u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00

History

Christian Gmeiner cb0b6986b0 ot1200: fix card detect for usdhc4 Today I got the final board and found out that a different connector is used as the one on my development board. The new connector has swaped pins for cd and wp. This change is tested on a production ready board. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>		2014-11-13 16:23:38 +01:00
..
Kconfig	kconfig: arm: introduce symbol for ARM CPUs	2014-10-29 09:02:09 -04:00
MAINTAINERS	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00
Makefile	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00
mx6q_4x_mt41j128.cfg	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00
ot1200.c	ot1200: fix card detect for usdhc4	2014-11-13 16:23:38 +01:00
README	imx6: add Bachmann OT1200 board	2014-10-06 17:24:28 +02:00

README

U-Boot for the Bachmann electronic GmbH OT1200 devices

There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.

- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.

- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.


The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).

In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.