u-boot/configs/a7y17lte_defconfig
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

26 lines
1.2 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="exynos78x0-common"
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=26000000
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x40001000
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_ARCH_EXYNOS7=y
CONFIG_TARGET_A7Y17LTE=y
CONFIG_NR_DRAM_BANKS=12
CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
CONFIG_SYS_LOAD_ADDR=0x40001000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
CONFIG_FIT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
CONFIG_SAVE_PREV_BL_FDT_ADDR=y
CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=1024
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_DM_I2C_GPIO=y
CONFIG_LMB_MAX_REGIONS=64