u-boot/arch/arm/cpu/armv7/ls102xa/cpu.c
Wang Huan d60a2099a2 arm: ls102xa: Add Freescale LS102xA SoC support
The QorIQ LS1 family is built on Layerscape architecture,
the industry's first software-aware, core-agnostic networking
architecture to offer unprecedented efficiency and scale.

Freescale LS102xA is a set of SoCs combines two ARM
Cortex-A7 cores that have been optimized for high
reliability and pack the highest level of integration
available for sub-3 W embedded communications processors
with Layerscape architecture and with a comprehensive
enablement model focused on ease of programmability.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Jason Jin <jason.jin@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2014-09-08 10:30:32 -07:00

103 lines
1.9 KiB
C

/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
char buf1[32], buf2[32];
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr, major, minor, ver, i;
svr = in_be32(&gur->svr);
major = SVR_MAJ(svr);
minor = SVR_MIN(svr);
puts("CPU: Freescale LayerScape ");
ver = SVR_SOC_VER(svr);
switch (ver) {
case SOC_VER_SLS1020:
puts("SLS1020");
break;
case SOC_VER_LS1020:
puts("LS1020");
break;
case SOC_VER_LS1021:
puts("LS1021");
break;
case SOC_VER_LS1022:
puts("LS1022");
break;
default:
puts("Unknown");
break;
}
if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020))
puts("E");
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
puts("Clock Configuration:");
printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk));
printf("\n Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk));
printf("DDR:%-4s MHz (%s MT/s data rate), ",
strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk));
puts("\n");
/* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
*/
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
u32 rcw = in_be32(&gur->rcwsr[i]);
if ((i % 4) == 0)
printf("\n %08x:", i * 4);
printf(" %08x", rcw);
}
puts("\n");
return 0;
}
#endif
void enable_caches(void)
{
#ifndef CONFIG_SYS_ICACHE_OFF
icache_enable();
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
dcache_enable();
#endif
}
#ifdef CONFIG_FSL_ESDHC
int cpu_mmc_init(bd_t *bis)
{
return fsl_esdhc_mmc_init(bis);
}
#endif
int cpu_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
tsec_standard_init(bis);
#endif
return 0;
}