u-boot/include/configs/aristainetos2.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

56 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Based on:
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Configuration settings for the Freescale i.MX6DL aristainetos2 board.
*/
#ifndef __ARISTAINETOS2_CONFIG_H
#define __ARISTAINETOS2_CONFIG_H
#define CONFIG_SYS_BOARD_VERSION 2
#define CONFIG_HOSTNAME "aristainetos2"
#define CONFIG_BOARDNAME "aristainetos2"
#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONSOLE_DEV "ttymxc1"
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_SF_DEFAULT_BUS 3
#define CONFIG_SF_DEFAULT_CS 1
#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
"board_type=aristainetos2_7@1\0" \
"nor_bootdelay=-2\0" \
"mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
"mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
"-(rescue-system);gpmi-nand:-(ubi)\0" \
"addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \
"ubiargs=setenv bootargs console=${console},${baudrate} " \
"ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \
"ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \
"ubifsload ${fit_addr_r} /boot/system.itb; " \
"imi ${fit_addr_r}\0 "
#define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */
#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(1, 0)
#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 33246000
#define CONFIG_LG4573
#define CONFIG_LG4573_BUS 0
#define CONFIG_LG4573_CS 0
#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#include "aristainetos-common.h"
#endif /* __ARISTAINETOS2_CONFIG_H */