mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
92ca2fee08
This patch adds the glue layer for the MIPS Octeon SoCs. It's ported mainly from the Linux code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
393 lines
11 KiB
C
393 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Octeon family DWC3 specific glue layer
|
|
*
|
|
* Copyright (C) 2020 Stefan Roese <sr@denx.de>
|
|
*
|
|
* The low-level init code is based on the Linux driver octeon-usb.c by
|
|
* David Daney <david.daney@cavium.com>, which is:
|
|
* Copyright (C) 2010-2017 Cavium Networks
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/of_access.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/usb/dwc3.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <mach/octeon-model.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CVMX_GPIO_BIT_CFGX(i) (0x0001070000000900ull + ((i) * 8))
|
|
#define CVMX_GPIO_XBIT_CFGX(i) (0x0001070000000900ull + \
|
|
((i) & 31) * 8 - 8 * 16)
|
|
|
|
#define GPIO_BIT_CFG_TX_OE BIT_ULL(0)
|
|
#define GPIO_BIT_CFG_OUTPUT_SEL GENMASK_ULL(20, 16)
|
|
|
|
#define UCTL_CTL_UCTL_RST BIT_ULL(0)
|
|
#define UCTL_CTL_UAHC_RST BIT_ULL(1)
|
|
#define UCTL_CTL_UPHY_RST BIT_ULL(2)
|
|
#define UCTL_CTL_DRD_MODE BIT_ULL(3)
|
|
#define UCTL_CTL_SCLK_EN BIT_ULL(4)
|
|
#define UCTL_CTL_HS_POWER_EN BIT_ULL(12)
|
|
#define UCTL_CTL_SS_POWER_EN BIT_ULL(14)
|
|
#define UCTL_CTL_H_CLKDIV_SEL GENMASK_ULL(26, 24)
|
|
#define UCTL_CTL_H_CLKDIV_RST BIT_ULL(28)
|
|
#define UCTL_CTL_H_CLK_EN BIT_ULL(30)
|
|
#define UCTL_CTL_REF_CLK_FSEL GENMASK_ULL(37, 32)
|
|
#define UCTL_CTL_REF_CLK_DIV2 BIT_ULL(38)
|
|
#define UCTL_CTL_REF_SSP_EN BIT_ULL(39)
|
|
#define UCTL_CTL_MPLL_MULTIPLIER GENMASK_ULL(46, 40)
|
|
#define UCTL_CTL_SSC_EN BIT_ULL(59)
|
|
#define UCTL_CTL_REF_CLK_SEL GENMASK_ULL(61, 60)
|
|
|
|
#define UCTL_HOST_CFG 0xe0
|
|
#define UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN BIT_ULL(24)
|
|
#define UCTL_HOST_CFG_PPC_EN BIT_ULL(25)
|
|
|
|
#define UCTL_SHIM_CFG 0xe8
|
|
#define UCTL_SHIM_CFG_CSR_ENDIAN_MODE GENMASK_ULL(1, 0)
|
|
#define UCTL_SHIM_CFG_DMA_ENDIAN_MODE GENMASK_ULL(9, 8)
|
|
|
|
#define OCTEON_H_CLKDIV_SEL 8
|
|
#define OCTEON_MIN_H_CLK_RATE 150000000
|
|
#define OCTEON_MAX_H_CLK_RATE 300000000
|
|
|
|
#define CLOCK_50MHZ 50000000
|
|
#define CLOCK_100MHZ 100000000
|
|
#define CLOCK_125MHZ 125000000
|
|
|
|
static u8 clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
|
|
|
|
static int dwc3_octeon_config_power(struct udevice *dev, void __iomem *base)
|
|
{
|
|
u64 uctl_host_cfg;
|
|
u64 gpio_bit;
|
|
u32 gpio_pwr[3];
|
|
int gpio, len, power_active_low;
|
|
const struct device_node *node = dev_np(dev);
|
|
int index = ((u64)base >> 24) & 1;
|
|
void __iomem *gpio_bit_cfg;
|
|
|
|
if (of_find_property(node, "power", &len)) {
|
|
if (len == 12) {
|
|
dev_read_u32_array(dev, "power", gpio_pwr, 3);
|
|
power_active_low = gpio_pwr[2] & 0x01;
|
|
gpio = gpio_pwr[1];
|
|
} else if (len == 8) {
|
|
dev_read_u32_array(dev, "power", gpio_pwr, 2);
|
|
power_active_low = 0;
|
|
gpio = gpio_pwr[1];
|
|
} else {
|
|
printf("dwc3 controller clock init failure\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_bit_cfg = ioremap(CVMX_GPIO_BIT_CFGX(gpio), 0);
|
|
|
|
if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
|
|
OCTEON_IS_MODEL(OCTEON_CNF75XX)) && gpio <= 31) {
|
|
gpio_bit = ioread64(gpio_bit_cfg);
|
|
gpio_bit |= GPIO_BIT_CFG_TX_OE;
|
|
gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
|
|
gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
|
|
index == 0 ? 0x14 : 0x15);
|
|
iowrite64(gpio_bit, gpio_bit_cfg);
|
|
} else if (gpio <= 15) {
|
|
gpio_bit = ioread64(gpio_bit_cfg);
|
|
gpio_bit |= GPIO_BIT_CFG_TX_OE;
|
|
gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
|
|
gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
|
|
index == 0 ? 0x14 : 0x19);
|
|
iowrite64(gpio_bit, gpio_bit_cfg);
|
|
} else {
|
|
gpio_bit_cfg = ioremap(CVMX_GPIO_XBIT_CFGX(gpio), 0);
|
|
|
|
gpio_bit = ioread64(gpio_bit_cfg);
|
|
gpio_bit |= GPIO_BIT_CFG_TX_OE;
|
|
gpio_bit &= ~GPIO_BIT_CFG_OUTPUT_SEL;
|
|
gpio_bit |= FIELD_PREP(GPIO_BIT_CFG_OUTPUT_SEL,
|
|
index == 0 ? 0x14 : 0x19);
|
|
iowrite64(gpio_bit, gpio_bit_cfg);
|
|
}
|
|
|
|
/* Enable XHCI power control and set if active high or low. */
|
|
uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
|
|
uctl_host_cfg |= UCTL_HOST_CFG_PPC_EN;
|
|
if (power_active_low)
|
|
uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
|
|
else
|
|
uctl_host_cfg |= UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
|
|
iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
|
|
|
|
/* Wait for power to stabilize */
|
|
mdelay(10);
|
|
} else {
|
|
/* Disable XHCI power control and set if active high. */
|
|
uctl_host_cfg = ioread64(base + UCTL_HOST_CFG);
|
|
uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_EN;
|
|
uctl_host_cfg &= ~UCTL_HOST_CFG_PPC_ACTIVE_HIGH_EN;
|
|
iowrite64(uctl_host_cfg, base + UCTL_HOST_CFG);
|
|
dev_warn(dev, "dwc3 controller clock init failure.\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_octeon_clocks_start(struct udevice *dev, void __iomem *base)
|
|
{
|
|
u64 uctl_ctl;
|
|
int ref_clk_sel = 2;
|
|
u64 div;
|
|
u32 clock_rate;
|
|
int mpll_mul;
|
|
int i;
|
|
u64 h_clk_rate;
|
|
void __iomem *uctl_ctl_reg = base;
|
|
const char *ss_clock_type;
|
|
const char *hs_clock_type;
|
|
|
|
i = dev_read_u32(dev, "refclk-frequency", &clock_rate);
|
|
if (i) {
|
|
printf("No UCTL \"refclk-frequency\"\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ss_clock_type = dev_read_string(dev, "refclk-type-ss");
|
|
if (!ss_clock_type) {
|
|
printf("No UCTL \"refclk-type-ss\"\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
hs_clock_type = dev_read_string(dev, "refclk-type-hs");
|
|
if (!hs_clock_type) {
|
|
printf("No UCTL \"refclk-type-hs\"\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
|
|
if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0) {
|
|
ref_clk_sel = 0;
|
|
} else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
|
|
ref_clk_sel = 2;
|
|
} else {
|
|
printf("Invalid HS clock type %s, using pll_ref_clk\n",
|
|
hs_clock_type);
|
|
}
|
|
} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
|
|
if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0) {
|
|
ref_clk_sel = 1;
|
|
} else if (strcmp(hs_clock_type, "pll_ref_clk") == 0) {
|
|
ref_clk_sel = 3;
|
|
} else {
|
|
printf("Invalid HS clock type %s, using pll_ref_clk\n",
|
|
hs_clock_type);
|
|
ref_clk_sel = 3;
|
|
}
|
|
} else {
|
|
printf("Invalid SS clock type %s, using dlmc_ref_clk0\n",
|
|
ss_clock_type);
|
|
}
|
|
|
|
if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
|
|
clock_rate != CLOCK_100MHZ)
|
|
printf("Invalid UCTL clock rate of %u\n", clock_rate);
|
|
|
|
/*
|
|
* Step 1: Wait for all voltages to be stable...that surely
|
|
* happened before this driver is started. SKIP
|
|
*/
|
|
|
|
/* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
|
|
|
|
/* Step 3: Assert all resets. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl |= UCTL_CTL_UCTL_RST | UCTL_CTL_UAHC_RST | UCTL_CTL_UPHY_RST;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 4a: Reset the clock dividers. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl |= UCTL_CTL_H_CLKDIV_RST;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 4b: Select controller clock frequency. */
|
|
for (div = ARRAY_SIZE(clk_div) - 1; div >= 0; div--) {
|
|
h_clk_rate = gd->bus_clk / clk_div[div];
|
|
if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
|
|
h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
|
|
break;
|
|
}
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_H_CLKDIV_SEL;
|
|
uctl_ctl |= FIELD_PREP(UCTL_CTL_H_CLKDIV_SEL, div);
|
|
uctl_ctl |= UCTL_CTL_H_CLK_EN;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
if (div != FIELD_GET(UCTL_CTL_H_CLKDIV_SEL, uctl_ctl) ||
|
|
!(uctl_ctl & UCTL_CTL_H_CLK_EN)) {
|
|
printf("dwc3 controller clock init failure\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Step 4c: Deassert the controller clock divider reset. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_H_CLKDIV_RST;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 5a: Reference clock configuration. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_REF_CLK_SEL;
|
|
uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_SEL, ref_clk_sel);
|
|
uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
|
|
uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x07);
|
|
uctl_ctl &= ~UCTL_CTL_REF_CLK_DIV2;
|
|
|
|
switch (clock_rate) {
|
|
default:
|
|
printf("Invalid ref_clk %u, using %u instead\n", CLOCK_100MHZ,
|
|
clock_rate);
|
|
fallthrough;
|
|
case CLOCK_100MHZ:
|
|
mpll_mul = 0x19;
|
|
if (ref_clk_sel < 2) {
|
|
uctl_ctl &= ~UCTL_CTL_REF_CLK_FSEL;
|
|
uctl_ctl |= FIELD_PREP(UCTL_CTL_REF_CLK_FSEL, 0x27);
|
|
}
|
|
break;
|
|
case CLOCK_50MHZ:
|
|
mpll_mul = 0x32;
|
|
break;
|
|
case CLOCK_125MHZ:
|
|
mpll_mul = 0x28;
|
|
break;
|
|
}
|
|
uctl_ctl &= ~UCTL_CTL_MPLL_MULTIPLIER;
|
|
uctl_ctl |= FIELD_PREP(UCTL_CTL_MPLL_MULTIPLIER, mpll_mul);
|
|
|
|
/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
|
|
uctl_ctl |= UCTL_CTL_SSC_EN;
|
|
|
|
/* Step 5c: Enable SuperSpeed. */
|
|
uctl_ctl |= UCTL_CTL_REF_SSP_EN;
|
|
|
|
/* Step 5d: Configure PHYs. SKIP */
|
|
|
|
/* Step 6a & 6b: Power up PHYs. */
|
|
uctl_ctl |= UCTL_CTL_HS_POWER_EN;
|
|
uctl_ctl |= UCTL_CTL_SS_POWER_EN;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 7: Wait 10 controller-clock cycles to take effect. */
|
|
udelay(10);
|
|
|
|
/* Step 8a: Deassert UCTL reset signal. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_UCTL_RST;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 8b: Wait 10 controller-clock cycles. */
|
|
udelay(10);
|
|
|
|
/* Step 8c: Setup power-power control. */
|
|
if (dwc3_octeon_config_power(dev, base)) {
|
|
printf("Error configuring power\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Step 8d: Deassert UAHC reset signal. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_UAHC_RST;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 8e: Wait 10 controller-clock cycles. */
|
|
udelay(10);
|
|
|
|
/* Step 9: Enable conditional coprocessor clock of UCTL. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl |= UCTL_CTL_SCLK_EN;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
/* Step 10: Set for host mode only. */
|
|
uctl_ctl = ioread64(uctl_ctl_reg);
|
|
uctl_ctl &= ~UCTL_CTL_DRD_MODE;
|
|
iowrite64(uctl_ctl, uctl_ctl_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dwc3_octeon_set_endian_mode(void __iomem *base)
|
|
{
|
|
u64 shim_cfg;
|
|
|
|
shim_cfg = ioread64(base + UCTL_SHIM_CFG);
|
|
shim_cfg &= ~UCTL_SHIM_CFG_CSR_ENDIAN_MODE;
|
|
shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_CSR_ENDIAN_MODE, 1);
|
|
shim_cfg &= ~UCTL_SHIM_CFG_DMA_ENDIAN_MODE;
|
|
shim_cfg |= FIELD_PREP(UCTL_SHIM_CFG_DMA_ENDIAN_MODE, 1);
|
|
iowrite64(shim_cfg, base + UCTL_SHIM_CFG);
|
|
}
|
|
|
|
static void dwc3_octeon_phy_reset(void __iomem *base)
|
|
{
|
|
u64 uctl_ctl;
|
|
|
|
uctl_ctl = ioread64(base);
|
|
uctl_ctl &= ~UCTL_CTL_UPHY_RST;
|
|
iowrite64(uctl_ctl, base);
|
|
}
|
|
|
|
static int octeon_dwc3_glue_probe(struct udevice *dev)
|
|
{
|
|
void __iomem *base;
|
|
|
|
base = dev_remap_addr(dev);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
dwc3_octeon_clocks_start(dev, base);
|
|
dwc3_octeon_set_endian_mode(base);
|
|
dwc3_octeon_phy_reset(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int octeon_dwc3_glue_bind(struct udevice *dev)
|
|
{
|
|
ofnode node, dwc3_node;
|
|
|
|
/* Find snps,dwc3 node from subnode */
|
|
dwc3_node = ofnode_null();
|
|
ofnode_for_each_subnode(node, dev->node) {
|
|
if (ofnode_device_is_compatible(node, "snps,dwc3"))
|
|
dwc3_node = node;
|
|
}
|
|
|
|
if (!ofnode_valid(dwc3_node)) {
|
|
printf("Can't find dwc3 subnode for %s\n", dev->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return dm_scan_fdt_dev(dev);
|
|
}
|
|
|
|
static const struct udevice_id octeon_dwc3_glue_ids[] = {
|
|
{ .compatible = "cavium,octeon-7130-usb-uctl" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dwc3_octeon_glue) = {
|
|
.name = "dwc3_octeon_glue",
|
|
.id = UCLASS_NOP,
|
|
.of_match = octeon_dwc3_glue_ids,
|
|
.probe = octeon_dwc3_glue_probe,
|
|
.bind = octeon_dwc3_glue_bind,
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|