Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 12:33:41 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/bosch/acc/acc.c
Tom Rini 7da82de916 Xilinx changes for v2023.10-rc1 
global:
 - Use proper U-Boot project name
 
 Fix sparse warnings in zynqmp-clk, zynqmp handoff, board
 
 cmd:
 - Cover incorrect 0 length entries
 
 Versal NET:
 - Add bootmode logic
 - Support SPP production version
 - Add loadpdi command
 
 ZynqMP:
 - Clear pmufw node command ID handling
 - Change power domain behavior around zynqmp_pmufw_node()
 - Fix zynqmp cmd return values and pmufw command
 - Fix R5 tcm init and modes
 
 mmc:
 - Sync Versal NET emmc DT binding
 
 pcie:
 - Add support for ZynqMP PCIe root port
 
 video:
 - Add support for ZynqMP DP
 
 tools:
 - Fix debug message in relocate-rela
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZIcDaAAKCRDKSWXLKUoM
 IZmlAKCbiI7CS8ngZpbzOIuMveebNn1jYgCghyl20Bb2zWoNy+sIY2fPIO9mwx4=
 =wPDv
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2023.10-rc1

global:
- Use proper U-Boot project name

Fix sparse warnings in zynqmp-clk, zynqmp handoff, board

cmd:
- Cover incorrect 0 length entries

Versal NET:
- Add bootmode logic
- Support SPP production version
- Add loadpdi command

ZynqMP:
- Clear pmufw node command ID handling
- Change power domain behavior around zynqmp_pmufw_node()
- Fix zynqmp cmd return values and pmufw command
- Fix R5 tcm init and modes

mmc:
- Sync Versal NET emmc DT binding

pcie:
- Add support for ZynqMP PCIe root port

video:
- Add support for ZynqMP DP

tools:
- Fix debug message in relocate-rela
2023-06-12 16:42:37 -04:00

739 lines
19 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
* Copyright (c) 2019 Bosch Thermotechnik GmbH
* Copyright (c) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
*/
#include <common.h>
#include <cpu_func.h>
#include <bootstage.h>
#include <dm.h>
#include <dm/platform_data/serial_mxc.h>
#include <dm/device-internal.h>
#include <env.h>
#include <hang.h>
#include <init.h>
#include <linux/delay.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <linux/sizes.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/iomux-v3.h>
#include <usb.h>
#include <usb/ehci-ci.h>
#include <fuse.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
#define GPIO_ACC_PLAT_DETECT IMX_GPIO_NR(5, 9)
#define GPIO_ACC_RAM_VOLT_DETECT IMX_GPIO_NR(5, 0)
#define GPIO_BUZZER IMX_GPIO_NR(1, 18)
#define GPIO_LAN1_RESET IMX_GPIO_NR(4, 27)
#define GPIO_LAN2_RESET IMX_GPIO_NR(4, 19)
#define GPIO_LAN3_RESET IMX_GPIO_NR(4, 18)
#define GPIO_USB_HUB_RESET IMX_GPIO_NR(5, 5)
#define GPIO_EXP_RS485_RESET IMX_GPIO_NR(4, 16)
#define GPIO_TOUCH_RESET IMX_GPIO_NR(1, 20)
#define BOARD_INFO_MAGIC 0x19730517
struct board_info {
int magic;
int board;
int rev;
};
static struct board_info *detect_board(void);
#define PFID_BOARD_ACC 0xe
static const char * const name_board[] = {
[PFID_BOARD_ACC] = "ACC",
};
#define PFID_REV_22 0x8
#define PFID_REV_21 0x9
#define PFID_REV_20 0xa
#define PFID_REV_14 0xb
#define PFID_REV_13 0xc
#define PFID_REV_12 0xd
#define PFID_REV_11 0xe
#define PFID_REV_10 0xf
static const char * const name_revision[] = {
[0 ... PFID_REV_10] = "Unknown",
[PFID_REV_10] = "1.0",
[PFID_REV_11] = "1.1",
[PFID_REV_12] = "1.2",
[PFID_REV_13] = "1.3",
[PFID_REV_14] = "1.4",
[PFID_REV_20] = "2.0",
[PFID_REV_21] = "2.1",
[PFID_REV_22] = "2.2",
};
/*
* NXP Reset Default: 0x0001B0B0
* - Schmitt trigger input (PAD_CTL_HYS)
* - 100K Ohm Pull Up (PAD_CTL_PUS_100K_UP)
* - Pull Enabled (PAD_CTL_PUE)
* - Pull/Keeper Enabled (PAD_CTL_PKE)
* - CMOS output (No PAD_CTL_ODE)
* - Medium Speed (PAD_CTL_SPEED_MED)
* - 40 Ohm drive strength (PAD_CTL_DSE_40ohm)
* - Slow (PAD_CTL_SRE_SLOW)
*/
/* Input, no pull up/down: 0x0x000100B0 */
#define GPIN_PAD_CTRL (PAD_CTL_HYS \
| PAD_CTL_SPEED_MED \
| PAD_CTL_DSE_40ohm \
| PAD_CTL_SRE_SLOW)
/* Input, pull up: 0x0x0001B0B0 */
#define GPIN_PU_PAD_CTRL (PAD_CTL_HYS \
| PAD_CTL_PUS_100K_UP \
| PAD_CTL_PUE \
| PAD_CTL_PKE \
| PAD_CTL_SPEED_MED \
| PAD_CTL_DSE_40ohm \
| PAD_CTL_SRE_SLOW)
/* Input, pull down: 0x0x000130B0 */
#define GPIN_PD_PAD_CTRL (PAD_CTL_HYS \
| PAD_CTL_PUS_100K_DOWN \
| PAD_CTL_PUE \
| PAD_CTL_PKE \
| PAD_CTL_SPEED_MED \
| PAD_CTL_DSE_40ohm \
| PAD_CTL_SRE_SLOW)
static const iomux_v3_cfg_t board_detect_pads[] = {
/* Platform detect */
IOMUX_PADS(PAD_DISP0_DAT15__GPIO5_IO09 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
/* RAM Volt detect */
IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
/* PFID 0..9 */
IOMUX_PADS(PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D1__GPIO2_IO01 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D7__GPIO2_IO07 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
/* Manufacturer */
IOMUX_PADS(PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(GPIN_PAD_CTRL)),
/* Redundant */
IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(GPIN_PU_PAD_CTRL))
};
static int gpio_acc_pfid[] = {
IMX_GPIO_NR(2, 0),
IMX_GPIO_NR(2, 1),
IMX_GPIO_NR(2, 2),
IMX_GPIO_NR(2, 3),
IMX_GPIO_NR(2, 4),
IMX_GPIO_NR(6, 14),
IMX_GPIO_NR(6, 15),
IMX_GPIO_NR(2, 5),
IMX_GPIO_NR(2, 6),
IMX_GPIO_NR(2, 7),
IMX_GPIO_NR(6, 16),
IMX_GPIO_NR(5, 4),
};
static int init_gpio(int nr)
{
int ret;
ret = gpio_request(nr, "");
if (ret != 0) {
printf("Could not request gpio nr: %d\n", nr);
hang();
}
ret = gpio_direction_input(nr);
if (ret != 0) {
printf("Could not set gpio nr: %d to input\n", nr);
hang();
}
return 0;
}
/*
* We want to detect the board type only once in SPL,
* so we store the board_info struct at beginning in IRAM.
*
* U-Boot itself can read it also, and do not need again
* to detect board type.
*
*/
static struct board_info *detect_board(void)
{
struct board_info *binfo = (struct board_info *)IRAM_BASE_ADDR;
int i;
if (binfo->magic == BOARD_INFO_MAGIC)
return binfo;
puts("Board: ");
SETUP_IOMUX_PADS(board_detect_pads);
init_gpio(GPIO_ACC_PLAT_DETECT);
if (gpio_get_value(GPIO_ACC_PLAT_DETECT)) {
puts("not supported");
hang();
} else {
puts("Bosch ");
}
for (i = 0; i < sizeof(gpio_acc_pfid) / sizeof(int); i++)
init_gpio(gpio_acc_pfid[i]);
binfo->board = gpio_get_value(gpio_acc_pfid[0]) << 0 |
gpio_get_value(gpio_acc_pfid[1]) << 1 |
gpio_get_value(gpio_acc_pfid[2]) << 2 |
gpio_get_value(gpio_acc_pfid[11]) << 3;
printf("%s ", name_board[binfo->board]);
binfo->rev = gpio_get_value(gpio_acc_pfid[7]) << 0 |
gpio_get_value(gpio_acc_pfid[8]) << 1 |
gpio_get_value(gpio_acc_pfid[9]) << 2 |
gpio_get_value(gpio_acc_pfid[10]) << 3;
printf("rev: %s\n", name_revision[binfo->rev]);
binfo->magic = BOARD_INFO_MAGIC;
return binfo;
}
static void unset_early_gpio(void)
{
init_gpio(GPIO_LAN1_RESET);
init_gpio(GPIO_LAN2_RESET);
init_gpio(GPIO_LAN3_RESET);
init_gpio(GPIO_USB_HUB_RESET);
init_gpio(GPIO_EXP_RS485_RESET);
init_gpio(GPIO_TOUCH_RESET);
gpio_set_value(GPIO_LAN1_RESET, 1);
gpio_set_value(GPIO_LAN2_RESET, 1);
gpio_set_value(GPIO_LAN3_RESET, 1);
gpio_set_value(GPIO_USB_HUB_RESET, 1);
gpio_set_value(GPIO_EXP_RS485_RESET, 1);
gpio_set_value(GPIO_TOUCH_RESET, 1);
}
int board_late_init(void)
{
struct board_info *binfo = detect_board();
switch (binfo->board) {
case PFID_BOARD_ACC:
env_set("bootconf", "conf-imx6q-bosch-acc.dtb");
break;
default:
printf("Unknown board %d\n", binfo->board);
break;
}
unset_early_gpio();
return 0;
}
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
#if IS_ENABLED(CONFIG_SPL_BUILD)
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <spl.h>
/* Early
* - Buzzer -> GPIO IN, Pull-Down (PWM enabled by Kernel later-on, lacks of an
* external pull-down resistor)
* - Touch clean reset on every boot
* - Ethernet(s), USB Hub, Expansion RS485 -> Clean reset on each u-boot init
*/
static const iomux_v3_cfg_t early_pads[] = {
IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* Buzzer PWM */
IOMUX_PADS(PAD_DISP0_DAT6__GPIO4_IO27 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #FEC_RESET_B */
IOMUX_PADS(PAD_DI0_PIN2__GPIO4_IO18 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #ETH1_RESET */
IOMUX_PADS(PAD_DI0_PIN3__GPIO4_IO19 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #ETH2_RESET */
IOMUX_PADS(PAD_DISP0_DAT11__GPIO5_IO05 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #USB Reset */
IOMUX_PADS(PAD_DI0_DISP_CLK__GPIO4_IO16 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #UART_RESET */
IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(GPIN_PD_PAD_CTRL)), /* #CTOUCH_RESET */
};
static void setup_iomux_early(void)
{
SETUP_IOMUX_PADS(early_pads);
}
static void set_early_gpio(void)
{
init_gpio(GPIO_BUZZER);
init_gpio(GPIO_LAN1_RESET);
init_gpio(GPIO_LAN2_RESET);
init_gpio(GPIO_LAN3_RESET);
init_gpio(GPIO_USB_HUB_RESET);
init_gpio(GPIO_EXP_RS485_RESET);
init_gpio(GPIO_TOUCH_RESET);
/* Reset signals are active low */
gpio_set_value(GPIO_BUZZER, 0);
gpio_set_value(GPIO_LAN1_RESET, 0);
gpio_set_value(GPIO_LAN2_RESET, 0);
gpio_set_value(GPIO_LAN3_RESET, 0);
gpio_set_value(GPIO_USB_HUB_RESET, 0);
gpio_set_value(GPIO_EXP_RS485_RESET, 0);
gpio_set_value(GPIO_TOUCH_RESET, 0);
}
/* UART */
#define UART_PAD_CTRL \
(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#undef UART_PAD_CTRL
#define UART_PAD_CTRL 0x1b0b1
static const iomux_v3_cfg_t uart2_pads[] = {
IOMUX_PADS(PAD_SD3_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT5__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CMD__UART2_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_CLK__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL)),
};
static void setup_iomux_uart(void)
{
SETUP_IOMUX_PADS(uart2_pads);
}
void spl_board_init(void)
{
}
static const struct mx6dq_iomux_ddr_regs acc_mx6d_ddr_ioregs = {
.dram_sdclk_0 = 0x00008038,
.dram_sdclk_1 = 0x00008038,
.dram_cas = 0x00008028,
.dram_ras = 0x00008028,
.dram_reset = 0x00000028,
.dram_sdcke0 = 0x00003000,
.dram_sdcke1 = 0x00003000,
.dram_sdba2 = 0x00008000,
.dram_sdodt0 = 0x00000028,
.dram_sdodt1 = 0x00000028,
.dram_sdqs0 = 0x00008038,
.dram_sdqs1 = 0x00008038,
.dram_sdqs2 = 0x00008038,
.dram_sdqs3 = 0x00008038,
.dram_sdqs4 = 0x00008038,
.dram_sdqs5 = 0x00008038,
.dram_sdqs6 = 0x00008038,
.dram_sdqs7 = 0x00008038,
.dram_dqm0 = 0x00008038,
.dram_dqm1 = 0x00008038,
.dram_dqm2 = 0x00008038,
.dram_dqm3 = 0x00008038,
.dram_dqm4 = 0x00008038,
.dram_dqm5 = 0x00008038,
.dram_dqm6 = 0x00008038,
.dram_dqm7 = 0x00008038,
};
static const struct mx6dq_iomux_grp_regs acc_mx6d_grp_ioregs = {
.grp_ddr_type = 0x000C0000,
.grp_ddrmode_ctl = 0x00020000,
.grp_ddrpke = 0x00000000,
.grp_addds = 0x00000030,
.grp_ctlds = 0x00000028,
.grp_ddrmode = 0x00020000,
.grp_b0ds = 0x00000038,
.grp_b1ds = 0x00000038,
.grp_b2ds = 0x00000038,
.grp_b3ds = 0x00000038,
.grp_b4ds = 0x00000038,
.grp_b5ds = 0x00000038,
.grp_b6ds = 0x00000038,
.grp_b7ds = 0x00000038,
};
static const struct mx6_mmdc_calibration acc_mx6d_mmdc_calib = {
.p0_mpwldectrl0 = 0x0020001F,
.p0_mpwldectrl1 = 0x00280021,
.p1_mpwldectrl0 = 0x00120028,
.p1_mpwldectrl1 = 0x000D001F,
.p0_mpdgctrl0 = 0x43340342,
.p0_mpdgctrl1 = 0x03300325,
.p1_mpdgctrl0 = 0x4334033E,
.p1_mpdgctrl1 = 0x03280270,
.p0_mprddlctl = 0x46373B3E,
.p1_mprddlctl = 0x3B383544,
.p0_mpwrdlctl = 0x36383E40,
.p1_mpwrdlctl = 0x4030433A,
};
/* Micron MT41K128M16JT-125 (standard - 1600,CL=11)
* !!! i.MX6 does NOT support data rates higher than DDR3-1066 !!!
* So this setting is actually invalid!
*
static const struct mx6_ddr3_cfg acc_mx6d_mem_ddr3_1600 = {
.mem_speed = 1600,
.density = 2,
.width = 16,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
.trcd = 1375,
.trcmin = 4875,
.trasmin = 3500,
.SRT = 0,
};
*/
/* Micron MT41K128M16JT-125 is backward-compatible with 1333,CL=9 (-15E) and 1066,CL=7 (-187E)
* Lowering to 1066 saves on ACC ~0.25 Watt at DC In with negligible performance loss
* width set to 64, as four chips are used on acc (4 * 16 = 64)
*/
static const struct mx6_ddr3_cfg acc_mx6d_mem_ddr3_1066 = {
.mem_speed = 1066,
.density = 2,
.width = 64,
.banks = 8,
.rowaddr = 14,
.coladdr = 10,
.pagesz = 2,
.trcd = 1313, // 13.125ns
.trcmin = 5063, // 50.625ns
.trasmin = 3750, // 37.5ns
.SRT = 0, // Set to 1 for temperatures above 85°C
};
static const struct mx6_ddr_sysinfo acc_mx6d_ddr_info = {
.ddr_type = DDR_TYPE_DDR3,
/* width of data bus:0=16,1=32,2=64 */
.dsize = 2,
.cs_density = 32, /* 32Gb per CS */
.ncs = 1, /* single chip select */
.cs1_mirror = 0,
.rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
.rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
.walat = 0, /* Write additional latency */
.ralat = 5, /* Read additional latency */
.mif3_mode = 3, /* Command prediction working mode */
.bi_on = 1, /* Bank interleaving enabled */
.sde_to_rst = 0x33, /* 14 cycles, 200us (JEDEC default) */
.rst_to_cke = 0x33, /* 33 cycles, 500us (JEDEC default) */
};
#define ACC_SPREAD_SPECTRUM_STOP 0x0fa
#define ACC_SPREAD_SPECTRUM_STEP 0x001
#define ACC_SPREAD_SPECTRUM_DENOM 0x190
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
/* Turn clocks on/off */
writel(0x00C0000F, &ccm->CCGR0);
writel(0x0030FC00, &ccm->CCGR1);
writel(0x03FF0033, &ccm->CCGR2);
writel(0x3FF3300F, &ccm->CCGR3);
writel(0x0003C300, &ccm->CCGR4);
writel(0x0F3000C3, &ccm->CCGR5);
writel(0x00000FFF, &ccm->CCGR6);
/* Enable spread spectrum */
writel(BM_ANADIG_PLL_528_SS_ENABLE |
BF_ANADIG_PLL_528_SS_STOP(ACC_SPREAD_SPECTRUM_STOP) |
BF_ANADIG_PLL_528_SS_STEP(ACC_SPREAD_SPECTRUM_STEP),
&ccm->analog_pll_528_ss);
writel(BF_ANADIG_PLL_528_DENOM_B(ACC_SPREAD_SPECTRUM_DENOM),
&ccm->analog_pll_528_denom);
}
/* MMC board initialization is needed till adding DM support in SPL */
#if IS_ENABLED(CONFIG_FSL_ESDHC_IMX) && !IS_ENABLED(CONFIG_DM_MMC)
#include <mmc.h>
#include <fsl_esdhc_imx.h>
static const iomux_v3_cfg_t usdhc2_pads[] = {
IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(0x00017069)),
IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(0x00010038)),
IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(0x00017069)),
IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(0x00017069)),
IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(0x00017069)),
IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(0x00017069)),
IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(0x0001B0B0)), /* CD */
};
static const iomux_v3_cfg_t usdhc4_pads[] = {
IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(0x00010059)),
IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(0x00017059)),
IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(0x00017059)),
};
struct fsl_esdhc_cfg usdhc_cfg[2] = {
{USDHC2_BASE_ADDR, 1, 4},
{USDHC4_BASE_ADDR, 1, 8},
};
#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
detect_board();
switch (cfg->esdhc_base) {
case USDHC2_BASE_ADDR:
return !gpio_get_value(USDHC2_CD_GPIO);
case USDHC4_BASE_ADDR:
return 1; /* eMMC always present */
}
return ret;
}
int board_mmc_init(struct bd_info *bis)
{
int i, ret;
gpio_direction_input(USDHC2_CD_GPIO);
/*
* According to the board_mmc_init() the following map is done:
* (U-Boot device node) (Physical Port)
* mmc0 USDHC2
* mmc1 USDHC4
*/
for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
case 0:
SETUP_IOMUX_PADS(usdhc2_pads);
usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
case 1:
SETUP_IOMUX_PADS(usdhc4_pads);
usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
break;
default:
printf("Warning - USDHC%d controller not supporting\n",
i + 1);
return 0;
}
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
if (ret) {
printf("Warning: failed to initialize mmc dev %d\n", i);
return ret;
}
}
return 0;
}
#endif
void board_boot_order(u32 *spl_boot_list)
{
u32 bmode = imx6_src_get_boot_mode();
u8 boot_dev = BOOT_DEVICE_MMC1;
detect_board();
switch ((bmode & IMX6_BMODE_MASK) >> IMX6_BMODE_SHIFT) {
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
/* SD/eSD - BOOT_DEVICE_MMC1 */
if (IS_ENABLED(CONFIG_SYS_BOOT_EMMC)) {
/*
* boot from SD is not allowed, if boot from eMMC is
* configured.
*/
puts("SD boot not allowed\n");
spl_boot_list[0] = BOOT_DEVICE_NONE;
return;
}
boot_dev = BOOT_DEVICE_MMC1;
break;
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
/* MMC/eMMC */
boot_dev = BOOT_DEVICE_MMC2;
break;
default:
/* Default - BOOT_DEVICE_MMC1 */
printf("Wrong board boot order\n");
break;
}
spl_boot_list[0] = boot_dev;
}
static void setup_ddr(void)
{
struct board_info *binfo = detect_board();
switch (binfo->rev) {
case PFID_REV_20:
case PFID_REV_21:
case PFID_REV_22:
default:
/* Rev 2 board has i.MX6 Dual with 64-bit RAM */
mx6dq_dram_iocfg(acc_mx6d_mem_ddr3_1066.width,
&acc_mx6d_ddr_ioregs,
&acc_mx6d_grp_ioregs);
mx6_dram_cfg(&acc_mx6d_ddr_info, &acc_mx6d_mmdc_calib,
&acc_mx6d_mem_ddr3_1066);
/* Perform DDR DRAM calibration */
udelay(100);
mmdc_do_write_level_calibration(&acc_mx6d_ddr_info);
mmdc_do_dqs_calibration(&acc_mx6d_ddr_info);
break;
}
}
void board_init_f(ulong dummy)
{
/* setup AIPS and disable watchdog power-down counter (only enabled after reset) */
arch_cpu_init();
ccgr_init();
gpr_init();
/* setup GP timer */
timer_init();
/* Enable device tree and early DM support*/
spl_early_init();
/* Setup early required pinmuxes */
setup_iomux_early();
set_early_gpio();
/* Setup UART pinmux */
setup_iomux_uart();
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
setup_ddr();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
/* load/boot image from boot device */
board_init_r(NULL, 0);
}
#endif
#if IS_ENABLED(CONFIG_USB_EHCI_MX6)
#define USB_OTHERREGS_OFFSET 0x800
#define UCTRL_PWR_POL BIT(9)
int board_usb_phy_mode(int port)
{
if (port == 1)
return USB_INIT_HOST;
else
return usb_phy_mode(port);
}
int board_ehci_hcd_init(int port)
{
u32 *usbnc_usb_ctrl;
if (port > 1)
return -EINVAL;
usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
port * 4);
/* Set Power polarity */
setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
return 0;
}
#endif
int board_fit_config_name_match(const char *name)
{
if (!strcmp(name, "imx6q-bosch-acc"))
return 0;
return -1;
}
void reset_cpu(void)
{
puts("Hanging CPU for watchdog reset!\n");
hang();
}
#if CONFIG_IS_ENABLED(SHOW_BOOT_PROGRESS)
void show_boot_progress(int val)
{
u32 fuseval;
int ret;
if (val < 0)
val *= -1;
switch (val) {
case BOOTSTAGE_ID_ENTER_CLI_LOOP:
printf("autoboot failed, check fuse\n");
ret = fuse_read(0, 6, &fuseval);
if (ret == 0 && (fuseval & 0x2) == 0x0) {
printf("Enter cmdline, as device not closed\n");
return;
}
ret = fuse_read(5, 7, &fuseval);
if (ret == 0 && fuseval == 0x0) {
printf("Enter cmdline, as it is a Development device\n");
return;
}
panic("do not enter cmdline");
break;
}
}
#endif
Reference in a new issue View git blame Copy permalink