u-boot/board/freescale/ls1012aqds
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
..
eth.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
Kconfig board: freescale: ls1012aqds: enable network support on ls1012aqds 2018-03-22 15:05:29 -05:00
ls1012aqds.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1012aqds_pfe.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
ls1012aqds_qixis.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
MAINTAINERS armv8: ls1012a: Add support of ls1012aqds board 2016-06-03 14:12:51 -07:00
Makefile board: freescale: ls1012aqds: enable network support on ls1012aqds 2018-03-22 15:05:29 -05:00
README armv8: ls1012a: Add support of ls1012aqds board 2016-06-03 14:12:51 -07:00

Overview
--------
QorIQ LS1012A Development System (LS1012AQDS) is a high-performance
development platform, with a complete debugging environment.
The LS1012AQDS board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LS1012A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A
SoC overview.

LS1012AQDS board Overview
-----------------------
 - SERDES Connections, 4 lanes supporting:
      - PCI Express - 3.0
      - SGMII, SGMII 2.5
      - SATA 3.0
 - DDR Controller
     - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
 - QSPI Controller
     - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
       signals to QSPI NOR flash memory (2 virtual banks) and the QSPI
       emulator
 - USB 3.0
    - One USB 3.0 controller with integrated PHY
    - One high-speed USB 3.0 port
 - USB 2.0
    - One USB 2.0 controller with ULPI interface
 - Two enhanced secure digital host controllers:
    - SDHC1 controller can be connected to onboard SDHC connector
    - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices
 - 2 I2C controllers
 - One SATA onboard connectors
 - UART
 - 5 SAI
    - One SAI port with audio codec SGTL5000:
	• Provides MIC bias
	• Provides headphone and line output
    - One SAI port terminated at 2x6 header
    - Three SAI Tx/Rx ports terminated at 2x3 headers
 - ARM JTAG support

Booting Options
---------------
a) QSPI Flash Emu Boot
b) QSPI Flash 1
c) QSPI Flash 2

QSPI flash map
--------------
Images		| Size	|QSPI Flash Address
------------------------------------------
RCW + PBI	| 1MB	| 0x4000_0000
U-boot 		| 1MB	| 0x4010_0000
U-boot Env 	| 1MB	| 0x4020_0000
PPA FIT image	| 2MB	| 0x4050_0000
Linux ITB	| ~53MB | 0x40A0_0000