u-boot/arch/arm/mach-uniphier/sbc/sbc-savepin.c
Masahiro Yamada 5b66006646 ARM: uniphier: rename function names ph1_* to uniphier_*
Eliminate the "ph1"_ prefixes from function names because "uniphier_"
describes the SoC familiy better.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01 00:59:47 +09:00

57 lines
1.6 KiB
C

/*
* Copyright (C) 2011-2016 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/io.h>
#include "../init.h"
#include "sbc-regs.h"
/* slower but LED works */
#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00
#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110
/* faster but LED does not work */
#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700
/* NOR flash needs more wait counts than SRAM */
#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210
int uniphier_sbc_init_savepin(const struct uniphier_board_data *bd)
{
/*
* Only CS1 is connected to support card.
* BKSZ[1:0] should be set to "01".
*/
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
* 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
* 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
* 0x40000000-0x41ffffff: mask ROM
* 0x42000000-0x43efffff: memory bank (31MB)
* 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
return 0;
}