mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
4549e789c1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
176 lines
2.8 KiB
Text
176 lines
2.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
|
/*
|
|
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
|
|
*
|
|
* Copyright (C) 2015, Freescale Semiconductor
|
|
*
|
|
* Mingkai Hu <Mingkai.hu@freescale.com>
|
|
*/
|
|
|
|
/include/ "fsl-ls1043a.dtsi"
|
|
|
|
/ {
|
|
model = "LS1043A QDS Board";
|
|
aliases {
|
|
spi0 = &qspi;
|
|
spi1 = &dspi0;
|
|
};
|
|
};
|
|
|
|
&dspi0 {
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
dflash0: n25q128a {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-flash";
|
|
spi-max-frequency = <1000000>; /* input clock */
|
|
spi-cpol;
|
|
spi-cpha;
|
|
reg = <0>;
|
|
};
|
|
|
|
dflash1: sst25wf040b {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-flash";
|
|
spi-max-frequency = <3500000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
reg = <1>;
|
|
};
|
|
|
|
dflash2: en25s64 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-flash";
|
|
spi-max-frequency = <3500000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
qflash0: s25fl128s@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spi-flash";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pca9547@77 {
|
|
compatible = "philips,pca9547";
|
|
reg = <0x77>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds3232";
|
|
reg = <0x68>;
|
|
/* IRQ10_B */
|
|
interrupts = <0 150 0x4>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2>;
|
|
|
|
ina220@40 {
|
|
compatible = "ti,ina220";
|
|
reg = <0x40>;
|
|
shunt-resistor = <1000>;
|
|
};
|
|
|
|
ina220@41 {
|
|
compatible = "ti,ina220";
|
|
reg = <0x41>;
|
|
shunt-resistor = <1000>;
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3>;
|
|
|
|
eeprom@56 {
|
|
compatible = "at24,24c512";
|
|
reg = <0x56>;
|
|
};
|
|
|
|
eeprom@57 {
|
|
compatible = "at24,24c512";
|
|
reg = <0x57>;
|
|
};
|
|
|
|
adt7461a@4c {
|
|
compatible = "adt7461a";
|
|
reg = <0x4c>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ifc {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
/* NOR, NAND Flashes and FPGA on board */
|
|
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
|
|
0x1 0x0 0x0 0x7e800000 0x00010000
|
|
0x2 0x0 0x0 0x7fb00000 0x00000100>;
|
|
status = "okay";
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x8000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@1,0 {
|
|
compatible = "fsl,ifc-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x1 0x0 0x10000>;
|
|
};
|
|
|
|
fpga: board-control@2,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
reg = <0x2 0x0 0x0000100>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
ranges = <0 2 0 0x100>;
|
|
};
|
|
};
|
|
|
|
&duart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&duart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&lpuart0 {
|
|
status = "okay";
|
|
};
|