u-boot/board/toradex/common/Kconfig
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

69 lines
1.8 KiB
Text

# SPDX-License-Identifier: GPL-2.0+
# Copyright (c) 2016 Toradex, Inc.
menuconfig TDX_CFG_BLOCK
bool "Enable Toradex config block support"
select OF_BOARD_SETUP
help
The Toradex config block stored production data on the on-module
flash device (NAND, NOR or eMMC). The area is normally preserved by
software and contains the serial number (out of which the MAC
address is generated) and the exact module type.
# Helper config to determine the correct default location of the cfg block
config TDX_HAVE_MMC
bool
config TDX_HAVE_NAND
bool
config TDX_HAVE_NOR
bool
if TDX_CFG_BLOCK
config TDX_CFG_BLOCK_IS_IN_MMC
bool
depends on TDX_HAVE_MMC
default y
config TDX_CFG_BLOCK_IS_IN_NAND
bool
depends on TDX_HAVE_NAND
default y
config TDX_CFG_BLOCK_IS_IN_NOR
bool
depends on TDX_HAVE_NOR
default y
config TDX_CFG_BLOCK_DEV
int "Toradex config block eMMC device ID"
depends on TDX_CFG_BLOCK_IS_IN_MMC
config TDX_CFG_BLOCK_PART
int "Toradex config block eMMC partition ID"
depends on TDX_CFG_BLOCK_IS_IN_MMC
config TDX_CFG_BLOCK_OFFSET
int "Toradex config block offset"
help
Specify the byte offset of the Toradex config block within the flash
device the config block is stored on.
config TDX_CFG_BLOCK_OFFSET2
int "Toradex config block offset, second instance"
default 0
help
Specify the byte offset of the 2nd instance of the Toradex config block
within the flash device the config block is stored on.
Set to 0 on modules which have no 2nd instance.
config TDX_CFG_BLOCK_2ND_ETHADDR
bool "Set the second Ethernet address"
help
For each serial number two Ethernet addresses are available for dual
Ethernet carrier boards. This options enables the code to set the
second Ethernet address as environment variable (eth1addr).
endif