mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
90 lines
2.3 KiB
C
90 lines
2.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* hardware_am43xx.h
|
|
*
|
|
* AM43xx hardware specific header
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#ifndef __AM43XX_HARDWARE_AM43XX_H
|
|
#define __AM43XX_HARDWARE_AM43XX_H
|
|
|
|
/* Module base addresses */
|
|
|
|
/* L3 Fast Configuration Bandwidth Limiter Base Address */
|
|
#define L3F_CFG_BWLIMITER 0x44005200
|
|
|
|
/* UART Base Address */
|
|
#define UART0_BASE 0x44E09000
|
|
|
|
/* GPIO Base address */
|
|
#define GPIO2_BASE 0x481AC000
|
|
|
|
/* Watchdog Timer */
|
|
#define WDT_BASE 0x44E35000
|
|
|
|
/* Control Module Base Address */
|
|
#define CTRL_BASE 0x44E10000
|
|
#define CTRL_DEVICE_BASE 0x44E10600
|
|
|
|
/* PRCM Base Address */
|
|
#define PRCM_BASE 0x44DF0000
|
|
#define CM_WKUP 0x44DF2800
|
|
#define CM_PER 0x44DF8800
|
|
#define CM_DPLL 0x44DF4200
|
|
#define CM_RTC 0x44DF8500
|
|
|
|
#define PRM_RSTCTRL (PRCM_BASE + 0x4000)
|
|
#define PRM_RSTST (PRM_RSTCTRL + 4)
|
|
|
|
/* VTP Base address */
|
|
#define VTP0_CTRL_ADDR 0x44E10E0C
|
|
#define VTP1_CTRL_ADDR 0x48140E10
|
|
|
|
/* USB CTRL Base Address */
|
|
#define USB1_CTRL 0x44e10628
|
|
#define USB1_CTRL_CM_PWRDN BIT(0)
|
|
#define USB1_CTRL_OTG_PWRDN BIT(1)
|
|
|
|
/* DDR Base address */
|
|
#define DDR_PHY_CMD_ADDR 0x44E12000
|
|
#define DDR_PHY_DATA_ADDR 0x44E120C8
|
|
#define DDR_PHY_CMD_ADDR2 0x47C0C800
|
|
#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
|
|
#define DDR_DATA_REGS_NR 2
|
|
|
|
/* CPSW Config space */
|
|
#define CPSW_MDIO_BASE 0x4A101000
|
|
|
|
/* RTC base address */
|
|
#define RTC_BASE 0x44E3E000
|
|
|
|
/* USB OTG */
|
|
#define USB_OTG_SS1_BASE 0x48390000
|
|
#define USB_OTG_SS1_GLUE_BASE 0x48380000
|
|
#define USB2_PHY1_POWER 0x44E10620
|
|
|
|
#define USB_OTG_SS2_BASE 0x483D0000
|
|
#define USB_OTG_SS2_GLUE_BASE 0x483C0000
|
|
#define USB2_PHY2_POWER 0x44E10628
|
|
|
|
/* USB Clock Control */
|
|
#define PRM_PER_USB_OTG_SS0_CLKCTRL (CM_PER + 0x260)
|
|
#define PRM_PER_USB_OTG_SS1_CLKCTRL (CM_PER + 0x268)
|
|
#define USBOTGSSX_CLKCTRL_MODULE_EN (1 << 1)
|
|
#define USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960 (1 << 8)
|
|
|
|
#define PRM_PER_USBPHYOCP2SCP0_CLKCTRL (CM_PER + 0x5b8)
|
|
#define PRM_PER_USBPHYOCP2SCP1_CLKCTRL (CM_PER + 0x5c0)
|
|
#define USBPHYOCPSCP_MODULE_EN (1 << 1)
|
|
#define CM_DEVICE_INST 0x44df4100
|
|
#define PRM_DEVICE_INST 0x44df4000
|
|
|
|
#define USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960 (1 << 8)
|
|
#define USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K (1 << 8)
|
|
|
|
/* EDMA3 Base Address */
|
|
#define EDMA3_BASE 0x49000000
|
|
|
|
#endif /* __AM43XX_HARDWARE_AM43XX_H */
|