u-boot/arch/arm/mach-uniphier/sc64-regs.h
Masahiro Yamada a55957b9ad ARM: uniphier: move PLLCTRL register macros to each SoC .c file
The new SoC PXs3 changed the address of PLL, but still uses the
same PLL name.  We can not define SC_*PLLCTRL in the common header.
Move them to per-SoC .c file.  Also, fix some PLL comments.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-30 09:03:11 +09:00

55 lines
1.8 KiB
C

/*
* UniPhier SC (System Control) block registers for ARMv8 SoCs
*
* Copyright (C) 2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef SC64_REGS_H
#define SC64_REGS_H
#define SC_BASE_ADDR 0x61840000
#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000)
#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008)
#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c)
#define SC_RSTCTRL4_ETHER (1 << 6)
#define SC_RSTCTRL4_NAND (1 << 0)
#define SC_RSTCTRL5 (SC_BASE_ADDR | 0x2010)
#define SC_RSTCTRL6 (SC_BASE_ADDR | 0x2014)
#define SC_RSTCTRL7 (SC_BASE_ADDR | 0x2018)
#define SC_RSTCTRL7_UMCSB (1 << 16)
#define SC_RSTCTRL7_UMCA2 (1 << 10)
#define SC_RSTCTRL7_UMCA1 (1 << 9)
#define SC_RSTCTRL7_UMCA0 (1 << 8)
#define SC_RSTCTRL7_UMC32 (1 << 2)
#define SC_RSTCTRL7_UMC31 (1 << 1)
#define SC_RSTCTRL7_UMC30 (1 << 0)
#define SC_CLKCTRL (SC_BASE_ADDR | 0x2100)
#define SC_CLKCTRL3 (SC_BASE_ADDR | 0x2108)
#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c)
#define SC_CLKCTRL4_MIO (1 << 10)
#define SC_CLKCTRL4_STDMAC (1 << 8)
#define SC_CLKCTRL4_PERI (1 << 7)
#define SC_CLKCTRL4_ETHER (1 << 6)
#define SC_CLKCTRL4_NAND (1 << 0)
#define SC_CLKCTRL5 (SC_BASE_ADDR | 0x2110)
#define SC_CLKCTRL6 (SC_BASE_ADDR | 0x2114)
#define SC_CLKCTRL7 (SC_BASE_ADDR | 0x2118)
#define SC_CLKCTRL7_UMCSB (1 << 16)
#define SC_CLKCTRL7_UMC32 (1 << 2)
#define SC_CLKCTRL7_UMC31 (1 << 1)
#define SC_CLKCTRL7_UMC30 (1 << 0)
#define SC_CA72_GEARST (SC_BASE_ADDR | 0x8000)
#define SC_CA72_GEARSET (SC_BASE_ADDR | 0x8004)
#define SC_CA72_GEARUPD (SC_BASE_ADDR | 0x8008)
#define SC_CA53_GEARST (SC_BASE_ADDR | 0x8080)
#define SC_CA53_GEARSET (SC_BASE_ADDR | 0x8084)
#define SC_CA53_GEARUPD (SC_BASE_ADDR | 0x8088)
#define SC_CA_GEARUPD (1 << 0)
#endif /* SC64_REGS_H */