mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
100 lines
2.4 KiB
C
100 lines
2.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/gp_padctrl.h>
|
|
#include "pinmux-config-dalmore.h"
|
|
#include <i2c.h>
|
|
|
|
#define BAT_I2C_ADDRESS 0x48 /* TPS65090 charger */
|
|
#define PMU_I2C_ADDRESS 0x58 /* TPS65913 PMU */
|
|
|
|
/*
|
|
* Routine: pinmux_init
|
|
* Description: Do individual peripheral pinmux configs
|
|
*/
|
|
void pinmux_init(void)
|
|
{
|
|
pinmux_config_pingrp_table(tegra114_pinmux_set_nontristate,
|
|
ARRAY_SIZE(tegra114_pinmux_set_nontristate));
|
|
|
|
pinmux_config_pingrp_table(tegra114_pinmux_common,
|
|
ARRAY_SIZE(tegra114_pinmux_common));
|
|
|
|
pinmux_config_pingrp_table(unused_pins_lowpower,
|
|
ARRAY_SIZE(unused_pins_lowpower));
|
|
|
|
/* Initialize any non-default pad configs (APB_MISC_GP regs) */
|
|
pinmux_config_drvgrp_table(dalmore_padctrl,
|
|
ARRAY_SIZE(dalmore_padctrl));
|
|
}
|
|
|
|
#if defined(CONFIG_MMC_SDHCI_TEGRA)
|
|
/*
|
|
* Do I2C/PMU writes to bring up SD card bus power
|
|
*
|
|
*/
|
|
void board_sdmmc_voltage_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar reg, data_buffer[1];
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
|
|
if (ret) {
|
|
debug("%s: Cannot find PMIC I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* TPS65913: LDO9_VOLTAGE = 3.3V */
|
|
data_buffer[0] = 0x31;
|
|
reg = 0x61;
|
|
|
|
ret = dm_i2c_write(dev, reg, data_buffer, 1);
|
|
if (ret)
|
|
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
|
|
__func__, reg, data_buffer[0], ret);
|
|
|
|
/* TPS65913: LDO9_CTRL = Active */
|
|
data_buffer[0] = 0x01;
|
|
reg = 0x60;
|
|
|
|
ret = dm_i2c_write(dev, reg, data_buffer, 1);
|
|
if (ret)
|
|
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
|
|
__func__, reg, data_buffer[0], ret);
|
|
|
|
/* TPS65090: FET6_CTRL = enable output auto discharge, enable FET6 */
|
|
data_buffer[0] = 0x03;
|
|
reg = 0x14;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, 1, &dev);
|
|
if (ret) {
|
|
debug("%s: Cannot find charger I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
ret = dm_i2c_write(dev, reg, data_buffer, 1);
|
|
if (ret)
|
|
printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
|
|
__func__, reg, data_buffer[0], ret);
|
|
}
|
|
|
|
/*
|
|
* Routine: pin_mux_mmc
|
|
* Description: setup the MMC muxes, power rails, etc.
|
|
*/
|
|
void pin_mux_mmc(void)
|
|
{
|
|
/*
|
|
* NOTE: We don't do mmc-specific pin muxes here.
|
|
* They were done globally in pinmux_init().
|
|
*/
|
|
|
|
/* Bring up the SDIO3 power rail */
|
|
board_sdmmc_voltage_init();
|
|
}
|
|
#endif /* MMC */
|