mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
25ddd1fb0a
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
202 lines
6.8 KiB
C
202 lines
6.8 KiB
C
/*
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
*
|
|
* Configuration settings for the MX31ADS Freescale board.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/mx31-regs.h>
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
|
|
#define CONFIG_MX31 1 /* in a mx31 */
|
|
#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */
|
|
#define CONFIG_MX31_CLK32 32768
|
|
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/*
|
|
* Disabled for now due to build problems under Debian and a significant increase
|
|
* in the final file size: 144260 vs. 109536 Bytes.
|
|
*/
|
|
#if 0
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_FIT 1
|
|
#define CONFIG_FIT_VERBOSE 1
|
|
#endif
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
#define CONFIG_MXC_UART 1
|
|
#define CONFIG_SYS_MX31_UART1 1
|
|
|
|
#define CONFIG_HARD_SPI 1
|
|
#define CONFIG_MXC_SPI 1
|
|
#define CONFIG_DEFAULT_SPI_BUS 1
|
|
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
|
|
|
|
#define CONFIG_FSL_PMIC
|
|
#define CONFIG_FSL_PMIC_BUS 1
|
|
#define CONFIG_FSL_PMIC_CS 0
|
|
#define CONFIG_FSL_PMIC_CLK 1000000
|
|
#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
|
|
#define CONFIG_RTC_MC13783 1
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
|
|
|
/***********************************************************
|
|
* Command definition
|
|
***********************************************************/
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_DATE
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"uboot_addr=0xa0000000\0" \
|
|
"uboot=mx31ads/u-boot.bin\0" \
|
|
"kernel=mx31ads/uImage\0" \
|
|
"nfsroot=/opt/eldk/arm\0" \
|
|
"bootargs_base=setenv bootargs console=ttymxc0,115200\0" \
|
|
"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"bootcmd=run bootcmd_net\0" \
|
|
"bootcmd_net=run bootargs_base bootargs_nfs; " \
|
|
"tftpboot ${loadaddr} ${kernel}; bootm\0" \
|
|
"prg_uboot=tftpboot ${loadaddr} ${uboot}; " \
|
|
"protect off ${uboot_addr} 0xa003ffff; " \
|
|
"erase ${uboot_addr} 0xa003ffff; " \
|
|
"cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \
|
|
"setenv filesize; saveenv\0"
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_CS8900
|
|
#define CONFIG_CS8900_BASE 0xb4020300
|
|
#define CONFIG_CS8900_BUS16 1 /* follow the Linux driver */
|
|
|
|
/*
|
|
* The MX31ADS board seems to have a hardware "peculiarity" confirmed under
|
|
* U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
|
|
* controller inverted. The controller is capable of detecting and correcting
|
|
* this, but it needs 4 network packets for that. Which means, at startup, you
|
|
* will not receive answers to the first 4 packest, unless there have been some
|
|
* broadcasts on the network, or your board is on a hub. Reducing the ARP
|
|
* timeout from default 5 seconds to 200ms we speed up the initial TFTP
|
|
* transfer, should the user wish one, significantly.
|
|
*/
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x10000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 CSD0_BASE
|
|
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE CS0_BASE
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_SECT_SIZE (32 * 1024)
|
|
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
|
|
* The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
|
|
* if we put environment next to it, we will have to occupy 128KiB for it.
|
|
* Putting it at the top of flash we use only 32KiB. */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CFI FLASH driver setup
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
|
|
#define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
|
|
|
|
/*
|
|
* JFFS2 partitions
|
|
*/
|
|
#undef CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_JFFS2_DEV "nor0"
|
|
|
|
#endif /* __CONFIG_H */
|