = { 2, 8, 2, 2 },
|
|
[DRV_GRP4] = { 2, 16, 2, 1 },
|
|
};
|
|
#endif
|
|
|
|
static const char *mtk_pinctrl_dummy_name = "_dummy";
|
|
|
|
static void mtk_w32(struct udevice *dev, u32 reg, u32 val)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
__raw_writel(val, priv->base + reg);
|
|
}
|
|
|
|
static u32 mtk_r32(struct udevice *dev, u32 reg)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
return __raw_readl(priv->base + reg);
|
|
}
|
|
|
|
static inline int get_count_order(unsigned int count)
|
|
{
|
|
int order;
|
|
|
|
order = fls(count) - 1;
|
|
if (count & (count - 1))
|
|
order++;
|
|
return order;
|
|
}
|
|
|
|
void mtk_rmw(struct udevice *dev, u32 reg, u32 mask, u32 set)
|
|
{
|
|
u32 val;
|
|
|
|
val = mtk_r32(dev, reg);
|
|
val &= ~mask;
|
|
val |= set;
|
|
mtk_w32(dev, reg, val);
|
|
}
|
|
|
|
static int mtk_hw_pin_field_lookup(struct udevice *dev, int pin,
|
|
const struct mtk_pin_reg_calc *rc,
|
|
struct mtk_pin_field *pfd)
|
|
{
|
|
const struct mtk_pin_field_calc *c, *e;
|
|
u32 bits;
|
|
|
|
c = rc->range;
|
|
e = c + rc->nranges;
|
|
|
|
while (c < e) {
|
|
if (pin >= c->s_pin && pin <= c->e_pin)
|
|
break;
|
|
c++;
|
|
}
|
|
|
|
if (c >= e)
|
|
return -EINVAL;
|
|
|
|
/* Calculated bits as the overall offset the pin is located at,
|
|
* if c->fixed is held, that determines the all the pins in the
|
|
* range use the same field with the s_pin.
|
|
*/
|
|
bits = c->fixed ? c->s_bit : c->s_bit + (pin - c->s_pin) * (c->x_bits);
|
|
|
|
/* Fill pfd from bits. For example 32-bit register applied is assumed
|
|
* when c->sz_reg is equal to 32.
|
|
*/
|
|
pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg);
|
|
pfd->bitpos = bits % c->sz_reg;
|
|
pfd->mask = (1 << c->x_bits) - 1;
|
|
|
|
/* pfd->next is used for indicating that bit wrapping-around happens
|
|
* which requires the manipulation for bit 0 starting in the next
|
|
* register to form the complete field read/write.
|
|
*/
|
|
pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_hw_pin_field_get(struct udevice *dev, int pin,
|
|
int field, struct mtk_pin_field *pfd)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const struct mtk_pin_reg_calc *rc;
|
|
|
|
if (field < 0 || field >= PINCTRL_PIN_REG_MAX)
|
|
return -EINVAL;
|
|
|
|
if (priv->soc->reg_cal && priv->soc->reg_cal[field].range)
|
|
rc = &priv->soc->reg_cal[field];
|
|
else
|
|
return -EINVAL;
|
|
|
|
return mtk_hw_pin_field_lookup(dev, pin, rc, pfd);
|
|
}
|
|
|
|
static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
|
|
{
|
|
*l = 32 - pf->bitpos;
|
|
*h = get_count_order(pf->mask) - *l;
|
|
}
|
|
|
|
static void mtk_hw_write_cross_field(struct udevice *dev,
|
|
struct mtk_pin_field *pf, int value)
|
|
{
|
|
int nbits_l, nbits_h;
|
|
|
|
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
|
|
|
|
mtk_rmw(dev, pf->offset, pf->mask << pf->bitpos,
|
|
(value & pf->mask) << pf->bitpos);
|
|
|
|
mtk_rmw(dev, pf->offset + pf->next, BIT(nbits_h) - 1,
|
|
(value & pf->mask) >> nbits_l);
|
|
}
|
|
|
|
static void mtk_hw_read_cross_field(struct udevice *dev,
|
|
struct mtk_pin_field *pf, int *value)
|
|
{
|
|
int nbits_l, nbits_h, h, l;
|
|
|
|
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
|
|
|
|
l = (mtk_r32(dev, pf->offset) >> pf->bitpos) & (BIT(nbits_l) - 1);
|
|
h = (mtk_r32(dev, pf->offset + pf->next)) & (BIT(nbits_h) - 1);
|
|
|
|
*value = (h << nbits_l) | l;
|
|
}
|
|
|
|
static int mtk_hw_set_value(struct udevice *dev, int pin, int field,
|
|
int value)
|
|
{
|
|
struct mtk_pin_field pf;
|
|
int err;
|
|
|
|
err = mtk_hw_pin_field_get(dev, pin, field, &pf);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pf.next)
|
|
mtk_rmw(dev, pf.offset, pf.mask << pf.bitpos,
|
|
(value & pf.mask) << pf.bitpos);
|
|
else
|
|
mtk_hw_write_cross_field(dev, &pf, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_hw_get_value(struct udevice *dev, int pin, int field,
|
|
int *value)
|
|
{
|
|
struct mtk_pin_field pf;
|
|
int err;
|
|
|
|
err = mtk_hw_pin_field_get(dev, pin, field, &pf);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pf.next)
|
|
*value = (mtk_r32(dev, pf.offset) >> pf.bitpos) & pf.mask;
|
|
else
|
|
mtk_hw_read_cross_field(dev, &pf, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_get_groups_count(struct udevice *dev)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
return priv->soc->ngrps;
|
|
}
|
|
|
|
static const char *mtk_get_pin_name(struct udevice *dev,
|
|
unsigned int selector)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!priv->soc->grps[selector].name)
|
|
return mtk_pinctrl_dummy_name;
|
|
|
|
return priv->soc->pins[selector].name;
|
|
}
|
|
|
|
static int mtk_get_pins_count(struct udevice *dev)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
return priv->soc->npins;
|
|
}
|
|
|
|
static const char *mtk_get_group_name(struct udevice *dev,
|
|
unsigned int selector)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!priv->soc->grps[selector].name)
|
|
return mtk_pinctrl_dummy_name;
|
|
|
|
return priv->soc->grps[selector].name;
|
|
}
|
|
|
|
static int mtk_get_functions_count(struct udevice *dev)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
return priv->soc->nfuncs;
|
|
}
|
|
|
|
static const char *mtk_get_function_name(struct udevice *dev,
|
|
unsigned int selector)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!priv->soc->funcs[selector].name)
|
|
return mtk_pinctrl_dummy_name;
|
|
|
|
return priv->soc->funcs[selector].name;
|
|
}
|
|
|
|
static int mtk_pinmux_group_set(struct udevice *dev,
|
|
unsigned int group_selector,
|
|
unsigned int func_selector)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const struct mtk_group_desc *grp =
|
|
&priv->soc->grps[group_selector];
|
|
int i;
|
|
|
|
for (i = 0; i < grp->num_pins; i++) {
|
|
int *pin_modes = grp->data;
|
|
|
|
mtk_hw_set_value(dev, grp->pins[i], PINCTRL_PIN_REG_MODE,
|
|
pin_modes[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(PINCONF)
|
|
static const struct pinconf_param mtk_conf_params[] = {
|
|
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
|
|
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
|
|
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
|
|
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
|
|
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
|
|
{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
|
|
{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
|
|
{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
|
|
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
|
|
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
|
|
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
|
|
};
|
|
|
|
|
|
int mtk_pinconf_bias_set_v0(struct udevice *dev, u32 pin, u32 arg, u32 val)
|
|
{
|
|
int err, disable, pullup;
|
|
|
|
disable = (arg == PIN_CONFIG_BIAS_DISABLE);
|
|
pullup = (arg == PIN_CONFIG_BIAS_PULL_UP);
|
|
|
|
if (disable) {
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PU, 0);
|
|
if (err)
|
|
return err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PD, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
} else {
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PU, pullup);
|
|
if (err)
|
|
return err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PD, !pullup);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pinconf_bias_set_v1(struct udevice *dev, u32 pin, u32 arg, u32 val)
|
|
{
|
|
int err, disable, pullup, r0, r1;
|
|
|
|
disable = (arg == PIN_CONFIG_BIAS_DISABLE);
|
|
pullup = (arg == PIN_CONFIG_BIAS_PULL_UP);
|
|
r0 = !!(val & 1);
|
|
r1 = !!(val & 2);
|
|
|
|
if (disable) {
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLEN, 0);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLEN, 1);
|
|
if (err)
|
|
return err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLSEL,
|
|
pullup);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
/* Also set PUPD/R0/R1 if the pin has them */
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PUPD, !pullup);
|
|
if (err != -EINVAL) {
|
|
mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R0, r0);
|
|
mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R1, r1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pinconf_input_enable_v1(struct udevice *dev, u32 pin, u32 arg)
|
|
{
|
|
int err;
|
|
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_IES, 1);
|
|
if (err)
|
|
return err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 0);
|
|
if (err)
|
|
return err;
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pinconf_drive_set_v0(struct udevice *dev, u32 pin, u32 arg)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const struct mtk_pin_desc *desc = &priv->soc->pins[pin];
|
|
const struct mtk_drive_desc *tb;
|
|
int err = -ENOTSUPP;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
/* 4mA when (e8, e4) = (0, 0)
|
|
* 8mA when (e8, e4) = (0, 1)
|
|
* 12mA when (e8, e4) = (1, 0)
|
|
* 16mA when (e8, e4) = (1, 1)
|
|
*/
|
|
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
|
|
arg = (arg / tb->step - 1) * tb->scal;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_E4,
|
|
arg & 0x1);
|
|
if (err)
|
|
return err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_E8,
|
|
(arg & 0x2) >> 1);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
int mtk_pinconf_drive_set_v1(struct udevice *dev, u32 pin, u32 arg)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const struct mtk_pin_desc *desc = &priv->soc->pins[pin];
|
|
const struct mtk_drive_desc *tb;
|
|
int err = -ENOTSUPP;
|
|
|
|
tb = &mtk_drive[desc->drv_n];
|
|
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
|
|
arg = (arg / tb->step - 1) * tb->scal;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DRV, arg);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_pinconf_set(struct udevice *dev, unsigned int pin,
|
|
unsigned int param, unsigned int arg)
|
|
{
|
|
int err = 0;
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
int rev = priv->soc->rev;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
if (rev == MTK_PINCTRL_V0)
|
|
err = mtk_pinconf_bias_set_v0(dev, pin, param, arg);
|
|
else
|
|
err = mtk_pinconf_bias_set_v1(dev, pin, param, arg);
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT_ENABLE:
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_SMT, 0);
|
|
if (err)
|
|
goto err;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 1);
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
case PIN_CONFIG_INPUT_ENABLE:
|
|
if (rev == MTK_PINCTRL_V1)
|
|
err = mtk_pinconf_input_enable_v1(dev, pin, param);
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
case PIN_CONFIG_OUTPUT:
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 1);
|
|
if (err)
|
|
goto err;
|
|
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DO, arg);
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
/* arg = 1: Input mode & SMT enable ;
|
|
* arg = 0: Output mode & SMT disable
|
|
*/
|
|
arg = arg ? 2 : 1;
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR,
|
|
arg & 1);
|
|
if (err)
|
|
goto err;
|
|
|
|
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_SMT,
|
|
!!(arg & 2));
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
if (rev == MTK_PINCTRL_V0)
|
|
err = mtk_pinconf_drive_set_v0(dev, pin, arg);
|
|
else
|
|
err = mtk_pinconf_drive_set_v1(dev, pin, arg);
|
|
if (err)
|
|
goto err;
|
|
break;
|
|
|
|
default:
|
|
err = -ENOTSUPP;
|
|
}
|
|
|
|
err:
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mtk_pinconf_group_set(struct udevice *dev,
|
|
unsigned int group_selector,
|
|
unsigned int param, unsigned int arg)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
const struct mtk_group_desc *grp =
|
|
&priv->soc->grps[group_selector];
|
|
int i, ret;
|
|
|
|
for (i = 0; i < grp->num_pins; i++) {
|
|
ret = mtk_pinconf_set(dev, grp->pins[i], param, arg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
const struct pinctrl_ops mtk_pinctrl_ops = {
|
|
.get_pins_count = mtk_get_pins_count,
|
|
.get_pin_name = mtk_get_pin_name,
|
|
.get_groups_count = mtk_get_groups_count,
|
|
.get_group_name = mtk_get_group_name,
|
|
.get_functions_count = mtk_get_functions_count,
|
|
.get_function_name = mtk_get_function_name,
|
|
.pinmux_group_set = mtk_pinmux_group_set,
|
|
#if CONFIG_IS_ENABLED(PINCONF)
|
|
.pinconf_num_params = ARRAY_SIZE(mtk_conf_params),
|
|
.pinconf_params = mtk_conf_params,
|
|
.pinconf_set = mtk_pinconf_set,
|
|
.pinconf_group_set = mtk_pinconf_group_set,
|
|
#endif
|
|
.set_state = pinctrl_generic_set_state,
|
|
};
|
|
|
|
static int mtk_gpio_get(struct udevice *dev, unsigned int off)
|
|
{
|
|
int val, err;
|
|
|
|
err = mtk_hw_get_value(dev->parent, off, PINCTRL_PIN_REG_DI, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
return !!val;
|
|
}
|
|
|
|
static int mtk_gpio_set(struct udevice *dev, unsigned int off, int val)
|
|
{
|
|
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DO, !!val);
|
|
}
|
|
|
|
static int mtk_gpio_get_direction(struct udevice *dev, unsigned int off)
|
|
{
|
|
int val, err;
|
|
|
|
err = mtk_hw_get_value(dev->parent, off, PINCTRL_PIN_REG_DIR, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
return val ? GPIOF_OUTPUT : GPIOF_INPUT;
|
|
}
|
|
|
|
static int mtk_gpio_direction_input(struct udevice *dev, unsigned int off)
|
|
{
|
|
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DIR, 0);
|
|
}
|
|
|
|
static int mtk_gpio_direction_output(struct udevice *dev,
|
|
unsigned int off, int val)
|
|
{
|
|
mtk_gpio_set(dev, off, val);
|
|
|
|
/* And set the requested value */
|
|
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DIR, 1);
|
|
}
|
|
|
|
static int mtk_gpio_request(struct udevice *dev, unsigned int off,
|
|
const char *label)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev->parent);
|
|
|
|
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_MODE,
|
|
priv->soc->gpio_mode);
|
|
}
|
|
|
|
static int mtk_gpio_probe(struct udevice *dev)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev->parent);
|
|
struct gpio_dev_priv *uc_priv;
|
|
|
|
uc_priv = dev_get_uclass_priv(dev);
|
|
uc_priv->bank_name = priv->soc->name;
|
|
uc_priv->gpio_count = priv->soc->npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_gpio_ops mtk_gpio_ops = {
|
|
.request = mtk_gpio_request,
|
|
.set_value = mtk_gpio_set,
|
|
.get_value = mtk_gpio_get,
|
|
.get_function = mtk_gpio_get_direction,
|
|
.direction_input = mtk_gpio_direction_input,
|
|
.direction_output = mtk_gpio_direction_output,
|
|
};
|
|
|
|
static struct driver mtk_gpio_driver = {
|
|
.name = "mediatek_gpio",
|
|
.id = UCLASS_GPIO,
|
|
.probe = mtk_gpio_probe,
|
|
.ops = &mtk_gpio_ops,
|
|
};
|
|
|
|
static int mtk_gpiochip_register(struct udevice *parent)
|
|
{
|
|
struct uclass_driver *drv;
|
|
struct udevice *dev;
|
|
int ret;
|
|
ofnode node;
|
|
|
|
drv = lists_uclass_lookup(UCLASS_GPIO);
|
|
if (!drv)
|
|
return -ENOENT;
|
|
|
|
ret = -ENOENT;
|
|
dev_for_each_subnode(node, parent)
|
|
if (ofnode_read_bool(node, "gpio-controller")) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = device_bind_with_driver_data(parent, &mtk_gpio_driver,
|
|
"mediatek_gpio", 0, node,
|
|
&dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mtk_pinctrl_common_probe(struct udevice *dev,
|
|
struct mtk_pinctrl_soc *soc)
|
|
{
|
|
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->base = dev_read_addr_ptr(dev);
|
|
if (!priv->base)
|
|
return -EINVAL;
|
|
|
|
priv->soc = soc;
|
|
|
|
ret = mtk_gpiochip_register(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|