u-boot/arch/arm/mach-k3
Andreas Dannenberg 921b325854 arm: K3: sysfw-loader: Allow loading SYSFW via Y-Modem
In order to allow booting TI K3 family SoCs via Y-Modem add support for
loading System Firmware by tapping into the associated SPL core loader
function.

In this context also make sure a console is available and if not go
ahead and activate the early console feature which allows bringing up
an alternate full console before the main console is activated. Such
an alternate console is typically setup in a way that the associated
UART can be fully initialized prior to SYSFW services being available.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-10-11 10:07:33 -04:00
..
include/mach board: ti: am654: Disable TRNG node for HS devices 2019-10-04 12:21:23 -04:00
am6_init.c arm: k3: Use get_ti_sci_handle() where ever possible 2019-09-13 11:56:30 -04:00
arm64-mmu.c armv8: K3: j721e: Add custom MMU support 2019-07-26 21:49:27 -04:00
common.c arm: K3: common: Allow for early console functionality 2019-10-11 10:07:33 -04:00
common.h arm: K3: common: Allow for early console functionality 2019-10-11 10:07:33 -04:00
config.mk arm: k3: config.mk: Use k3_gen_x509_cert.sh to generate boot images 2019-05-09 20:22:05 -04:00
config_secure.mk arm: mach-k3: Add secure device build support 2019-04-26 17:51:51 -04:00
j721e_init.c armv7R: K3: j721e: Load SYSFW binary and config from boot media 2019-07-26 21:49:27 -04:00
Kconfig arm: K3: common: Allow for early console functionality 2019-10-11 10:07:33 -04:00
lowlevel_init.S armv7r: K3: Allow SPL to run only on core 0 2018-11-26 22:52:11 -05:00
Makefile arm: K3: j721e: Add basic support for J721E SoC definition 2019-07-26 21:49:25 -04:00
r5_mpu.c armv7R: K3: am654: Enable MPU regions 2018-11-16 16:51:58 -05:00
security.c arm: k3: Use get_ti_sci_handle() where ever possible 2019-09-13 11:56:30 -04:00
sysfw-loader.c arm: K3: sysfw-loader: Allow loading SYSFW via Y-Modem 2019-10-11 10:07:33 -04:00