mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
c837dcb1a3
before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes
117 lines
3.8 KiB
C
117 lines
3.8 KiB
C
#include <asm/u-boot.h>
|
|
#include <asm/processor.h>
|
|
#include <common.h>
|
|
#include "exbitgen.h"
|
|
|
|
/* ************************************************************************ */
|
|
int board_early_init_f (void)
|
|
/* ------------------------------------------------------------------------ --
|
|
* Purpose :
|
|
* Remarks :
|
|
* Restrictions:
|
|
* See also :
|
|
* Example :
|
|
* ************************************************************************ */
|
|
{
|
|
unsigned long i;
|
|
|
|
/*-------------------------------------------------------------------------+
|
|
| Interrupt controller setup for the Walnut board.
|
|
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
| IRQ 16 405GP internally generated; active low; level sensitive
|
|
| IRQ 17-24 RESERVED
|
|
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
|
|
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
|
|
| IRQ 27 (EXT IRQ 2) Not Used
|
|
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
|
|
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
|
|
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
|
|
| Note for Walnut board:
|
|
| An interrupt taken for the FPGA (IRQ 25) indicates that either
|
|
| the Mouse, Keyboard, IRDA, or External Expansion caused the
|
|
| interrupt. The FPGA must be read to determine which device
|
|
| caused the interrupt. The default setting of the FPGA clears
|
|
|
|
|
+-------------------------------------------------------------------------*/
|
|
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (uicer, 0x00000000); /* disable all ints */
|
|
mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
|
|
mtdcr (uicpr, 0xFFFFFF90); /* set int polarities */
|
|
mtdcr (uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/* Perform reset of PHY connected to PPC via register in CPLD */
|
|
out8 (PHY_CTRL_ADDR, 0x2e); /* activate nRESET,FDX,F100,ANEN, enable output */
|
|
for (i = 0; i < 10000000; i++) {
|
|
;
|
|
}
|
|
out8 (PHY_CTRL_ADDR, 0x2f); /* deactivate nRESET */
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ************************************************************************ */
|
|
int checkboard (void)
|
|
/* ------------------------------------------------------------------------ --
|
|
* Purpose :
|
|
* Remarks :
|
|
* Restrictions:
|
|
* See also :
|
|
* Example :
|
|
* ************************************************************************ */
|
|
{
|
|
printf ("Exbit H/W id: %d\n", in8 (HW_ID_ADDR));
|
|
return (0);
|
|
}
|
|
|
|
/* ************************************************************************ */
|
|
long int initdram (int board_type)
|
|
/* ------------------------------------------------------------------------ --
|
|
* Purpose : Determines size of mounted DRAM.
|
|
* Remarks : Size is determined by reading SDRAM configuration registers as
|
|
* set up by sdram_init.
|
|
* Restrictions:
|
|
* See also :
|
|
* Example :
|
|
* ************************************************************************ */
|
|
{
|
|
ulong tot_size;
|
|
ulong bank_size;
|
|
ulong tmp;
|
|
|
|
tot_size = 0;
|
|
|
|
mtdcr (memcfga, mem_mb0cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb1cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb2cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb3cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
return tot_size;
|
|
}
|