mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
d1c3867a08
The GW5905 is single-board tablet computer based on the i.MX6 SoC with the following peripheral set: - eMMC flash (boot device) - microSD expansion - LVDS display connector for off-board 3D+1C with PWM backlight and I2C based touch controller - MIPI camera connector supporting the TRULY CM8487-B500SA-E (OV5640) - ublox EMMY-W1 WiFi/Bluetooth/NFC module (SDIO/UART) - ublox ZOE-M8Q GPS - LSM9DS1 9-DOF IMU - 1x 1-lane miniPCIe socket with USB 2.0 - Gateworks System Controller - Audio jack with TLV320AIC Audio Codec, Speaker AMP and TSA227E Headphone detect - MAX8607 3-mode LED camera flash - DECT ULE module - FUSB302 USB-C PD and ISL9238 Battery charger Signed-off-by: Tim Harvey <tharvey@gateworks.com>
278 lines
7.2 KiB
C
278 lines
7.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013 Gateworks Corporation
|
|
*
|
|
* Author: Tim Harvey <tharvey@gateworks.com>
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#include "ventana_eeprom.h"
|
|
#include "gsc.h"
|
|
|
|
/*
|
|
* The Gateworks System Controller will fail to ACK a master transaction if
|
|
* it is busy, which can occur during its 1HZ timer tick while reading ADC's.
|
|
* When this does occur, it will never be busy long enough to fail more than
|
|
* 2 back-to-back transfers. Thus we wrap i2c_read and i2c_write with
|
|
* 3 retries.
|
|
*/
|
|
int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
int retry = 3;
|
|
int n = 0;
|
|
int ret;
|
|
|
|
while (n++ < retry) {
|
|
ret = i2c_read(chip, addr, alen, buf, len);
|
|
if (!ret)
|
|
break;
|
|
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
|
|
n, ret);
|
|
if (ret != -ENODEV)
|
|
break;
|
|
mdelay(10);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
|
|
{
|
|
int retry = 3;
|
|
int n = 0;
|
|
int ret;
|
|
|
|
while (n++ < retry) {
|
|
ret = i2c_write(chip, addr, alen, buf, len);
|
|
if (!ret)
|
|
break;
|
|
debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr,
|
|
n, ret);
|
|
if (ret != -ENODEV)
|
|
break;
|
|
mdelay(10);
|
|
}
|
|
mdelay(100);
|
|
return ret;
|
|
}
|
|
|
|
static void read_hwmon(const char *name, uint reg, uint size)
|
|
{
|
|
unsigned char buf[3];
|
|
uint ui;
|
|
|
|
printf("%-8s:", name);
|
|
memset(buf, 0, sizeof(buf));
|
|
if (gsc_i2c_read(GSC_HWMON_ADDR, reg, 1, buf, size)) {
|
|
puts("fRD\n");
|
|
} else {
|
|
ui = buf[0] | (buf[1]<<8) | (buf[2]<<16);
|
|
if (size == 2 && ui > 0x8000)
|
|
ui -= 0xffff;
|
|
if (ui == 0xffffff)
|
|
puts("invalid\n");
|
|
else
|
|
printf("%d\n", ui);
|
|
}
|
|
}
|
|
|
|
int gsc_info(int verbose)
|
|
{
|
|
unsigned char buf[16];
|
|
|
|
i2c_set_bus_num(0);
|
|
if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16))
|
|
return CMD_RET_FAILURE;
|
|
|
|
printf("GSC: v%d", buf[GSC_SC_FWVER]);
|
|
printf(" 0x%04x", buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC+1]<<8);
|
|
printf(" WDT:%sabled", (buf[GSC_SC_CTRL1] & (1<<GSC_SC_CTRL1_WDEN))
|
|
? "en" : "dis");
|
|
if (buf[GSC_SC_STATUS] & (1 << GSC_SC_IRQ_WATCHDOG)) {
|
|
buf[GSC_SC_STATUS] &= ~(1 << GSC_SC_IRQ_WATCHDOG);
|
|
puts(" WDT_RESET");
|
|
gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1,
|
|
&buf[GSC_SC_STATUS], 1);
|
|
}
|
|
if (!gsc_i2c_read(GSC_HWMON_ADDR, GSC_HWMON_TEMP, 1, buf, 2)) {
|
|
int ui = buf[0] | buf[1]<<8;
|
|
if (ui > 0x8000)
|
|
ui -= 0xffff;
|
|
printf(" board temp at %dC", ui / 10);
|
|
}
|
|
puts("\n");
|
|
if (!verbose)
|
|
return CMD_RET_SUCCESS;
|
|
|
|
read_hwmon("Temp", GSC_HWMON_TEMP, 2);
|
|
read_hwmon("VIN", GSC_HWMON_VIN, 3);
|
|
read_hwmon("VBATT", GSC_HWMON_VBATT, 3);
|
|
read_hwmon("VDD_3P3", GSC_HWMON_VDD_3P3, 3);
|
|
read_hwmon("VDD_ARM", GSC_HWMON_VDD_CORE, 3);
|
|
read_hwmon("VDD_SOC", GSC_HWMON_VDD_SOC, 3);
|
|
read_hwmon("VDD_HIGH", GSC_HWMON_VDD_HIGH, 3);
|
|
read_hwmon("VDD_DDR", GSC_HWMON_VDD_DDR, 3);
|
|
read_hwmon("VDD_5P0", GSC_HWMON_VDD_5P0, 3);
|
|
if (strncasecmp((const char*) ventana_info.model, "GW553", 5))
|
|
read_hwmon("VDD_2P5", GSC_HWMON_VDD_2P5, 3);
|
|
read_hwmon("VDD_1P8", GSC_HWMON_VDD_1P8, 3);
|
|
read_hwmon("VDD_IO2", GSC_HWMON_VDD_IO2, 3);
|
|
switch (ventana_info.model[3]) {
|
|
case '1': /* GW51xx */
|
|
read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */
|
|
break;
|
|
case '2': /* GW52xx */
|
|
break;
|
|
case '3': /* GW53xx */
|
|
read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3); /* -C rev */
|
|
read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
|
|
break;
|
|
case '4': /* GW54xx */
|
|
read_hwmon("VDD_IO3", GSC_HWMON_VDD_IO4, 3); /* -C rev */
|
|
read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
|
|
break;
|
|
case '5': /* GW55xx */
|
|
break;
|
|
case '6': /* GW560x */
|
|
read_hwmon("VDD_IO4", GSC_HWMON_VDD_IO4, 3);
|
|
read_hwmon("VDD_GPS", GSC_HWMON_VDD_IO3, 3);
|
|
break;
|
|
case '9': /* GW590x */
|
|
read_hwmon("AMONBMON", GSC_HWMON_VDD_IO3, 3);
|
|
read_hwmon("BAT_VOLT", GSC_HWMON_VDD_EXT, 3);
|
|
read_hwmon("BAT_TEMP", GSC_HWMON_VDD_IO4, 2);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The Gateworks System Controller implements a boot
|
|
* watchdog (always enabled) as a workaround for IMX6 boot related
|
|
* errata such as:
|
|
* ERR005768 - no fix scheduled
|
|
* ERR006282 - fixed in silicon r1.2
|
|
* ERR007117 - fixed in silicon r1.3
|
|
* ERR007220 - fixed in silicon r1.3
|
|
* ERR007926 - no fix scheduled
|
|
* see http://cache.freescale.com/files/32bit/doc/errata/IMX6DQCE.pdf
|
|
*
|
|
* Disable the boot watchdog
|
|
*/
|
|
int gsc_boot_wd_disable(void)
|
|
{
|
|
u8 reg;
|
|
|
|
i2c_set_bus_num(CONFIG_I2C_GSC);
|
|
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) {
|
|
reg |= (1 << GSC_SC_CTRL1_WDDIS);
|
|
if (!gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
return 0;
|
|
}
|
|
puts("Error: could not disable GSC Watchdog\n");
|
|
return 1;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_GSC) && !defined(CONFIG_SPL_BUILD)
|
|
static int do_gsc_sleep(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
unsigned char reg;
|
|
unsigned long secs = 0;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
secs = simple_strtoul(argv[1], NULL, 10);
|
|
printf("GSC Sleeping for %ld seconds\n", secs);
|
|
|
|
i2c_set_bus_num(0);
|
|
reg = (secs >> 24) & 0xff;
|
|
if (gsc_i2c_write(GSC_SC_ADDR, 9, 1, ®, 1))
|
|
goto error;
|
|
reg = (secs >> 16) & 0xff;
|
|
if (gsc_i2c_write(GSC_SC_ADDR, 8, 1, ®, 1))
|
|
goto error;
|
|
reg = (secs >> 8) & 0xff;
|
|
if (gsc_i2c_write(GSC_SC_ADDR, 7, 1, ®, 1))
|
|
goto error;
|
|
reg = secs & 0xff;
|
|
if (gsc_i2c_write(GSC_SC_ADDR, 6, 1, ®, 1))
|
|
goto error;
|
|
if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
goto error;
|
|
reg |= (1 << 2);
|
|
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
goto error;
|
|
reg &= ~(1 << 2);
|
|
reg |= 0x3;
|
|
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
goto error;
|
|
|
|
return CMD_RET_SUCCESS;
|
|
|
|
error:
|
|
printf("i2c error\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
static int do_gsc_wd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
unsigned char reg;
|
|
|
|
if (argc < 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
if (strcasecmp(argv[1], "enable") == 0) {
|
|
int timeout = 0;
|
|
|
|
if (argc > 2)
|
|
timeout = simple_strtoul(argv[2], NULL, 10);
|
|
i2c_set_bus_num(0);
|
|
if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
return CMD_RET_FAILURE;
|
|
reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME));
|
|
if (timeout == 60)
|
|
reg |= (1 << GSC_SC_CTRL1_WDTIME);
|
|
else
|
|
timeout = 30;
|
|
reg |= (1 << GSC_SC_CTRL1_WDEN);
|
|
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
return CMD_RET_FAILURE;
|
|
printf("GSC Watchdog enabled with timeout=%d seconds\n",
|
|
timeout);
|
|
} else if (strcasecmp(argv[1], "disable") == 0) {
|
|
i2c_set_bus_num(0);
|
|
if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
return CMD_RET_FAILURE;
|
|
reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME));
|
|
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1))
|
|
return CMD_RET_FAILURE;
|
|
printf("GSC Watchdog disabled\n");
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (argc < 2)
|
|
return gsc_info(1);
|
|
|
|
if (strcasecmp(argv[1], "wd") == 0)
|
|
return do_gsc_wd(cmdtp, flag, --argc, ++argv);
|
|
else if (strcasecmp(argv[1], "sleep") == 0)
|
|
return do_gsc_sleep(cmdtp, flag, --argc, ++argv);
|
|
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
gsc, 4, 1, do_gsc, "GSC configuration",
|
|
"[wd enable [30|60]]|[wd disable]|[sleep <secs>]\n"
|
|
);
|
|
|
|
#endif /* CONFIG_CMD_GSC */
|