u-boot/arch/powerpc/cpu/mpc83xx/start.S
Andreas Bießmann 09c2e90c11 unify version_string
This patch removes the architecture specific implementation of
version_string where possible. Some architectures use a special place
and therefore we provide U_BOOT_VERSION_STRING definition and a common
weak symbol version_string.

Signed-off-by: Andreas Biemann <andreas.devel@googlemail.com>
CC: Mike Frysinger <vapier@gentoo.org>
CC: Peter Pan <pppeterpppan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28 17:22:53 +02:00

1204 lines
30 KiB
ArmAsm

/*
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
* Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
*/
#include <asm-offsets.h>
#include <config.h>
#include <mpc83xx.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING "MPC83XX"
#endif
#include <version.h>
#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <asm/u-boot.h>
/* We don't want the MMU yet.
*/
#undef MSR_KERNEL
/*
* Floating Point enable, Machine Check and Recoverable Interr.
*/
#ifdef DEBUG
#define MSR_KERNEL (MSR_FP|MSR_RI)
#else
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_SYS_FLASHBOOT
#endif
/*
* Set up GOT: Global Offset Table
*
* Use r12 to access the GOT
*/
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(__bss_start)
GOT_ENTRY(__bss_end__)
#ifndef CONFIG_NAND_SPL
GOT_ENTRY(_FIXUP_TABLE_)
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
#endif
END_GOT
/*
* The Hard Reset Configuration Word (HRCW) table is in the first 64
* (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
* times so the processor can fetch it out of flash whether the flash
* is 8, 16, 32, or 64 bits wide (hardware trickery).
*/
.text
#define _HRCW_TABLE_ENTRY(w) \
.fill 8,1,(((w)>>24)&0xff); \
.fill 8,1,(((w)>>16)&0xff); \
.fill 8,1,(((w)>> 8)&0xff); \
.fill 8,1,(((w) )&0xff)
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
_HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
/*
* Magic number and version string - put it after the HRCW since it
* cannot be first in flash like it is in many other processors.
*/
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
.ascii U_BOOT_VERSION_STRING, "\0"
.align 2
.globl enable_addr_trans
enable_addr_trans:
/* enable address translation */
mfmsr r5
ori r5, r5, (MSR_IR | MSR_DR)
mtmsr r5
isync
blr
.globl disable_addr_trans
disable_addr_trans:
/* disable address translation */
mflr r4
mfmsr r3
andi. r0, r3, (MSR_IR | MSR_DR)
beqlr
andc r3, r3, r0
mtspr SRR0, r4
mtspr SRR1, r3
rfi
.globl get_pvr
get_pvr:
mfspr r3, PVR
blr
.globl ppcDWstore
ppcDWstore:
lfd 1, 0(r4)
stfd 1, 0(r3)
blr
.globl ppcDWload
ppcDWload:
lfd 1, 0(r3)
stfd 1, 0(r4)
blr
#ifndef CONFIG_DEFAULT_IMMR
#error CONFIG_DEFAULT_IMMR must be defined
#endif /* CONFIG_SYS_DEFAULT_IMMR */
#ifndef CONFIG_SYS_IMMR
#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
#endif /* CONFIG_SYS_IMMR */
/*
* After configuration, a system reset exception is executed using the
* vector at offset 0x100 relative to the base set by MSR[IP]. If
* MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
* base address is 0xfff00000. In the case of a Power On Reset or Hard
* Reset, the value of MSR[IP] is determined by the CIP field in the
* HRCW.
*
* Other bits in the HRCW set up the Base Address and Port Size in BR0.
* This determines the location of the boot ROM (flash or EPROM) in the
* processor's address space at boot time. As long as the HRCW is set up
* so that we eventually end up executing the code below when the
* processor executes the reset exception, the actual values used should
* not matter.
*
* Once we have got here, the address mask in OR0 is cleared so that the
* bottom 32K of the boot ROM is effectively repeated all throughout the
* processor's address space, after which we can jump to the absolute
* address at which the boot ROM was linked at compile time, and proceed
* to initialise the memory controller without worrying if the rug will
* be pulled out from under us, so to speak (it will be fine as long as
* we configure BR0 with the same boot ROM link address).
*/
. = EXC_OFF_SYS_RESET
.globl _start
_start: /* time t 0 */
lis r4, CONFIG_DEFAULT_IMMR@h
nop
mfmsr r5 /* save msr contents */
/* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
bl 1f
1: mflr r7
lis r3, CONFIG_SYS_IMMR@h
ori r3, r3, CONFIG_SYS_IMMR@l
lwz r6, IMMRBAR(r4)
isync
stw r3, IMMRBAR(r4)
lwz r6, 0(r7) /* Arbitrary external load */
isync
lwz r6, IMMRBAR(r3)
isync
/* Initialise the E300 processor core */
/*------------------------------------------*/
#ifdef CONFIG_NAND_SPL
/* The FCM begins execution after only the first page
* is loaded. Wait for the rest before branching
* to another flash page.
*/
1: lwz r6, 0x50b0(r3)
andi. r6, r6, 1
beq 1b
#endif
bl init_e300_core
#ifdef CONFIG_SYS_FLASHBOOT
/* Inflate flash location so it appears everywhere, calculate */
/* the absolute address in final location of the FLASH, jump */
/* there and deflate the flash size back to minimal size */
/*------------------------------------------------------------*/
bl map_flash_by_law1
lis r4, (CONFIG_SYS_MONITOR_BASE)@h
ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r5
blr
in_flash:
#if 1 /* Remapping flash with LAW0. */
bl remap_flash_by_law0
#endif
#endif /* CONFIG_SYS_FLASHBOOT */
/* setup the bats */
bl setup_bats
sync
/*
* Cache must be enabled here for stack-in-cache trick.
* This means we need to enable the BATS.
* This means:
* 1) for the EVB, original gt regs need to be mapped
* 2) need to have an IBAT for the 0xf region,
* we are running there!
* Cache should be turned on after BATs, since by default
* everything is write-through.
* The init-mem BAT can be reused after reloc. The old
* gt-regs BAT can be reused after board_init_f calls
* board_early_init_f (EVB only).
*/
/* enable address translation */
bl enable_addr_trans
sync
/* enable the data cache */
bl dcache_enable
sync
#ifdef CONFIG_SYS_INIT_RAM_LOCK
bl lock_ram_in_cache
sync
#endif
/* set up the stack pointer in our newly created
* cache-ram (r1) */
lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
/* let the C-code set up the rest */
/* */
/* Be careful to keep code relocatable & stack humble */
/*------------------------------------------------------*/
GET_GOT /* initialize GOT access */
/* r3: IMMR */
lis r3, CONFIG_SYS_IMMR@h
/* run low-level CPU init code (in Flash)*/
bl cpu_init_f
/* run 1st part of board init code (in Flash)*/
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
#ifndef CONFIG_NAND_SPL
/*
* Vector Table
*/
.globl _start_of_vectors
_start_of_vectors:
/* Machine check */
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
/* Data Storage exception. */
STD_EXCEPTION(0x300, DataStorage, UnknownException)
/* Instruction Storage exception. */
STD_EXCEPTION(0x400, InstStorage, UnknownException)
/* External Interrupt exception. */
#ifndef FIXME
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
#endif
/* Alignment exception. */
. = 0x600
Alignment:
EXCEPTION_PROLOG(SRR0, SRR1)
mfspr r4,DAR
stw r4,_DAR(r21)
mfspr r5,DSISR
stw r5,_DSISR(r21)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
/* Program check exception */
. = 0x700
ProgramCheck:
EXCEPTION_PROLOG(SRR0, SRR1)
addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
MSR_KERNEL, COPY_EE)
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
/* I guess we could implement decrementer, and may have
* to someday for timekeeping.
*/
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
#ifdef DEBUG
. = 0x1300
/*
* This exception occurs when the program counter matches the
* Instruction Address Breakpoint Register (IABR).
*
* I want the cpu to halt if this occurs so I can hunt around
* with the debugger and look at things.
*
* When DEBUG is defined, both machine check enable (in the MSR)
* and checkstop reset enable (in the reset mode register) are
* turned off and so a checkstop condition will result in the cpu
* halting.
*
* I force the cpu into a checkstop condition by putting an illegal
* instruction here (at least this is the theory).
*
* well - that didnt work, so just do an infinite loop!
*/
1: b 1b
#else
STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
#endif
STD_EXCEPTION(0x1400, SMI, UnknownException)
STD_EXCEPTION(0x1500, Trap_15, UnknownException)
STD_EXCEPTION(0x1600, Trap_16, UnknownException)
STD_EXCEPTION(0x1700, Trap_17, UnknownException)
STD_EXCEPTION(0x1800, Trap_18, UnknownException)
STD_EXCEPTION(0x1900, Trap_19, UnknownException)
STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
STD_EXCEPTION(0x2000, Trap_20, UnknownException)
STD_EXCEPTION(0x2100, Trap_21, UnknownException)
STD_EXCEPTION(0x2200, Trap_22, UnknownException)
STD_EXCEPTION(0x2300, Trap_23, UnknownException)
STD_EXCEPTION(0x2400, Trap_24, UnknownException)
STD_EXCEPTION(0x2500, Trap_25, UnknownException)
STD_EXCEPTION(0x2600, Trap_26, UnknownException)
STD_EXCEPTION(0x2700, Trap_27, UnknownException)
STD_EXCEPTION(0x2800, Trap_28, UnknownException)
STD_EXCEPTION(0x2900, Trap_29, UnknownException)
STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
.globl _end_of_vectors
_end_of_vectors:
. = 0x3000
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception.
* Register r21 is pointer into trap frame, r1 has new stack pointer.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
lis r22,MSR_POW@h
andc r23,r23,r22
stw r23,_MSR(r21)
SAVE_GPR(7, r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
rfi /* jump to handler, enable MMU */
int_return:
mfmsr r28 /* Disable interrupts */
li r4,0
ori r4,r4,MSR_EE
andc r28,r28,r4
SYNC /* Some chip revs need this... */
mtmsr r28
SYNC
lwz r2,_CTR(r1)
lwz r0,_LINK(r1)
mtctr r2
mtlr r0
lwz r2,_XER(r1)
lwz r0,_CCR(r1)
mtspr XER,r2
mtcrf 0xFF,r0
REST_10GPRS(3, r1)
REST_10GPRS(13, r1)
REST_8GPRS(23, r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
mtspr SRR0,r2
mtspr SRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
SYNC
rfi
#endif /* !CONFIG_NAND_SPL */
/*
* This code initialises the E300 processor core
* (conforms to PowerPC 603e spec)
* Note: expects original MSR contents to be in r5.
*/
.globl init_e300_core
init_e300_core: /* time t 10 */
/* Initialize machine status; enable machine check interrupt */
/*-----------------------------------------------------------*/
li r3, MSR_KERNEL /* Set ME and RI flags */
rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
#ifdef DEBUG
rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
#endif
SYNC /* Some chip revs need this... */
mtmsr r3
SYNC
mtspr SRR1, r3 /* Make SRR1 match MSR */
lis r3, CONFIG_SYS_IMMR@h
#if defined(CONFIG_WATCHDOG)
/* Initialise the Watchdog values and reset it (if req) */
/*------------------------------------------------------*/
lis r4, CONFIG_SYS_WATCHDOG_VALUE
ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
stw r4, SWCRR(r3)
/* and reset it */
li r4, 0x556C
sth r4, SWSRR@l(r3)
li r4, -0x55C7
sth r4, SWSRR@l(r3)
#else
/* Disable Watchdog */
/*-------------------*/
lwz r4, SWCRR(r3)
/* Check to see if its enabled for disabling
once disabled by SW you can't re-enable */
andi. r4, r4, 0x4
beq 1f
xor r4, r4, r4
stw r4, SWCRR(r3)
1:
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_MASK_AER_AO)
/* Write the Arbiter Event Enable to mask Address Only traps. */
/* This prevents the dcbz instruction from being trapped when */
/* HID0_ABE Address Broadcast Enable is set and the MEMORY */
/* COHERENCY bit is set in the WIMG bits, which is often */
/* needed for PCI operation. */
lwz r4, 0x0808(r3)
rlwinm r0, r4, 0, ~AER_AO
stw r0, 0x0808(r3)
#endif /* CONFIG_MASK_AER_AO */
/* Initialize the Hardware Implementation-dependent Registers */
/* HID0 also contains cache control */
/* - force invalidation of data and instruction caches */
/*------------------------------------------------------*/
lis r3, CONFIG_SYS_HID0_INIT@h
ori r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
SYNC
mtspr HID0, r3
lis r3, CONFIG_SYS_HID0_FINAL@h
ori r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
SYNC
mtspr HID0, r3
lis r3, CONFIG_SYS_HID2@h
ori r3, r3, CONFIG_SYS_HID2@l
SYNC
mtspr HID2, r3
/* Done! */
/*------------------------------*/
blr
/* setup_bats - set them up to some initial state */
.globl setup_bats
setup_bats:
addis r0, r0, 0x0000
/* IBAT 0 */
addis r4, r0, CONFIG_SYS_IBAT0L@h
ori r4, r4, CONFIG_SYS_IBAT0L@l
addis r3, r0, CONFIG_SYS_IBAT0U@h
ori r3, r3, CONFIG_SYS_IBAT0U@l
mtspr IBAT0L, r4
mtspr IBAT0U, r3
/* DBAT 0 */
addis r4, r0, CONFIG_SYS_DBAT0L@h
ori r4, r4, CONFIG_SYS_DBAT0L@l
addis r3, r0, CONFIG_SYS_DBAT0U@h
ori r3, r3, CONFIG_SYS_DBAT0U@l
mtspr DBAT0L, r4
mtspr DBAT0U, r3
/* IBAT 1 */
addis r4, r0, CONFIG_SYS_IBAT1L@h
ori r4, r4, CONFIG_SYS_IBAT1L@l
addis r3, r0, CONFIG_SYS_IBAT1U@h
ori r3, r3, CONFIG_SYS_IBAT1U@l
mtspr IBAT1L, r4
mtspr IBAT1U, r3
/* DBAT 1 */
addis r4, r0, CONFIG_SYS_DBAT1L@h
ori r4, r4, CONFIG_SYS_DBAT1L@l
addis r3, r0, CONFIG_SYS_DBAT1U@h
ori r3, r3, CONFIG_SYS_DBAT1U@l
mtspr DBAT1L, r4
mtspr DBAT1U, r3
/* IBAT 2 */
addis r4, r0, CONFIG_SYS_IBAT2L@h
ori r4, r4, CONFIG_SYS_IBAT2L@l
addis r3, r0, CONFIG_SYS_IBAT2U@h
ori r3, r3, CONFIG_SYS_IBAT2U@l
mtspr IBAT2L, r4
mtspr IBAT2U, r3
/* DBAT 2 */
addis r4, r0, CONFIG_SYS_DBAT2L@h
ori r4, r4, CONFIG_SYS_DBAT2L@l
addis r3, r0, CONFIG_SYS_DBAT2U@h
ori r3, r3, CONFIG_SYS_DBAT2U@l
mtspr DBAT2L, r4
mtspr DBAT2U, r3
/* IBAT 3 */
addis r4, r0, CONFIG_SYS_IBAT3L@h
ori r4, r4, CONFIG_SYS_IBAT3L@l
addis r3, r0, CONFIG_SYS_IBAT3U@h
ori r3, r3, CONFIG_SYS_IBAT3U@l
mtspr IBAT3L, r4
mtspr IBAT3U, r3
/* DBAT 3 */
addis r4, r0, CONFIG_SYS_DBAT3L@h
ori r4, r4, CONFIG_SYS_DBAT3L@l
addis r3, r0, CONFIG_SYS_DBAT3U@h
ori r3, r3, CONFIG_SYS_DBAT3U@l
mtspr DBAT3L, r4
mtspr DBAT3U, r3
#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CONFIG_SYS_IBAT4L@h
ori r4, r4, CONFIG_SYS_IBAT4L@l
addis r3, r0, CONFIG_SYS_IBAT4U@h
ori r3, r3, CONFIG_SYS_IBAT4U@l
mtspr IBAT4L, r4
mtspr IBAT4U, r3
/* DBAT 4 */
addis r4, r0, CONFIG_SYS_DBAT4L@h
ori r4, r4, CONFIG_SYS_DBAT4L@l
addis r3, r0, CONFIG_SYS_DBAT4U@h
ori r3, r3, CONFIG_SYS_DBAT4U@l
mtspr DBAT4L, r4
mtspr DBAT4U, r3
/* IBAT 5 */
addis r4, r0, CONFIG_SYS_IBAT5L@h
ori r4, r4, CONFIG_SYS_IBAT5L@l
addis r3, r0, CONFIG_SYS_IBAT5U@h
ori r3, r3, CONFIG_SYS_IBAT5U@l
mtspr IBAT5L, r4
mtspr IBAT5U, r3
/* DBAT 5 */
addis r4, r0, CONFIG_SYS_DBAT5L@h
ori r4, r4, CONFIG_SYS_DBAT5L@l
addis r3, r0, CONFIG_SYS_DBAT5U@h
ori r3, r3, CONFIG_SYS_DBAT5U@l
mtspr DBAT5L, r4
mtspr DBAT5U, r3
/* IBAT 6 */
addis r4, r0, CONFIG_SYS_IBAT6L@h
ori r4, r4, CONFIG_SYS_IBAT6L@l
addis r3, r0, CONFIG_SYS_IBAT6U@h
ori r3, r3, CONFIG_SYS_IBAT6U@l
mtspr IBAT6L, r4
mtspr IBAT6U, r3
/* DBAT 6 */
addis r4, r0, CONFIG_SYS_DBAT6L@h
ori r4, r4, CONFIG_SYS_DBAT6L@l
addis r3, r0, CONFIG_SYS_DBAT6U@h
ori r3, r3, CONFIG_SYS_DBAT6U@l
mtspr DBAT6L, r4
mtspr DBAT6U, r3
/* IBAT 7 */
addis r4, r0, CONFIG_SYS_IBAT7L@h
ori r4, r4, CONFIG_SYS_IBAT7L@l
addis r3, r0, CONFIG_SYS_IBAT7U@h
ori r3, r3, CONFIG_SYS_IBAT7U@l
mtspr IBAT7L, r4
mtspr IBAT7U, r3
/* DBAT 7 */
addis r4, r0, CONFIG_SYS_DBAT7L@h
ori r4, r4, CONFIG_SYS_DBAT7L@l
addis r3, r0, CONFIG_SYS_DBAT7U@h
ori r3, r3, CONFIG_SYS_DBAT7U@l
mtspr DBAT7L, r4
mtspr DBAT7U, r3
#endif
isync
/* invalidate all tlb's
*
* From the 603e User Manual: "The 603e provides the ability to
* invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
* instruction invalidates the TLB entry indexed by the EA, and
* operates on both the instruction and data TLBs simultaneously
* invalidating four TLB entries (both sets in each TLB). The
* index corresponds to bits 15-19 of the EA. To invalidate all
* entries within both TLBs, 32 tlbie instructions should be
* issued, incrementing this field by one each time."
*
* "Note that the tlbia instruction is not implemented on the
* 603e."
*
* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
* incrementing by 0x1000 each time. The code below is sort of
* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S
*
*/
lis r3, 0
lis r5, 2
1:
tlbie r3
addi r3, r3, 0x1000
cmp 0, 0, r3, r5
blt 1b
blr
/* Cache functions.
*
* Note: requires that all cache bits in
* HID0 are in the low half word.
*/
#ifndef CONFIG_NAND_SPL
.globl icache_enable
icache_enable:
mfspr r3, HID0
ori r3, r3, HID0_ICE
li r4, HID0_ICFI|HID0_ILOCK
andc r3, r3, r4
ori r4, r3, HID0_ICFI
isync
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
isync
mtspr HID0, r3 /* clears invalidate */
blr
.globl icache_disable
icache_disable:
mfspr r3, HID0
lis r4, 0
ori r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
andc r3, r3, r4
isync
mtspr HID0, r3 /* clears invalidate, enable and lock */
blr
.globl icache_status
icache_status:
mfspr r3, HID0
rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
blr
#endif /* !CONFIG_NAND_SPL */
.globl dcache_enable
dcache_enable:
mfspr r3, HID0
li r5, HID0_DCFI|HID0_DLOCK
andc r3, r3, r5
ori r3, r3, HID0_DCE
sync
mtspr HID0, r3 /* enable, no invalidate */
blr
.globl dcache_disable
dcache_disable:
mflr r4
bl flush_dcache /* uses r3 and r5 */
mfspr r3, HID0
li r5, HID0_DCE|HID0_DLOCK
andc r3, r3, r5
ori r5, r3, HID0_DCFI
sync
mtspr HID0, r5 /* sets invalidate, clears enable and lock */
sync
mtspr HID0, r3 /* clears invalidate */
mtlr r4
blr
.globl dcache_status
dcache_status:
mfspr r3, HID0
rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
blr
.globl flush_dcache
flush_dcache:
lis r3, 0
lis r5, CONFIG_SYS_CACHELINE_SIZE
1: cmp 0, 1, r3, r5
bge 2f
lwz r5, 0(r3)
lis r5, CONFIG_SYS_CACHELINE_SIZE
addi r3, r3, 0x4
b 1b
2: blr
/*-------------------------------------------------------------------*/
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* r3 = dest
* r4 = src
* r5 = length in bytes
* r6 = cachelinesize
*/
.globl relocate_code
relocate_code:
mr r1, r3 /* Set new stack pointer */
mr r9, r4 /* Save copy of Global Data pointer */
mr r10, r5 /* Save copy of Destination Address */
GET_GOT
mr r3, r5 /* Destination Address */
lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__bss_start)
sub r5, r5, r4
li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
/*
* Fix GOT pointer:
*
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
* + Destination Address
*
* Offset:
*/
sub r15, r10, r4
/* First our own GOT */
add r12, r12, r15
/* then the one used by the C code */
add r30, r30, r15
/*
* Now relocate code
*/
cmplw cr1,r3,r4
addi r0,r5,3
srwi. r0,r0,2
beq cr1,4f /* In place copy is not necessary */
beq 7f /* Protect against 0 count */
mtctr r0
bge cr1,2f
la r8,-4(r4)
la r7,-4(r3)
/* copy */
1: lwzu r0,4(r8)
stwu r0,4(r7)
bdnz 1b
addi r0,r5,3
srwi. r0,r0,2
mtctr r0
la r8,-4(r4)
la r7,-4(r3)
/* and compare */
20: lwzu r20,4(r8)
lwzu r21,4(r7)
xor. r22, r20, r21
bne 30f
bdnz 20b
b 4f
/* compare failed */
30: li r3, 0
blr
2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
add r8,r4,r0
add r7,r3,r0
3: lwzu r0,-4(r8)
stwu r0,-4(r7)
bdnz 3b
/*
* Now flush the cache: note that we must start from a cache aligned
* address. Otherwise we might miss one cache line.
*/
4: cmpwi r6,0
add r5,r3,r5
beq 7f /* Always flush prefetch queue in any case */
subi r0,r6,1
andc r3,r3,r0
mr r4,r3
5: dcbst 0,r4
add r4,r4,r6
cmplw r4,r5
blt 5b
sync /* Wait for all dcbst to complete on bus */
mr r4,r3
6: icbi 0,r4
add r4,r4,r6
cmplw r4,r5
blt 6b
7: sync /* Wait for all icbi to complete on bus */
isync
/*
* We are done. Do not return, instead branch to second part of board
* initialization, now running from RAM.
*/
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
mtlr r0
blr
in_ram:
/*
* Relocation Function, r12 point to got2+0x8000
*
* Adjust got2 pointers, no need to check for 0, this code
* already puts a few entries in the table.
*/
li r0,__got2_entries@sectoff@l
la r3,GOT(_GOT2_TABLE_)
lwz r11,GOT(_GOT2_TABLE_)
mtctr r0
sub r11,r3,r11
addi r3,r3,-4
1: lwzu r0,4(r3)
cmpwi r0,0
beq- 2f
add r0,r0,r11
stw r0,0(r3)
2: bdnz 1b
#ifndef CONFIG_NAND_SPL
/*
* Now adjust the fixups and the pointers to the fixups
* in case we need to move ourselves again.
*/
li r0,__fixup_entries@sectoff@l
lwz r3,GOT(_FIXUP_TABLE_)
cmpwi r0,0
mtctr r0
addi r3,r3,-4
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
cmpwi r0,0
add r0,r0,r11
stw r4,0(r3)
beq- 5f
stw r0,0(r4)
5: bdnz 3b
4:
#endif
clear_bss:
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
#if defined(CONFIG_HYMOD)
/*
* For HYMOD - the environment is the very last item in flash.
* The real .bss stops just before environment starts, so only
* clear up to that point.
*
* taken from mods for FADS board
*/
lwz r4,GOT(environment)
#else
lwz r4,GOT(__bss_end__)
#endif
cmplw 0, r3, r4
beq 6f
li r0, 0
5:
stw r0, 0(r3)
addi r3, r3, 4
cmplw 0, r3, r4
bne 5b
6:
mr r3, r9 /* Global Data pointer */
mr r4, r10 /* Destination Address */
bl board_init_r
#ifndef CONFIG_NAND_SPL
/*
* Copy exception vector code to low memory
*
* r3: dest_addr
* r7: source address, r8: end address, r9: target address
*/
.globl trap_init
trap_init:
mflr r4 /* save link register */
GET_GOT
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
1:
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
/*
* relocate `hdlr' and `int_return' entries
*/
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
li r8, Alignment - _start + EXC_OFF_SYS_RESET
2:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
3:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 3b
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
4:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 4b
mfmsr r3 /* now that the vectors have */
lis r7, MSR_IP@h /* relocated into low memory */
ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
andc r3, r3, r7 /* (if it was on) */
SYNC /* Some chip revs need this... */
mtmsr r3
SYNC
mtlr r4 /* restore link register */
blr
#endif /* !CONFIG_NAND_SPL */
#ifdef CONFIG_SYS_INIT_RAM_LOCK
lock_ram_in_cache:
/* Allocate Initial RAM in data cache.
*/
lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
(CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1:
dcbz r0, r3
addi r3, r3, 32
bdnz 1b
/* Lock the data cache */
mfspr r0, HID0
ori r0, r0, HID0_DLOCK
sync
mtspr HID0, r0
sync
blr
#ifndef CONFIG_NAND_SPL
.globl unlock_ram_in_cache
unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
(CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1: icbi r0, r3
dcbi r0, r3
addi r3, r3, 32
bdnz 1b
sync /* Wait for all icbi to complete on bus */
isync
/* Unlock the data cache and invalidate it */
mfspr r3, HID0
li r5, HID0_DLOCK|HID0_DCFI
andc r3, r3, r5 /* no invalidate, unlock */
ori r5, r3, HID0_DCFI /* invalidate, unlock */
sync
mtspr HID0, r5 /* invalidate, unlock */
sync
mtspr HID0, r3 /* no invalidate, unlock */
blr
#endif /* !CONFIG_NAND_SPL */
#endif /* CONFIG_SYS_INIT_RAM_LOCK */
#ifdef CONFIG_SYS_FLASHBOOT
map_flash_by_law1:
/* When booting from ROM (Flash or EPROM), clear the */
/* Address Mask in OR0 so ROM appears everywhere */
/*----------------------------------------------------*/
lis r3, (CONFIG_SYS_IMMR)@h /* r3 <= CONFIG_SYS_IMMR */
lwz r4, OR0@l(r3)
li r5, 0x7fff /* r5 <= 0x00007FFFF */
and r4, r4, r5
stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
* system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
* reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
* from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
* 0xFF800. From the hard resetting to here, the processor fetched and
* executed the instructions one by one. There is not absolutely
* jumping happened. Laterly, the u-boot code has to do an absolutely
* jumping to tell the CPU instruction fetching component what the
* u-boot TEXT base address is. Because the TEXT base resides in the
* boot ROM memory space, to garantee the code can run smoothly after
* that jumping, we must map in the entire boot ROM by Local Access
* Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
* address for boot ROM, such as 0xFE000000. In this case, the default
* LBIU Local Access Widow 0 will not cover this memory space. So, we
* need another window to map in it.
*/
lis r4, (CONFIG_SYS_FLASH_BASE)@h
ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
lis r4, (0x80000012)@h
ori r4, r4, (0x80000012)@l
li r5, CONFIG_SYS_FLASH_SIZE
1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
addi r4, r4, 1
bne 1b
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
/* Wait for HW to catch up */
lwz r4, LBLAWAR1(r3)
twi 0,r4,0
isync
blr
/* Though all the LBIU Local Access Windows and LBC Banks will be
* initialized in the C code, we'd better configure boot ROM's
* window 0 and bank 0 correctly at here.
*/
remap_flash_by_law0:
/* Initialize the BR0 with the boot ROM starting address. */
lwz r4, BR0(r3)
li r5, 0x7FFF
and r4, r4, r5
lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
or r5, r5, r4
stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
lwz r4, OR0(r3)
lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
or r4, r4, r5
stw r4, OR0(r3)
lis r4, (CONFIG_SYS_FLASH_BASE)@h
ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
/* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
lis r4, (0x80000012)@h
ori r4, r4, (0x80000012)@l
li r5, CONFIG_SYS_FLASH_SIZE
1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
addi r4, r4, 1
bne 1b
stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
xor r4, r4, r4
stw r4, LBLAWBAR1(r3)
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
/* Wait for HW to catch up */
lwz r4, LBLAWAR1(r3)
twi 0,r4,0
isync
blr
#endif /* CONFIG_SYS_FLASHBOOT */