u-boot/board/amcc/redwood/redwood.c
Stefan Roese 952e7760bf ppc4xx: Convert PPC4xx UIC defines from lower case to upper case
The latest PPC4xx register cleanup patch missed the UIC defines.
This patch now changes lower case UIC defines to upper case.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-28 10:45:42 +02:00

456 lines
15 KiB
C

/*
* This is the main board level file for the Redwood AMCC board.
*
* (C) Copyright 2008
* Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include "redwood.h"
#include <ppc4xx.h>
#include <asm/processor.h>
#include <i2c.h>
#include <asm-ppc/io.h>
int compare_to_true(char *str);
char *remove_l_w_space(char *in_str);
char *remove_t_w_space(char *in_str);
int get_console_port(void);
static void early_init_EBC(void);
static int bootdevice_selected(void);
static void early_reinit_EBC(int);
static void early_init_UIC(void);
/*
* Define Boot devices
*/
#define BOOT_FROM_8BIT_SRAM 0x00
#define BOOT_FROM_16BIT_SRAM 0x01
#define BOOT_FROM_32BIT_SRAM 0x02
#define BOOT_FROM_8BIT_NAND 0x03
#define BOOT_FROM_16BIT_NOR 0x04
#define BOOT_DEVICE_UNKNOWN 0xff
/*
* EBC Devices Characteristics
* Peripheral Bank Access Parameters - EBC_BxAP
* Peripheral Bank Configuration Register - EBC_BxCR
*/
/*
* 8 bit width SRAM
* BU Value
* BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
* B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000
* B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000
*/
#define EBC_BXAP_8BIT_SRAM \
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
EBC_BXAP_PEN_DISABLED
#define EBC_BXAP_16BIT_SRAM EBC_BXAP_8BIT_SRAM
#define EBC_BXAP_32BIT_SRAM EBC_BXAP_8BIT_SRAM
/*
* NAND flash
* BU Value
* BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
* B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
* B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
*/
#define EBC_BXAP_NAND \
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
EBC_BXAP_PEN_DISABLED
/*
* NOR flash
* BU Value
* BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
* B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
* B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
*/
#define EBC_BXAP_NOR \
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
EBC_BXAP_PEN_DISABLED
/*
* FPGA
* BU value :
* B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
* B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000
*/
#define EBC_BXAP_FPGA \
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(11) | \
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
EBC_BXAP_CSN_ENCODE(10) | EBC_BXAP_OEN_ENCODE(1) | \
EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | \
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_RE_DISABLED | \
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED
#define EBC_BXCR_8BIT_SRAM_CS0 \
EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_1MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
#define EBC_BXCR_32BIT_SRAM_CS0 \
EBC_BXCR_BAS_ENCODE(0xFFC00000) | EBC_BXCR_BS_1MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
#define EBC_BXCR_NAND_CS0 \
EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
#define EBC_BXCR_16BIT_SRAM_CS0 \
EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_2MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
#define EBC_BXCR_NOR_CS0 \
EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
#define EBC_BXCR_NOR_CS1 \
EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
#define EBC_BXCR_NAND_CS1 \
EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
#define EBC_BXCR_NAND_CS2 \
EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_128MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
#define EBC_BXCR_SRAM_CS2 \
EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_4MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
#define EBC_BXCR_LARGE_FLASH_CS2 \
EBC_BXCR_BAS_ENCODE(0xE7000000) | EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
#define EBC_BXCR_FPGA_CS3 \
EBC_BXCR_BAS_ENCODE(0xE2000000) | EBC_BXCR_BS_1MB | \
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
/*****************************************************************************
* UBOOT initiated board specific function calls
****************************************************************************/
int board_early_init_f(void)
{
int computed_boot_device = BOOT_DEVICE_UNKNOWN;
/*
* Initialise EBC
*/
early_init_EBC();
/*
* Determine which boot device was selected
*/
computed_boot_device = bootdevice_selected();
/*
* Reinit EBC based on selected boot device
*/
early_reinit_EBC(computed_boot_device);
/*
* Setup for UIC on 460SX redwood board
*/
early_init_UIC();
return 0;
}
int checkboard(void)
{
char *s = getenv("serial#");
printf("Board: Redwood - AMCC 460SX Reference Board");
if (s != NULL) {
puts(", serial# ");
puts(s);
}
putc('\n');
return 0;
}
static void early_init_EBC(void)
{
/*
* Initialize EBC CONFIG -
* Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
* default value :
* 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
*/
mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
EBC_CFG_PTD_ENABLE |
EBC_CFG_RTC_16PERCLK |
EBC_CFG_ATC_PREVIOUS |
EBC_CFG_DTC_PREVIOUS |
EBC_CFG_CTC_PREVIOUS |
EBC_CFG_OEO_PREVIOUS |
EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16);
/*
* PART 1 : Initialize EBC Bank 3
* ==============================
* Bank1 is always associated to the EPLD.
* It has to be initialized prior to other banks settings computation
* since some board registers values may be needed to determine the
* boot type
*/
mtebc(PB1AP, EBC_BXAP_FPGA);
mtebc(PB1CR, EBC_BXCR_FPGA_CS3);
}
static int bootdevice_selected(void)
{
unsigned long sdr0_pinstp;
unsigned long bootstrap_settings;
int computed_boot_device = BOOT_DEVICE_UNKNOWN;
/*
* Determine which boot device was selected
* =================================================
*
* Read Pin Strap Register in PPC460SX
* Result can either be :
* - Boot strap = boot from EBC 8bits => Small Flash
* - Boot strap = boot from PCI
* - Boot strap = IIC
* In case of boot from IIC, read Serial Device Strap Register1
*
* Result can either be :
* - Boot from EBC - EBC Bus Width = 8bits => Small Flash
* - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM
* - Boot from PCI
*/
/* Read Pin Strap Register in PPC460SX */
mfsdr(SDR0_PINSTP, sdr0_pinstp);
bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK;
switch (bootstrap_settings) {
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
/*
* Boot from SRAM, 8bit width
*/
computed_boot_device = BOOT_FROM_8BIT_SRAM;
break;
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
/*
* Boot from SRAM, 32bit width
*/
computed_boot_device = BOOT_FROM_32BIT_SRAM;
break;
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
/*
* Boot from NAND, 8bit width
*/
computed_boot_device = BOOT_FROM_8BIT_NAND;
break;
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
/*
* Boot from SRAM, 16bit width
* Boot setting in IIC EEPROM 0x50
*/
computed_boot_device = BOOT_FROM_16BIT_SRAM;
break;
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5:
/*
* Boot from NOR, 16bit width
* Boot setting in IIC EEPROM 0x54
*/
computed_boot_device = BOOT_FROM_16BIT_NOR;
break;
default:
/* should not be */
computed_boot_device = BOOT_DEVICE_UNKNOWN;
break;
}
return computed_boot_device;
}
static void early_reinit_EBC(int computed_boot_device)
{
/*
* Compute EBC settings depending on selected boot device
* ======================================================
*
* Resulting EBC init will be among following configurations :
*
* - Boot from EBC 8bits => boot from Small Flash selected
* EBC-CS0 = Small Flash
* EBC-CS2 = Large Flash and SRAM
*
* - Boot from EBC 16bits => boot from Large Flash or SRAM
* EBC-CS0 = Large Flash or SRAM
* EBC-CS2 = Small Flash
*
* - Boot from PCI
* EBC-CS0 = not initialized to avoid address contention
* EBC-CS2 = same as boot from Small Flash selected
*/
unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0;
unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
switch (computed_boot_device) {
/*-------------------------------------------------------------------*/
case BOOT_FROM_8BIT_SRAM:
/*-------------------------------------------------------------------*/
ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM;
ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0;
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
break;
/*-------------------------------------------------------------------*/
case BOOT_FROM_16BIT_SRAM:
/*-------------------------------------------------------------------*/
ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM;
ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0;
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
break;
/*-------------------------------------------------------------------*/
case BOOT_FROM_32BIT_SRAM:
/*-------------------------------------------------------------------*/
ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM;
ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0;
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
break;
/*-------------------------------------------------------------------*/
case BOOT_FROM_16BIT_NOR:
/*-------------------------------------------------------------------*/
ebc0_cs0_bxap_value = EBC_BXAP_NOR;
ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0;
ebc0_cs1_bxap_value = EBC_BXAP_NAND;
ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1;
ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
break;
/*-------------------------------------------------------------------*/
case BOOT_FROM_8BIT_NAND:
/*-------------------------------------------------------------------*/
ebc0_cs0_bxap_value = EBC_BXAP_NAND;
ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0;
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
break;
/*-------------------------------------------------------------------*/
default:
/*-------------------------------------------------------------------*/
/* BOOT_DEVICE_UNKNOWN */
break;
}
mtebc(PB0AP, ebc0_cs0_bxap_value);
mtebc(PB0CR, ebc0_cs0_bxcr_value);
mtebc(PB1AP, ebc0_cs1_bxap_value);
mtebc(PB1CR, ebc0_cs1_bxcr_value);
mtebc(PB2AP, ebc0_cs2_bxap_value);
mtebc(PB2CR, ebc0_cs2_bxcr_value);
}
static void early_init_UIC(void)
{
/*
* Initialise UIC registers. Clear all interrupts. Disable all
* interrupts.
* Set critical interrupt values. Set interrupt polarities. Set
* interrupt trigger levels. Make bit 0 High priority. Clear all
* interrupts again.
*/
mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */
mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical
* interrupts */
mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted
* cascade to be checked */
mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical
* interrupts */
mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
}