Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 01:50:25 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/x86/dts/dfi-bt700.dtsi
Stefan Roese 1f4e25780a x86: dfi-bt700: Add xHCI USB support 
Change from EHCI to xHCI on the DFI BayTrail SoM.

The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For
correct operation, it needs to get reset upon power-up. Otherwise it
may happen that the hub is not detected after a software reboot. This
patch also configures this GPIO in the dts for correct operation.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30 10:30:25 +08:00

327 lines
7.5 KiB
Text
Raw Blame History

/*
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
#include "skeleton.dtsi"
#include "rtc.dtsi"
#include "tsc_timer.dtsi"
/ {
config {
silent_console = <0>;
};
pch_pinctrl {
compatible = "intel,x86-pinctrl";
reg = <0 0>;
/* Add UART1 PAD configuration (SIO HS-UART) */
uart1_txd@0 {
pad-offset = <0x10>;
mode-func = <1>;
};
uart1_rxd@0 {
pad-offset = <0x20>;
mode-func = <1>;
};
/*
* As of today, the latest version FSP (gold4) for BayTrail
* misses the PAD configuration of the SD controller's Card
* Detect signal. The default PAD value for the CD pin sets
* the pin to work in GPIO mode, which causes card detect
* status cannot be reflected by the Present State register
* in the SD controller (bit 16 & bit 18 are always zero).
*
* Configure this pin to function 1 (SD controller).
*/
sdmmc3_cd@0 {
pad-offset = <0x3a0>;
mode-func = <1>;
};
xhci_hub_reset: usb_ulpi_stp@0 {
gpio-offset = <0xa0 10>;
pad-offset = <0x23b0>;
mode-func = <0>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
};
chosen {
stdout-path = "/serial";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <0>;
intel,apic-id = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <1>;
intel,apic-id = <2>;
};
cpu@2 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <2>;
intel,apic-id = <4>;
};
cpu@3 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <3>;
intel,apic-id = <6>;
};
};
pci {
compatible = "intel,pci-baytrail", "pci-x86";
#address-cells = <3>;
#size-cells = <2>;
u-boot,dm-pre-reloc;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
pciuart0: uart@1e,3 {
compatible = "pci8086,0f0a.00",
"pci8086,0f0a",
"pciclass,070002",
"pciclass,0700",
"ns16550";
u-boot,dm-pre-reloc;
reg = <0x0200f310 0x0 0x0 0x0 0x0>;
reg-shift = <2>;
clock-frequency = <58982400>;
current-speed = <115200>;
};
pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "pci8086,0f1c", "intel,pch9";
#address-cells = <1>;
#size-cells = <1>;
irq-router {
compatible = "intel,irq-router";
intel,pirq-config = "ibase";
intel,ibase-offset = <0x50>;
intel,actl-addr = <0>;
intel,pirq-link = <8 8>;
intel,pirq-mask = <0xdee0>;
intel,pirq-routing = <
/* BayTrail PCI devices */
PCI_BDF(0, 2, 0) INTA PIRQA
PCI_BDF(0, 3, 0) INTA PIRQA
PCI_BDF(0, 16, 0) INTA PIRQA
PCI_BDF(0, 17, 0) INTA PIRQA
PCI_BDF(0, 18, 0) INTA PIRQA
PCI_BDF(0, 19, 0) INTA PIRQA
PCI_BDF(0, 20, 0) INTA PIRQA
PCI_BDF(0, 21, 0) INTA PIRQA
PCI_BDF(0, 22, 0) INTA PIRQA
PCI_BDF(0, 23, 0) INTA PIRQA
PCI_BDF(0, 24, 0) INTA PIRQA
PCI_BDF(0, 24, 1) INTC PIRQC
PCI_BDF(0, 24, 2) INTD PIRQD
PCI_BDF(0, 24, 3) INTB PIRQB
PCI_BDF(0, 24, 4) INTA PIRQA
PCI_BDF(0, 24, 5) INTC PIRQC
PCI_BDF(0, 24, 6) INTD PIRQD
PCI_BDF(0, 24, 7) INTB PIRQB
PCI_BDF(0, 26, 0) INTA PIRQA
PCI_BDF(0, 27, 0) INTA PIRQA
PCI_BDF(0, 28, 0) INTA PIRQA
PCI_BDF(0, 28, 1) INTB PIRQB
PCI_BDF(0, 28, 2) INTC PIRQC
PCI_BDF(0, 28, 3) INTD PIRQD
PCI_BDF(0, 29, 0) INTA PIRQA
PCI_BDF(0, 30, 0) INTA PIRQA
PCI_BDF(0, 30, 1) INTD PIRQD
PCI_BDF(0, 30, 2) INTB PIRQB
PCI_BDF(0, 30, 3) INTC PIRQC
PCI_BDF(0, 30, 4) INTD PIRQD
PCI_BDF(0, 30, 5) INTB PIRQB
PCI_BDF(0, 31, 3) INTB PIRQB
/*
* PCIe root ports downstream
* interrupts
*/
PCI_BDF(1, 0, 0) INTA PIRQA
PCI_BDF(1, 0, 0) INTB PIRQB
PCI_BDF(1, 0, 0) INTC PIRQC
PCI_BDF(1, 0, 0) INTD PIRQD
PCI_BDF(2, 0, 0) INTA PIRQB
PCI_BDF(2, 0, 0) INTB PIRQC
PCI_BDF(2, 0, 0) INTC PIRQD
PCI_BDF(2, 0, 0) INTD PIRQA
PCI_BDF(3, 0, 0) INTA PIRQC
PCI_BDF(3, 0, 0) INTB PIRQD
PCI_BDF(3, 0, 0) INTC PIRQA
PCI_BDF(3, 0, 0) INTD PIRQB
PCI_BDF(4, 0, 0) INTA PIRQD
PCI_BDF(4, 0, 0) INTB PIRQA
PCI_BDF(4, 0, 0) INTC PIRQB
PCI_BDF(4, 0, 0) INTD PIRQC
>;
};
spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "stmicro,n25q064a",
"spi-flash";
memory-map = <0xff800000 0x00800000>;
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x006f0000 0x00010000>;
};
};
};
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0 0x20>;
bank-name = "A";
use-lvl-write-cache;
};
gpiob {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x20 0x20>;
bank-name = "B";
use-lvl-write-cache;
};
gpioc {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x40 0x20>;
bank-name = "C";
use-lvl-write-cache;
};
gpiod {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x60 0x20>;
bank-name = "D";
use-lvl-write-cache;
};
gpioe {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x80 0x20>;
bank-name = "E";
use-lvl-write-cache;
};
gpiof {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0xA0 0x20>;
bank-name = "F";
use-lvl-write-cache;
};
};
};
fsp {
compatible = "intel,baytrail-fsp";
fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart0;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
#ifdef CONFIG_USB_XHCI_HCD
fsp,enable-xhci;
#endif
fsp,lpe-mode = <LPE_MODE_PCI>;
fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
fsp,enable-i2c1;
fsp,enable-i2c2;
fsp,enable-i2c3;
fsp,enable-i2c4;
fsp,enable-i2c5;
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
fsp,dram-speed = <DRAM_SPEED_1333MTS>;
fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
fsp,dimm-width = <DIMM_WIDTH_X16>;
fsp,dimm-density = <DIMM_DENSITY_8GBIT>;
fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
/* These following values might need a re-visit */
fsp,dimm-tcl = <8>;
fsp,dimm-trpt-rcd = <8>;
fsp,dimm-twr = <8>;
fsp,dimm-twtr = <4>;
fsp,dimm-trrd = <6>;
fsp,dimm-trtp = <4>;
fsp,dimm-tfaw = <22>;
};
};
microcode {
update@0 {
#include "microcode/m0130673325.dtsi"
};
update@1 {
#include "microcode/m0130679907.dtsi"
};
};
};
Reference in a new issue View git blame Copy permalink