u-boot/nand_spl/nand_boot_fsl_nfc.c
Magnus Lilja 40c642bc19 MX31: Add NAND SPL for i.MX31.
This patch adds the NAND SPL framework needed to boot i.MX31 boards
from NAND.

It has been tested on a i.MX31 PDK board with large page NAND. Small
page NANDs should work as well, but this has not been tested.

Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
whether this is compatible with a particular setup depends on how
the NAND device is programmed by the flash programmer (e.g. JTAG
debugger).

The patch is based on the work by Maxim Artamonov.

Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-06-21 16:18:12 +02:00

259 lines
6.1 KiB
C

/*
* (C) Copyright 2009
* Magnus Lilja <lilja.magnus@gmail.com>
*
* (C) Copyright 2008
* Maxim Artamonov, <scn1874 at yandex.ru>
*
* (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr at denx.de.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nand.h>
#include <asm-arm/arch/mx31-regs.h>
#include <asm/io.h>
#include <fsl_nfc.h>
static struct fsl_nfc_regs *nfc;
static void nfc_wait_ready(void)
{
uint32_t tmp;
while (!(readw(&nfc->nand_flash_config2) & NFC_INT))
;
/* Reset interrupt flag */
tmp = readw(&nfc->nand_flash_config2);
tmp &= ~NFC_INT;
writew(tmp, &nfc->nand_flash_config2);
}
static void nfc_nand_init(void)
{
/* unlocking RAM Buff */
writew(0x2, &nfc->configuration);
/* hardware ECC checking and correct */
writew(NFC_ECC_EN, &nfc->nand_flash_config1);
}
static void nfc_nand_command(unsigned short command)
{
writew(command, &nfc->flash_cmd);
writew(NFC_CMD, &nfc->nand_flash_config2);
nfc_wait_ready();
}
static void nfc_nand_page_address(unsigned int page_address)
{
unsigned int page_count;
writew(0x00, &nfc->flash_cmd);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
/* code only for 2kb flash */
if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
}
page_count = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
if (page_address <= page_count) {
page_count--; /* transform 0x01000000 to 0x00ffffff */
do {
writew(page_address & 0xff, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
page_address = page_address >> 8;
page_count = page_count >> 8;
} while (page_count);
}
}
static void nfc_nand_data_output(void)
{
int i;
/*
* The NAND controller requires four output commands for
* large page devices.
*/
for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
writew(NFC_ECC_EN, &nfc->nand_flash_config1);
writew(i, &nfc->buffer_address); /* read in i:th buffer */
writew(NFC_OUTPUT, &nfc->nand_flash_config2);
nfc_wait_ready();
}
}
static int nfc_nand_check_ecc(void)
{
return readw(&nfc->ecc_status_result);
}
static int nfc_read_page(unsigned int page_address, unsigned char *buf)
{
int i;
u32 *src;
u32 *dst;
writew(0, &nfc->buffer_address); /* read in first 0 buffer */
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page_address);
if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
if (nfc_nand_check_ecc())
return -1;
src = &nfc->main_area0[0];
dst = (u32 *)buf;
/* main copy loop from NAND-buffer to SDRAM memory */
for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 4); i++) {
writel(readl(src), dst);
src++;
dst++;
}
return 0;
}
static int is_badblock(int pagenumber)
{
int page = pagenumber;
u32 badblock;
u32 *src;
/* Check the first two pages for bad block markers */
for (page = pagenumber; page < pagenumber + 2; page++) {
writew(0, &nfc->buffer_address); /* read in first 0 buffer */
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page);
if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
src = &nfc->spare_area0[0];
/*
* IMPORTANT NOTE: The nand flash controller uses a non-
* standard layout for large page devices. This can
* affect the position of the bad block marker.
*/
/* Get the bad block marker */
badblock = readl(&src[CONFIG_SYS_NAND_BAD_BLOCK_POS / 4]);
badblock >>= 8 * (CONFIG_SYS_NAND_BAD_BLOCK_POS % 4);
badblock &= 0xff;
/* bad block marker verify */
if (badblock != 0xff)
return 1; /* potential bad block */
}
return 0;
}
static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
{
int i;
unsigned int page;
unsigned int maxpages = CONFIG_SYS_NAND_SIZE /
CONFIG_SYS_NAND_PAGE_SIZE;
nfc = (void *)NFC_BASE_ADDR;
nfc_nand_init();
/* Convert to page number */
page = from / CONFIG_SYS_NAND_PAGE_SIZE;
i = 0;
while (i < (size / CONFIG_SYS_NAND_PAGE_SIZE)) {
if (nfc_read_page(page, buf) < 0)
return -1;
page++;
i++;
buf = buf + CONFIG_SYS_NAND_PAGE_SIZE;
/*
* Check if we have crossed a block boundary, and if so
* check for bad block.
*/
if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
/*
* Yes, new block. See if this block is good. If not,
* loop until we find i good block.
*/
while (is_badblock(page)) {
page = page + CONFIG_SYS_NAND_PAGE_COUNT;
/* Check i we've reached the end of flash. */
if (page >= maxpages)
return -1;
}
}
}
return 0;
}
/*
* The main entry for NAND booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from NAND into SDRAM and starts it from there.
*/
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
nfc = (void *)NFC_BASE_ADDR;
/*
* CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
* be aligned to full pages
*/
if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
/* Copy from NAND successful, start U-boot */
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
} else {
/* Unrecoverable error when copying from NAND */
hang();
}
}
/*
* Called in case of an exception.
*/
void hang(void)
{
/* Loop forever */
while (1) ;
}