mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
037bb6e2ca
Remap PCI I/O space to the bus address 0x0 in the Armada 37xx device-tree in order to support legacy I/O port based cards which have hardcoded I/O ports in low address space. Some legacy PCI I/O based cards do not support 32-bit I/O addressing. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
524 lines
12 KiB
Text
524 lines
12 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 37xx family of SoCs.
|
|
*
|
|
* Copyright (C) 2016 Marvell
|
|
*
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Marvell Armada 37xx SoC";
|
|
compatible = "marvell,armada3700";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/*
|
|
* The PSCI firmware region depicted below is the default one
|
|
* and should be updated by the bootloader.
|
|
*/
|
|
psci-area@4000000 {
|
|
reg = <0 0x4000000 0 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53";
|
|
reg = <0>;
|
|
clocks = <&nb_periph_clk 16>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
internal-regs@d0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
/* 32M internal register @ 0xd000_0000 */
|
|
ranges = <0x0 0x0 0xd0000000 0x2000000>;
|
|
|
|
wdt: watchdog@8300 {
|
|
compatible = "marvell,armada-3700-wdt";
|
|
reg = <0x8300 0x40>;
|
|
marvell,system-controller = <&cpu_misc>;
|
|
clocks = <&xtalclk>;
|
|
};
|
|
|
|
cpu_misc: system-controller@d000 {
|
|
compatible = "marvell,armada-3700-cpu-misc",
|
|
"syscon";
|
|
reg = <0xd000 0x1000>;
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
compatible = "marvell,armada-3700-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x10600 0xA00>;
|
|
clocks = <&nb_periph_clk 7>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-cs = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,armada-3700-i2c";
|
|
reg = <0x11000 0x24>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&nb_periph_clk 10>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
mrvl,i2c-fast-mode;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11080 {
|
|
compatible = "marvell,armada-3700-i2c";
|
|
reg = <0x11080 0x24>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&nb_periph_clk 9>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
mrvl,i2c-fast-mode;
|
|
status = "disabled";
|
|
};
|
|
|
|
avs: avs@11500 {
|
|
compatible = "marvell,armada-3700-avs",
|
|
"syscon";
|
|
reg = <0x11500 0x40>;
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "marvell,armada-3700-uart";
|
|
reg = <0x12000 0x18>;
|
|
clocks = <&xtalclk>;
|
|
interrupts =
|
|
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "uart-sum", "uart-tx", "uart-rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12200 {
|
|
compatible = "marvell,armada-3700-uart-ext";
|
|
reg = <0x12200 0x30>;
|
|
clocks = <&xtalclk>;
|
|
interrupts =
|
|
<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "uart-tx", "uart-rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
nb_periph_clk: nb-periph-clk@13000 {
|
|
compatible = "marvell,armada-3700-periph-clock-nb",
|
|
"syscon";
|
|
reg = <0x13000 0x100>;
|
|
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
|
|
<&tbg 3>, <&xtalclk>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sb_periph_clk: sb-periph-clk@18000 {
|
|
compatible = "marvell,armada-3700-periph-clock-sb";
|
|
reg = <0x18000 0x100>;
|
|
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
|
|
<&tbg 3>, <&xtalclk>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
tbg: tbg@13200 {
|
|
compatible = "marvell,armada-3700-tbg-clock";
|
|
reg = <0x13200 0x100>;
|
|
clocks = <&xtalclk>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pinctrl_nb: pinctrl@13800 {
|
|
compatible = "marvell,armada3710-nb-pinctrl",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x13800 0x100>, <0x13C00 0x20>;
|
|
/* MPP1[19:0] */
|
|
gpionb: gpio {
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_nb 0 0 36>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts =
|
|
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
xtalclk: xtal-clk {
|
|
compatible = "marvell,armada-3700-xtal-clock";
|
|
clock-output-names = "xtal";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
spi_quad_pins: spi-quad-pins {
|
|
groups = "spi_quad";
|
|
function = "spi";
|
|
};
|
|
|
|
spi_cs1_pins: spi-cs1-pins {
|
|
groups = "spi_cs1";
|
|
function = "spi";
|
|
};
|
|
|
|
i2c1_pins: i2c1-pins {
|
|
groups = "i2c1";
|
|
function = "i2c";
|
|
};
|
|
|
|
i2c2_pins: i2c2-pins {
|
|
groups = "i2c2";
|
|
function = "i2c";
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
groups = "uart1";
|
|
function = "uart";
|
|
};
|
|
|
|
uart2_pins: uart2-pins {
|
|
groups = "uart2";
|
|
function = "uart";
|
|
};
|
|
|
|
mmc_pins: mmc-pins {
|
|
groups = "emmc_nb";
|
|
function = "emmc";
|
|
};
|
|
};
|
|
|
|
nb_pm: syscon@14000 {
|
|
compatible = "marvell,armada-3700-nb-pm",
|
|
"syscon";
|
|
reg = <0x14000 0x60>;
|
|
};
|
|
|
|
comphy: phy@18300 {
|
|
compatible = "marvell,comphy-a3700";
|
|
reg = <0x18300 0x300>,
|
|
<0x1F000 0x400>,
|
|
<0x5C000 0x400>,
|
|
<0xe0178 0x8>;
|
|
reg-names = "comphy",
|
|
"lane1_pcie_gbe",
|
|
"lane0_usb3_gbe",
|
|
"lane2_sata_usb3";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&xtalclk>;
|
|
clock-names = "xtal";
|
|
|
|
comphy0: phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy1: phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
comphy2: phy@2 {
|
|
reg = <2>;
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|
|
|
|
pinctrl_sb: pinctrl@18800 {
|
|
compatible = "marvell,armada3710-sb-pinctrl",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x18800 0x100>, <0x18C00 0x20>;
|
|
/* MPP2[23:0] */
|
|
gpiosb: gpio {
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl_sb 0 0 30>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts =
|
|
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
rgmii_pins: mii-pins {
|
|
groups = "rgmii";
|
|
function = "mii";
|
|
};
|
|
|
|
smi_pins: smi-pins {
|
|
groups = "smi";
|
|
function = "smi";
|
|
};
|
|
|
|
sdio_pins: sdio-pins {
|
|
groups = "sdio_sb";
|
|
function = "sdio";
|
|
};
|
|
|
|
pcie_reset_pins: pcie-reset-pins {
|
|
groups = "pcie1"; /* this actually controls "pcie1_reset" */
|
|
function = "gpio";
|
|
};
|
|
|
|
pcie_clkreq_pins: pcie-clkreq-pins {
|
|
groups = "pcie1_clkreq";
|
|
function = "pcie";
|
|
};
|
|
};
|
|
|
|
eth0: ethernet@30000 {
|
|
compatible = "marvell,armada-3700-neta";
|
|
reg = <0x30000 0x4000>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sb_periph_clk 8>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio: mdio@32004 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0x32004 0x4>;
|
|
};
|
|
|
|
eth1: ethernet@40000 {
|
|
compatible = "marvell,armada-3700-neta";
|
|
reg = <0x40000 0x4000>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sb_periph_clk 7>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3: usb@58000 {
|
|
compatible = "marvell,armada3700-xhci",
|
|
"generic-xhci";
|
|
reg = <0x58000 0x4000>;
|
|
marvell,usb-misc-reg = <&usb32_syscon>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sb_periph_clk 12>;
|
|
phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
|
|
phy-names = "usb3-phy", "usb2-utmi-otg-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2_utmi_otg_phy: phy@5d000 {
|
|
compatible = "marvell,a3700-utmi-otg-phy";
|
|
reg = <0x5d000 0x800>;
|
|
marvell,usb-misc-reg = <&usb32_syscon>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb32_syscon: system-controller@5d800 {
|
|
compatible = "marvell,armada-3700-usb2-host-device-misc",
|
|
"syscon";
|
|
reg = <0x5d800 0x800>;
|
|
};
|
|
|
|
usb2: usb@5e000 {
|
|
compatible = "marvell,armada-3700-ehci";
|
|
reg = <0x5e000 0x1000>;
|
|
marvell,usb-misc-reg = <&usb2_syscon>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&usb2_utmi_host_phy>;
|
|
phy-names = "usb2-utmi-host-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2_utmi_host_phy: phy@5f000 {
|
|
compatible = "marvell,a3700-utmi-host-phy";
|
|
reg = <0x5f000 0x800>;
|
|
marvell,usb-misc-reg = <&usb2_syscon>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
usb2_syscon: system-controller@5f800 {
|
|
compatible = "marvell,armada-3700-usb2-host-misc",
|
|
"syscon";
|
|
reg = <0x5f800 0x800>;
|
|
};
|
|
|
|
xor@60900 {
|
|
compatible = "marvell,armada-3700-xor";
|
|
reg = <0x60900 0x100>,
|
|
<0x60b00 0x100>;
|
|
|
|
xor10 {
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
xor11 {
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
crypto: crypto@90000 {
|
|
compatible = "inside-secure,safexcel-eip97ies";
|
|
reg = <0x90000 0x20000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mem", "ring0", "ring1",
|
|
"ring2", "ring3", "eip";
|
|
clocks = <&nb_periph_clk 15>;
|
|
};
|
|
|
|
rwtm: mailbox@b0000 {
|
|
compatible = "marvell,armada-3700-rwtm-mailbox";
|
|
reg = <0xb0000 0x100>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
sdhci1: sdhci@d0000 {
|
|
compatible = "marvell,armada-3700-sdhci",
|
|
"marvell,sdhci-xenon";
|
|
reg = <0xd0000 0x300>,
|
|
<0x1e808 0x4>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&nb_periph_clk 0>;
|
|
clock-names = "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci0: sdhci@d8000 {
|
|
compatible = "marvell,armada-3700-sdhci",
|
|
"marvell,sdhci-xenon";
|
|
reg = <0xd8000 0x300>,
|
|
<0x17808 0x4>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&nb_periph_clk 0>;
|
|
clock-names = "core";
|
|
status = "disabled";
|
|
};
|
|
|
|
sata: sata@e0000 {
|
|
compatible = "marvell,armada-3700-ahci";
|
|
reg = <0xe0000 0x178>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&nb_periph_clk 1>;
|
|
phys = <&comphy2 0>;
|
|
phy-names = "sata-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@1d00000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x1d00000 0x10000>, /* GICD */
|
|
<0x1d40000 0x40000>, /* GICR */
|
|
<0x1d80000 0x2000>, /* GICC */
|
|
<0x1d90000 0x2000>, /* GICH */
|
|
<0x1da0000 0x20000>; /* GICV */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
pcie0: pcie@d0070000 {
|
|
compatible = "marvell,armada-3700-pcie";
|
|
device_type = "pci";
|
|
status = "disabled";
|
|
reg = <0 0xd0070000 0 0x20000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <1>;
|
|
msi-parent = <&pcie0>;
|
|
msi-controller;
|
|
/*
|
|
* The 128 MiB address range [0xe8000000-0xf0000000] is
|
|
* dedicated for PCIe and can be assigned to 8 windows
|
|
* with size a power of two. Use one 1 MiB window for
|
|
* IO at the end and the remaining seven windows
|
|
* (totaling 127 MiB) for MEM.
|
|
*/
|
|
ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */
|
|
0x81000000 0 0x00000000 0 0xeff00000 0 0x00100000>; /* Port 0 IO */
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc 0>,
|
|
<0 0 0 2 &pcie_intc 1>,
|
|
<0 0 0 3 &pcie_intc 2>,
|
|
<0 0 0 4 &pcie_intc 3>;
|
|
max-link-speed = <2>;
|
|
phys = <&comphy1 0>;
|
|
pcie_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
armada-3700-rwtm {
|
|
compatible = "marvell,armada-3700-rwtm-firmware";
|
|
mboxes = <&rwtm 0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|