Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-22 03:03:05 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/compulab/cm_fx6/cm_fx6.c
Simon Glass 20e442ab2d dm: Rename U_BOOT_DEVICE() to U_BOOT_DRVINFO() 
The current macro is a misnomer since it does not declare a device
directly. Instead, it declares driver_info record which U-Boot uses at
runtime to create a device.

The distinction seems somewhat minor most of the time, but is becomes
quite confusing when we actually want to declare a device, with
of-platdata. We are left trying to distinguish between a device which
isn't actually device, and a device that is (perhaps an 'instance'?)

It seems better to rename this macro to describe what it actually is. The
macros is not widely used, since boards should use devicetree to declare
devices.

Rename it to U_BOOT_DRVINFO(), which indicates clearly that this is
declaring a new driver_info record, not a device.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05 12:26:35 -07:00

797 lines
20 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Board functions for Compulab CM-FX6 board
*
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
*
* Author: Nikita Kiryanov <nikita@compulab.co.il>
*/
#include <common.h>
#include <ahci.h>
#include <dm.h>
#include <dwc_ahsata.h>
#include <env.h>
#include <fsl_esdhc_imx.h>
#include <init.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <net.h>
#include <netdev.h>
#include <errno.h>
#include <usb.h>
#include <fdt_support.h>
#include <sata.h>
#include <splash.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <asm/mach-imx/video.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <dm/platform_data/serial_mxc.h>
#include <dm/device-internal.h>
#include <jffs2/load_kernel.h>
#include <linux/delay.h>
#include "common.h"
#include "../common/eeprom.h"
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPLASH_SCREEN
static struct splash_location cm_fx6_splash_locations[] = {
{
.name = "sf",
.storage = SPLASH_STORAGE_SF,
.flags = SPLASH_STORAGE_RAW,
.offset = 0x100000,
},
{
.name = "mmc_fs",
.storage = SPLASH_STORAGE_MMC,
.flags = SPLASH_STORAGE_FS,
.devpart = "2:1",
},
{
.name = "usb_fs",
.storage = SPLASH_STORAGE_USB,
.flags = SPLASH_STORAGE_FS,
.devpart = "0:1",
},
{
.name = "sata_fs",
.storage = SPLASH_STORAGE_SATA,
.flags = SPLASH_STORAGE_FS,
.devpart = "0:1",
},
};
int splash_screen_prepare(void)
{
return splash_source_load(cm_fx6_splash_locations,
ARRAY_SIZE(cm_fx6_splash_locations));
}
#endif
#ifdef CONFIG_IMX_HDMI
static void cm_fx6_enable_hdmi(struct display_info_t const *dev)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
imx_setup_hdmi();
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
imx_enable_hdmi_phy();
}
static struct display_info_t preset_hdmi_1024X768 = {
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.enable = cm_fx6_enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 40385,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED,
}
};
static void cm_fx6_setup_display(void)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_ipu_clock();
clrbits_le32(&iomuxc_regs->gpr[3], MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK);
}
int board_video_skip(void)
{
int ret;
struct display_info_t *preset;
char const *panel = env_get("displaytype");
if (!panel) /* Also accept panel for backward compatibility */
panel = env_get("panel");
if (!panel)
return -ENOENT;
if (!strcmp(panel, "HDMI"))
preset = &preset_hdmi_1024X768;
else
return -EINVAL;
ret = ipuv3_fb_init(&preset->mode, 0, preset->pixfmt);
if (ret) {
printf("Can't init display %s: %d\n", preset->mode.name, ret);
return ret;
}
preset->enable(preset);
printf("Display: %s (%ux%u)\n", preset->mode.name, preset->mode.xres,
preset->mode.yres);
return 0;
}
#else
static inline void cm_fx6_setup_display(void) {}
#endif /* CONFIG_VIDEO_IPUV3 */
int ipu_displays_init(void)
{
return board_video_skip();
}
#ifdef CONFIG_DWC_AHSATA
static int cm_fx6_issd_gpios[] = {
/* The order of the GPIOs in the array is important! */
CM_FX6_SATA_LDO_EN,
CM_FX6_SATA_PHY_SLP,
CM_FX6_SATA_NRSTDLY,
CM_FX6_SATA_PWREN,
CM_FX6_SATA_NSTANDBY1,
CM_FX6_SATA_NSTANDBY2,
};
static void cm_fx6_sata_power(int on)
{
int i;
if (!on) { /* tell the iSSD that the power will be removed */
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 1);
mdelay(10);
}
for (i = 0; i < ARRAY_SIZE(cm_fx6_issd_gpios); i++) {
gpio_direction_output(cm_fx6_issd_gpios[i], on);
udelay(100);
}
if (!on) /* for compatibility lower the power loss interrupt */
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0);
}
static iomux_v3_cfg_t const sata_pads[] = {
/* SATA PWR */
IOMUX_PADS(PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
/* SATA CTRL */
IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static int cm_fx6_setup_issd(void)
{
int ret, i;
SETUP_IOMUX_PADS(sata_pads);
for (i = 0; i < ARRAY_SIZE(cm_fx6_issd_gpios); i++) {
ret = gpio_request(cm_fx6_issd_gpios[i], "sata");
if (ret)
return ret;
}
ret = gpio_request(CM_FX6_SATA_PWLOSS_INT, "sata_pwloss_int");
if (ret)
return ret;
return 0;
}
#define CM_FX6_SATA_INIT_RETRIES 10
#else
static int cm_fx6_setup_issd(void) { return 0; }
#endif
#ifdef CONFIG_SYS_I2C_MXC
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
I2C_PADS(i2c0_pads,
PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_EIM_D21__GPIO3_IO21 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(3, 21),
PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_EIM_D28__GPIO3_IO28 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(3, 28));
I2C_PADS(i2c1_pads,
PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_KEY_COL3__GPIO4_IO12 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(4, 12),
PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_KEY_ROW3__GPIO4_IO13 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(4, 13));
I2C_PADS(i2c2_pads,
PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(1, 3),
PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(I2C_PAD_CTRL),
IMX_GPIO_NR(1, 6));
static int cm_fx6_setup_one_i2c(int busnum, struct i2c_pads_info *pads)
{
int ret;
ret = setup_i2c(busnum, CONFIG_SYS_I2C_SPEED, 0x7f, pads);
if (ret)
printf("Warning: I2C%d setup failed: %d\n", busnum, ret);
return ret;
}
static int cm_fx6_setup_i2c(void)
{
int ret = 0, err;
/* i2c<x>_pads are wierd macro variables; we can't use an array */
err = cm_fx6_setup_one_i2c(0, I2C_PADS_INFO(i2c0_pads));
if (err)
ret = err;
err = cm_fx6_setup_one_i2c(1, I2C_PADS_INFO(i2c1_pads));
if (err)
ret = err;
err = cm_fx6_setup_one_i2c(2, I2C_PADS_INFO(i2c2_pads));
if (err)
ret = err;
return ret;
}
#else
static int cm_fx6_setup_i2c(void) { return 0; }
#endif
#ifdef CONFIG_USB_EHCI_MX6
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
#define MX6_USBNC_BASEADDR 0x2184800
#define USBNC_USB_H1_PWR_POL (1 << 9)
static int cm_fx6_setup_usb_host(void)
{
int err;
err = gpio_request(CM_FX6_USB_HUB_RST, "usb hub rst");
if (err)
return err;
SETUP_IOMUX_PAD(PAD_GPIO_0__USB_H1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL));
SETUP_IOMUX_PAD(PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL));
return 0;
}
static int cm_fx6_setup_usb_otg(void)
{
int err;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
err = gpio_request(SB_FX6_USB_OTG_PWR, "usb-pwr");
if (err) {
printf("USB OTG pwr gpio request failed: %d\n", err);
return err;
}
SETUP_IOMUX_PAD(PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL));
SETUP_IOMUX_PAD(PAD_ENET_RX_ER__USB_OTG_ID |
MUX_PAD_CTRL(WEAK_PULLDOWN));
clrbits_le32(&iomux->gpr[1], IOMUXC_GPR1_OTG_ID_MASK);
/* disable ext. charger detect, or it'll affect signal quality at dp. */
return gpio_direction_output(SB_FX6_USB_OTG_PWR, 0);
}
int board_usb_phy_mode(int port)
{
return USB_INIT_HOST;
}
int board_ehci_hcd_init(int port)
{
int ret;
u32 *usbnc_usb_uh1_ctrl = (u32 *)(MX6_USBNC_BASEADDR + 4);
/* Only 1 host controller in use. port 0 is OTG & needs no attention */
if (port != 1)
return 0;
/* Set PWR polarity to match power switch's enable polarity */
setbits_le32(usbnc_usb_uh1_ctrl, USBNC_USB_H1_PWR_POL);
ret = gpio_direction_output(CM_FX6_USB_HUB_RST, 0);
if (ret)
return ret;
udelay(10);
ret = gpio_direction_output(CM_FX6_USB_HUB_RST, 1);
if (ret)
return ret;
mdelay(1);
return 0;
}
int board_ehci_power(int port, int on)
{
if (port == 0)
return gpio_direction_output(SB_FX6_USB_OTG_PWR, on);
return 0;
}
#else
static int cm_fx6_setup_usb_otg(void) { return 0; }
static int cm_fx6_setup_usb_host(void) { return 0; }
#endif
#ifdef CONFIG_FEC_MXC
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
static int mx6_rgmii_rework(struct phy_device *phydev)
{
unsigned short val;
/* Ar8031 phy SmartEEE feature cause link status generates glitch,
* which cause ethernet link down/up issue, so disable SmartEEE
*/
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x3);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= ~(0x1 << 8);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
val &= 0xffe3;
val |= 0x18;
phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
/* introduce tx clock delay */
phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
val |= 0x0100;
phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
return 0;
}
int board_phy_config(struct phy_device *phydev)
{
mx6_rgmii_rework(phydev);
if (phydev->drv->config)
return phydev->drv->config(phydev);
return 0;
}
static iomux_v3_cfg_t const enet_pads[] = {
IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_0__CCM_CLKO1 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(0x84)),
IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
};
static int handle_mac_address(char *env_var, uint eeprom_bus)
{
unsigned char enetaddr[6];
int rc;
rc = eth_env_get_enetaddr(env_var, enetaddr);
if (rc)
return 0;
rc = cl_eeprom_read_mac_addr(enetaddr, eeprom_bus);
if (rc)
return rc;
if (!is_valid_ethaddr(enetaddr))
return -1;
return eth_env_set_enetaddr(env_var, enetaddr);
}
#define SB_FX6_I2C_EEPROM_BUS 0
#define NO_MAC_ADDR "No MAC address found for %s\n"
int board_eth_init(struct bd_info *bis)
{
int err;
if (handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS))
printf(NO_MAC_ADDR, "primary NIC");
if (handle_mac_address("eth1addr", SB_FX6_I2C_EEPROM_BUS))
printf(NO_MAC_ADDR, "secondary NIC");
SETUP_IOMUX_PADS(enet_pads);
/* phy reset */
err = gpio_request(CM_FX6_ENET_NRST, "enet_nrst");
if (err)
printf("Etnernet NRST gpio request failed: %d\n", err);
gpio_direction_output(CM_FX6_ENET_NRST, 0);
udelay(500);
gpio_set_value(CM_FX6_ENET_NRST, 1);
enable_enet_clk(1);
return cpu_eth_init(bis);
}
#endif
#ifdef CONFIG_NAND_MXS
static iomux_v3_cfg_t const nand_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void cm_fx6_setup_gpmi_nand(void)
{
SETUP_IOMUX_PADS(nand_pads);
/* Enable clock roots */
enable_usdhc_clk(1, 3);
enable_usdhc_clk(1, 4);
setup_gpmi_io_clk(MXC_CCM_CS2CDR_ENFC_CLK_PODF(0xf) |
MXC_CCM_CS2CDR_ENFC_CLK_PRED(1) |
MXC_CCM_CS2CDR_ENFC_CLK_SEL(0));
}
#else
static void cm_fx6_setup_gpmi_nand(void) {}
#endif
#ifdef CONFIG_MXC_SPI
int cm_fx6_setup_ecspi(void)
{
cm_fx6_set_ecspi_iomux();
return gpio_request(CM_FX6_ECSPI_BUS0_CS0, "ecspi_bus0_cs0");
}
#else
int cm_fx6_setup_ecspi(void) { return 0; }
#endif
#ifdef CONFIG_OF_BOARD_SETUP
#define USDHC3_PATH "/soc/aips-bus@02100000/usdhc@02198000/"
static const struct node_info nodes[] = {
/*
* Both entries target the same flash chip. The st,m25p compatible
* is used in the vendor device trees, while upstream uses (the
* documented) jedec,spi-nor compatible.
*/
{ "st,m25p", MTD_DEV_TYPE_NOR, },
{ "jedec,spi-nor", MTD_DEV_TYPE_NOR, },
};
int ft_board_setup(void *blob, struct bd_info *bd)
{
u32 baseboard_rev;
int nodeoffset;
uint8_t enetaddr[6];
char baseboard_name[16];
int err;
fdt_shrink_to_minimum(blob, 0); /* Make room for new properties */
/* MAC addr */
if (eth_env_get_enetaddr("ethaddr", enetaddr)) {
fdt_find_and_setprop(blob,
"/soc/aips-bus@02100000/ethernet@02188000",
"local-mac-address", enetaddr, 6, 1);
}
if (eth_env_get_enetaddr("eth1addr", enetaddr)) {
fdt_find_and_setprop(blob, "/eth@pcie", "local-mac-address",
enetaddr, 6, 1);
}
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
baseboard_rev = cl_eeprom_get_board_rev(0);
err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
if (err || baseboard_rev == 0)
return 0; /* Assume not an early revision SB-FX6m baseboard */
if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
fdt_delprop(blob, nodeoffset, "cd-gpios");
fdt_find_and_setprop(blob, USDHC3_PATH, "broken-cd",
NULL, 0, 1);
fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
NULL, 0, 1);
}
return 0;
}
#endif
int board_init(void)
{
int ret;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
cm_fx6_setup_gpmi_nand();
ret = cm_fx6_setup_ecspi();
if (ret)
printf("Warning: ECSPI setup failed: %d\n", ret);
ret = cm_fx6_setup_usb_otg();
if (ret)
printf("Warning: USB OTG setup failed: %d\n", ret);
ret = cm_fx6_setup_usb_host();
if (ret)
printf("Warning: USB host setup failed: %d\n", ret);
/*
* cm-fx6 may have iSSD not assembled and in this case it has
* bypasses for a (m)SATA socket on the baseboard. The socketed
* device is not controlled by those GPIOs. So just print a warning
* if the setup fails.
*/
ret = cm_fx6_setup_issd();
if (ret)
printf("Warning: iSSD setup failed: %d\n", ret);
/* Warn on failure but do not abort boot */
ret = cm_fx6_setup_i2c();
if (ret)
printf("Warning: I2C setup failed: %d\n", ret);
cm_fx6_setup_display();
/* This should be done in the MMC driver when MX6 has a clock driver */
#ifdef CONFIG_FSL_ESDHC_IMX
if (IS_ENABLED(CONFIG_BLK)) {
int i;
cm_fx6_set_usdhc_iomux();
for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++)
enable_usdhc_clk(1, i);
}
#endif
return 0;
}
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
char baseboard_name[16];
int err;
if (is_mx6dq())
env_set("board_rev", "MX6Q");
else if (is_mx6dl())
env_set("board_rev", "MX6DL");
err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
if (err)
return 0;
if (!strncmp("SB-FX6m", baseboard_name, 7))
env_set("board_name", "Utilite");
#endif
return 0;
}
int checkboard(void)
{
puts("Board: CM-FX6\n");
return 0;
}
int misc_init_r(void)
{
cl_print_pcb_info();
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
switch (gd->ram_size) {
case 0x10000000: /* DDR_16BIT_256MB */
gd->bd->bi_dram[0].size = 0x10000000;
gd->bd->bi_dram[1].size = 0;
break;
case 0x20000000: /* DDR_32BIT_512MB */
gd->bd->bi_dram[0].size = 0x20000000;
gd->bd->bi_dram[1].size = 0;
break;
case 0x40000000:
if (is_cpu_type(MXC_CPU_MX6SOLO)) { /* DDR_32BIT_1GB */
gd->bd->bi_dram[0].size = 0x20000000;
gd->bd->bi_dram[1].size = 0x20000000;
} else { /* DDR_64BIT_1GB */
gd->bd->bi_dram[0].size = 0x40000000;
gd->bd->bi_dram[1].size = 0;
}
break;
case 0x80000000: /* DDR_64BIT_2GB */
gd->bd->bi_dram[0].size = 0x40000000;
gd->bd->bi_dram[1].size = 0x40000000;
break;
case 0xEFF00000: /* DDR_64BIT_4GB */
gd->bd->bi_dram[0].size = 0x70000000;
gd->bd->bi_dram[1].size = 0x7FF00000;
break;
}
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
switch (gd->ram_size) {
case 0x10000000:
case 0x20000000:
case 0x40000000:
case 0x80000000:
break;
case 0xF0000000:
gd->ram_size -= 0x100000;
break;
default:
printf("ERROR: Unsupported DRAM size 0x%lx\n", gd->ram_size);
return -1;
}
return 0;
}
u32 get_board_rev(void)
{
return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS);
}
static struct mxc_serial_plat cm_fx6_mxc_serial_plat = {
.reg = (struct mxc_uart *)UART4_BASE,
};
U_BOOT_DRVINFO(cm_fx6_serial) = {
.name = "serial_mxc",
.plat = &cm_fx6_mxc_serial_plat,
};
#if CONFIG_IS_ENABLED(AHCI)
static int sata_imx_probe(struct udevice *dev)
{
int i, err;
/* Make sure this gpio has logical 0 value */
gpio_direction_output(CM_FX6_SATA_PWLOSS_INT, 0);
udelay(100);
cm_fx6_sata_power(1);
for (i = 0; i < CM_FX6_SATA_INIT_RETRIES; i++) {
err = setup_sata();
if (err) {
printf("SATA setup failed: %d\n", err);
return err;
}
udelay(100);
err = dwc_ahsata_probe(dev);
if (!err)
break;
/* There is no device on the SATA port */
if (sata_dm_port_status(0, 0) == 0)
break;
/* There's a device, but link not established. Retry */
device_remove(dev, DM_REMOVE_NORMAL);
}
return 0;
}
static int sata_imx_remove(struct udevice *dev)
{
cm_fx6_sata_power(0);
mdelay(250);
return 0;
}
struct ahci_ops sata_imx_ops = {
.port_status = dwc_ahsata_port_status,
.reset = dwc_ahsata_bus_reset,
.scan = dwc_ahsata_scan,
};
static const struct udevice_id sata_imx_ids[] = {
{ .compatible = "fsl,imx6q-ahci" },
{ }
};
U_BOOT_DRIVER(sata_imx) = {
.name = "dwc_ahci",
.id = UCLASS_AHCI,
.of_match = sata_imx_ids,
.ops = &sata_imx_ops,
.probe = sata_imx_probe,
.remove = sata_imx_remove, /* reset bus to stop it */
};
#endif /* AHCI */
Reference in a new issue View git blame Copy permalink