u-boot/cmd/fpga.c
Michal Simek 5cf22289ae fpga: Use enum for bitstream command types
Using enum simplify handling of different bitstream command
types.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10 10:21:59 +01:00

378 lines
9 KiB
C

/*
* (C) Copyright 2000, 2001
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* FPGA support
*/
#include <common.h>
#include <command.h>
#include <fpga.h>
#include <fs.h>
#include <malloc.h>
/* Local functions */
static int fpga_get_op(char *opstr);
/* Local defines */
enum {
FPGA_NONE = -1,
FPGA_INFO,
FPGA_LOAD,
FPGA_LOADB,
FPGA_DUMP,
FPGA_LOADMK,
FPGA_LOADP,
FPGA_LOADBP,
FPGA_LOADFS,
};
/* ------------------------------------------------------------------------- */
/* command form:
* fpga <op> <device number> <data addr> <datasize>
* where op is 'load', 'dump', or 'info'
* If there is no device number field, the fpga environment variable is used.
* If there is no data addr field, the fpgadata environment variable is used.
* The info command requires no data address field.
*/
int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int op, dev = FPGA_INVALID_DEVICE;
size_t data_size = 0;
void *fpga_data = NULL;
char *devstr = getenv("fpga");
char *datastr = getenv("fpgadata");
int rc = FPGA_FAIL;
int wrong_parms = 0;
#if defined(CONFIG_FIT)
const char *fit_uname = NULL;
ulong fit_addr;
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
fpga_fs_info fpga_fsinfo;
fpga_fsinfo.fstype = FS_TYPE_ANY;
#endif
if (devstr)
dev = (int) simple_strtoul(devstr, NULL, 16);
if (datastr)
fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
switch (argc) {
#if defined(CONFIG_CMD_FPGA_LOADFS)
case 9:
fpga_fsinfo.blocksize = (unsigned int)
simple_strtoul(argv[5], NULL, 16);
fpga_fsinfo.interface = argv[6];
fpga_fsinfo.dev_part = argv[7];
fpga_fsinfo.filename = argv[8];
#endif
case 5: /* fpga <op> <dev> <data> <datasize> */
data_size = simple_strtoul(argv[4], NULL, 16);
case 4: /* fpga <op> <dev> <data> */
#if defined(CONFIG_FIT)
if (fit_parse_subimage(argv[3], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image ",
fit_uname);
debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
fpga_data = (void *)simple_strtoul(argv[3], NULL, 16);
debug("* fpga: cmdline image address = 0x%08lx\n",
(ulong)fpga_data);
}
debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
case 3: /* fpga <op> <dev | data addr> */
dev = (int)simple_strtoul(argv[2], NULL, 16);
debug("%s: device = %d\n", __func__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count())) {
/* must be buffer ptr */
debug("%s: Assuming buffer pointer in arg 3\n",
__func__);
#if defined(CONFIG_FIT)
if (fit_parse_subimage(argv[2], (ulong)fpga_data,
&fit_addr, &fit_uname)) {
fpga_data = (void *)fit_addr;
debug("* fpga: subimage '%s' from FIT image ",
fit_uname);
debug("at 0x%08lx\n", fit_addr);
} else
#endif
{
fpga_data = (void *)(uintptr_t)dev;
debug("* fpga: cmdline image addr = 0x%08lx\n",
(ulong)fpga_data);
}
debug("%s: fpga_data = 0x%lx\n",
__func__, (ulong)fpga_data);
dev = FPGA_INVALID_DEVICE; /* reset device num */
}
case 2: /* fpga <op> */
op = (int)fpga_get_op(argv[1]);
break;
default:
debug("%s: Too many or too few args (%d)\n", __func__, argc);
op = FPGA_NONE; /* force usage display */
break;
}
if (dev == FPGA_INVALID_DEVICE) {
puts("FPGA device not specified\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
case FPGA_INFO:
break;
#if defined(CONFIG_CMD_FPGA_LOADFS)
case FPGA_LOADFS:
/* Blocksize can be zero */
if (!fpga_fsinfo.interface || !fpga_fsinfo.dev_part ||
!fpga_fsinfo.filename)
wrong_parms = 1;
#endif
case FPGA_LOAD:
case FPGA_LOADP:
case FPGA_LOADB:
case FPGA_LOADBP:
case FPGA_DUMP:
if (!fpga_data || !data_size)
wrong_parms = 1;
break;
#if defined(CONFIG_CMD_FPGA_LOADMK)
case FPGA_LOADMK:
if (!fpga_data)
wrong_parms = 1;
break;
#endif
}
if (wrong_parms) {
puts("Wrong parameters for FPGA request\n");
op = FPGA_NONE;
}
switch (op) {
case FPGA_NONE:
return CMD_RET_USAGE;
case FPGA_INFO:
rc = fpga_info(dev);
break;
case FPGA_LOAD:
rc = fpga_load(dev, fpga_data, data_size, BIT_FULL);
break;
#if defined(CONFIG_CMD_FPGA_LOADP)
case FPGA_LOADP:
rc = fpga_load(dev, fpga_data, data_size, BIT_PARTIAL);
break;
#endif
case FPGA_LOADB:
rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_FULL);
break;
#if defined(CONFIG_CMD_FPGA_LOADBP)
case FPGA_LOADBP:
rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_PARTIAL);
break;
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
case FPGA_LOADFS:
rc = fpga_fsload(dev, fpga_data, data_size, &fpga_fsinfo);
break;
#endif
#if defined(CONFIG_CMD_FPGA_LOADMK)
case FPGA_LOADMK:
switch (genimg_get_format(fpga_data)) {
#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
case IMAGE_FORMAT_LEGACY:
{
image_header_t *hdr =
(image_header_t *)fpga_data;
ulong data;
uint8_t comp;
comp = image_get_comp(hdr);
if (comp == IH_COMP_GZIP) {
#if defined(CONFIG_GZIP)
ulong image_buf = image_get_data(hdr);
data = image_get_load(hdr);
ulong image_size = ~0UL;
if (gunzip((void *)data, ~0UL,
(void *)image_buf,
&image_size) != 0) {
puts("GUNZIP: error\n");
return 1;
}
data_size = image_size;
#else
puts("Gunzip image is not supported\n");
return 1;
#endif
} else {
data = (ulong)image_get_data(hdr);
data_size = image_get_data_size(hdr);
}
rc = fpga_load(dev, (void *)data, data_size,
BIT_FULL);
}
break;
#endif
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
{
const void *fit_hdr = (const void *)fpga_data;
int noffset;
const void *fit_data;
if (fit_uname == NULL) {
puts("No FIT subimage unit name\n");
return 1;
}
if (!fit_check_format(fit_hdr)) {
puts("Bad FIT image format\n");
return 1;
}
/* get fpga component image node offset */
noffset = fit_image_get_node(fit_hdr,
fit_uname);
if (noffset < 0) {
printf("Can't find '%s' FIT subimage\n",
fit_uname);
return 1;
}
/* verify integrity */
if (!fit_image_verify(fit_hdr, noffset)) {
puts ("Bad Data Hash\n");
return 1;
}
/* get fpga subimage data address and length */
if (fit_image_get_data(fit_hdr, noffset,
&fit_data, &data_size)) {
puts("Fpga subimage data not found\n");
return 1;
}
rc = fpga_load(dev, fit_data, data_size,
BIT_FULL);
}
break;
#endif
default:
puts("** Unknown image type\n");
rc = FPGA_FAIL;
break;
}
break;
#endif
case FPGA_DUMP:
rc = fpga_dump(dev, fpga_data, data_size);
break;
default:
printf("Unknown operation\n");
return CMD_RET_USAGE;
}
return rc;
}
/*
* Map op to supported operations. We don't use a table since we
* would just have to relocate it from flash anyway.
*/
static int fpga_get_op(char *opstr)
{
int op = FPGA_NONE;
if (!strcmp("info", opstr))
op = FPGA_INFO;
else if (!strcmp("loadb", opstr))
op = FPGA_LOADB;
else if (!strcmp("load", opstr))
op = FPGA_LOAD;
#if defined(CONFIG_CMD_FPGA_LOADP)
else if (!strcmp("loadp", opstr))
op = FPGA_LOADP;
#endif
#if defined(CONFIG_CMD_FPGA_LOADBP)
else if (!strcmp("loadbp", opstr))
op = FPGA_LOADBP;
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
else if (!strcmp("loadfs", opstr))
op = FPGA_LOADFS;
#endif
#if defined(CONFIG_CMD_FPGA_LOADMK)
else if (!strcmp("loadmk", opstr))
op = FPGA_LOADMK;
#endif
else if (!strcmp("dump", opstr))
op = FPGA_DUMP;
if (op == FPGA_NONE)
printf("Unknown fpga operation \"%s\"\n", opstr);
return op;
}
#if defined(CONFIG_CMD_FPGA_LOADFS)
U_BOOT_CMD(fpga, 9, 1, do_fpga,
#else
U_BOOT_CMD(fpga, 6, 1, do_fpga,
#endif
"loadable FPGA image support",
"[operation type] [device number] [image address] [image size]\n"
"fpga operations:\n"
" dump\t[dev] [address] [size]\tLoad device to memory buffer\n"
" info\t[dev]\t\t\tlist known device information\n"
" load\t[dev] [address] [size]\tLoad device from memory buffer\n"
#if defined(CONFIG_CMD_FPGA_LOADP)
" loadp\t[dev] [address] [size]\t"
"Load device from memory buffer with partial bitstream\n"
#endif
" loadb\t[dev] [address] [size]\t"
"Load device from bitstream buffer (Xilinx only)\n"
#if defined(CONFIG_CMD_FPGA_LOADBP)
" loadbp\t[dev] [address] [size]\t"
"Load device from bitstream buffer with partial bitstream"
"(Xilinx only)\n"
#endif
#if defined(CONFIG_CMD_FPGA_LOADFS)
"Load device from filesystem (FAT by default) (Xilinx only)\n"
" loadfs [dev] [address] [image size] [blocksize] <interface>\n"
" [<dev[:part]>] <filename>\n"
#endif
#if defined(CONFIG_CMD_FPGA_LOADMK)
" loadmk [dev] [address]\tLoad device generated with mkimage"
#if defined(CONFIG_FIT)
"\n"
"\tFor loadmk operating on FIT format uImage address must include\n"
"\tsubimage unit name in the form of addr:<subimg_uname>"
#endif
#endif
);