mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-19 01:33:10 +00:00
91caa3bb89
Add a new event which handles this function. Convert existing use of the function to use the new event instead. Make sure that EVENT is enabled by affected boards, by selecting it from the LAST_STAGE_INIT option. For x86, enable it by default since all boards need it. For controlcenterdc, inline the get_tpm() function and make sure the event is not built in SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
304 lines
6.8 KiB
C
304 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
|
|
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <event.h>
|
|
#include <init.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <tpm-v1.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
|
|
#include "../arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h"
|
|
|
|
#include "keyprogram.h"
|
|
#include "dt_helpers.h"
|
|
#include "hydra.h"
|
|
#include "ihs_phys.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_LOW 0x7fffffff
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_MID 0xffffefff
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_MID 0x00001000
|
|
#define DB_GP_88F68XX_GPP_POL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_POL_MID 0x0
|
|
|
|
/*
|
|
* Define the DDR layout / topology here in the board file. This will
|
|
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
|
* the DDR3 controller.
|
|
*/
|
|
static struct mv_ddr_topology_map ddr_topology_map = {
|
|
DEBUG_LEVEL_ERROR,
|
|
0x1, /* active interfaces */
|
|
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
|
{ { { {0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0} },
|
|
SPEED_BIN_DDR_1600K, /* speed_bin */
|
|
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
|
|
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
|
|
MV_DDR_FREQ_533, /* frequency */
|
|
0, 0, /* cas_wl cas_l */
|
|
MV_DDR_TEMP_LOW, /* temperature */
|
|
MV_DDR_TIM_DEFAULT} }, /* timing */
|
|
BUS_MASK_32BIT, /* Busses mask */
|
|
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
|
NOT_COMBINED, /* ddr twin-die combined */
|
|
{ {0} }, /* raw spd data */
|
|
{0} /* timing parameters */
|
|
|
|
};
|
|
|
|
static struct serdes_map serdes_topology_map[] = {
|
|
{SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
/* SATA tx polarity is inverted */
|
|
{SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 1},
|
|
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{DEFAULT_SERDES, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
|
|
};
|
|
|
|
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
|
{
|
|
*serdes_map_array = serdes_topology_map;
|
|
*count = ARRAY_SIZE(serdes_topology_map);
|
|
return 0;
|
|
}
|
|
|
|
void spl_board_init(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
uint k;
|
|
struct gpio_desc gpio = {};
|
|
|
|
/* Enable PCIe link 2 */
|
|
setbits_32(MVEBU_REGISTER(0x18204), BIT(2));
|
|
mdelay(10);
|
|
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 31, "fpga-program-gpio")) {
|
|
/* prepare FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 0);
|
|
|
|
/* give lunatic PCIe clock some time to stabilize */
|
|
mdelay(500);
|
|
|
|
/* start FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_IN);
|
|
}
|
|
|
|
/* wait for FPGA done */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 19, "fpga-done-gpio")) {
|
|
for (k = 0; k < 20; ++k) {
|
|
if (dm_gpio_get_value(&gpio)) {
|
|
printf("FPGA done after %u rounds\n", k);
|
|
break;
|
|
}
|
|
mdelay(100);
|
|
}
|
|
}
|
|
|
|
/* disable FPGA reset */
|
|
if (!request_gpio_by_name(&gpio, "gpio@18100", 6, "cpu-to-fpga-reset")) {
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 1);
|
|
}
|
|
|
|
/* wait for FPGA ready */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 27, "fpga-ready-gpio")) {
|
|
for (k = 0; k < 2; ++k) {
|
|
if (!dm_gpio_get_value(&gpio))
|
|
break;
|
|
mdelay(100);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
|
{
|
|
return &ddr_topology_map;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Configure MPP */
|
|
writel(0x00111111, MVEBU_MPP_BASE + 0x00);
|
|
writel(0x40040000, MVEBU_MPP_BASE + 0x04);
|
|
writel(0x00466444, MVEBU_MPP_BASE + 0x08);
|
|
writel(0x00043300, MVEBU_MPP_BASE + 0x0c);
|
|
writel(0x44400000, MVEBU_MPP_BASE + 0x10);
|
|
writel(0x20000334, MVEBU_MPP_BASE + 0x14);
|
|
writel(0x40000000, MVEBU_MPP_BASE + 0x18);
|
|
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
|
|
|
|
/* Set GPP Out value */
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
|
|
|
/* Set GPP Polarity */
|
|
writel(DB_GP_88F68XX_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
|
writel(DB_GP_88F68XX_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
|
|
|
/* Set GPP Out Enable */
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Address of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
void init_host_phys(struct mii_dev *bus)
|
|
{
|
|
uint k;
|
|
|
|
for (k = 0; k < 2; ++k) {
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_find_by_mask(bus, 1 << k);
|
|
|
|
if (phydev) {
|
|
phydev->interface = PHY_INTERFACE_MODE_SGMII;
|
|
phy_config(phydev);
|
|
}
|
|
}
|
|
}
|
|
|
|
int ccdc_eth_init(void)
|
|
{
|
|
uint k;
|
|
uint octo_phy_mask = 0;
|
|
int ret;
|
|
struct mii_dev *bus;
|
|
|
|
/* Init SoC's phys */
|
|
bus = miiphy_get_dev_by_name("ethernet@34000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
bus = miiphy_get_dev_by_name("ethernet@70000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
/* Init octo phys */
|
|
octo_phy_mask = calculate_octo_phy_mask();
|
|
|
|
printf("IHS PHYS: %08x", octo_phy_mask);
|
|
|
|
ret = init_octo_phys(octo_phy_mask);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
printf("\n");
|
|
|
|
if (!get_fpga()) {
|
|
puts("fpga was NULL\n");
|
|
return 1;
|
|
}
|
|
|
|
/* reset all FPGA-QSGMII instances */
|
|
for (k = 0; k < 80; ++k)
|
|
writel(1 << 31, get_fpga()->qsgmii_port_state[k]);
|
|
|
|
udelay(100);
|
|
|
|
for (k = 0; k < 80; ++k)
|
|
writel(0, get_fpga()->qsgmii_port_state[k]);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
hydra_initialize();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_fix_fdt(void *rw_fdt_blob)
|
|
{
|
|
struct udevice *bus = NULL;
|
|
uint k;
|
|
char name[64];
|
|
int err;
|
|
|
|
err = uclass_get_device_by_name(UCLASS_I2C, "i2c@11000", &bus);
|
|
|
|
if (err) {
|
|
printf("Could not get I2C bus.\n");
|
|
return err;
|
|
}
|
|
|
|
for (k = 0x21; k <= 0x26; k++) {
|
|
snprintf(name, 64,
|
|
"/soc/internal-regs/i2c@11000/pca9698@%02x", k);
|
|
|
|
if (!dm_i2c_simple_probe(bus, k))
|
|
fdt_disable_by_ofname(rw_fdt_blob, name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
static int last_stage_init(void)
|
|
{
|
|
struct udevice *tpm;
|
|
int ret;
|
|
|
|
if (IS_ENABLED(CONFIG_SPL_BUILD))
|
|
return 0;
|
|
ccdc_eth_init();
|
|
|
|
ret = uclass_first_device_err(UCLASS_TPM, &tpm);
|
|
if (ret) {
|
|
printf("Could not find TPM (ret=%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ret || tpm_init(tpm) || tpm1_startup(tpm, TPM_ST_CLEAR) ||
|
|
tpm1_continue_self_test(tpm)) {
|
|
return 1;
|
|
}
|
|
|
|
mdelay(37);
|
|
|
|
flush_keys(tpm);
|
|
load_and_run_keyprog(tpm);
|
|
|
|
return 0;
|
|
}
|
|
EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, last_stage_init);
|
|
#endif
|