u-boot/arch/arm/dts/am335x-sancloud-bbe-extended-wifi.dts
Paul Barker 1d49b8d73b arm: dts: Resync dts for BeagleBone and derivatives
Sync BeagleBone dts files & TPS dtsi files with Linux v5.17 and include
the SanCloud BBE Extended WiFi dts added in v5.18-rc1. Also pull in
changes to am33xx-l4.dtsi needed to support the BeagleBone Blue.

The change to use the cpsw switch driver (commit c477358e66a3 in Linux)
is excluded from the sync as u-boot does not recognise the new
compatible string.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
2022-04-21 09:08:57 -04:00

113 lines
2.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2021 Sancloud Ltd
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"
#include "am335x-sancloud-bbe-common.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "SanCloud BeagleBone Enhanced Extended WiFi";
compatible = "sancloud,am335x-boneenhanced",
"ti,am335x-bone-black",
"ti,am335x-bone",
"ti,am33xx";
wlan_en_reg: fixedregulator@2 {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us= <100000>;
};
};
&am33xx_pinmux {
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
/* gpmc_a9.gpio1_25: RADIO_EN */
AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
/* gpmc_ad12.mmc2_dat0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad13.mmc2_dat1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad14.mmc2_dat2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad15.mmc2_dat3 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_csn3.mmc2_cmd */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_clk.mmc2_clk */
AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
>;
};
bluetooth_pins: pinmux_bluetooth_pins {
pinctrl-single,pins = <
/* event_intr0.gpio0_19 */
AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
/* uart1_rxd */
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
/* uart1_txd */
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
/* uart1_ctsn */
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* uart1_rtsn */
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
&i2c2 {
status = "disabled";
};
&mmc3 {
status = "okay";
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
non-removable;
cap-power-off-card;
ti,needs-special-hs-handling;
keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
dmas = <&edma_xbar 12 0 1
&edma_xbar 13 0 2>;
dma-names = "tx", "rx";
clock-frequency = <50000000>;
max-frequency = <50000000>;
};
&uart1 {
status = "okay";
bluetooth {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins &bluetooth_pins>;
compatible = "qcom,qca6174-bt";
enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
interrupt-parent = <&gpio0>;
interrupts = <19 IRQ_TYPE_EDGE_RISING>;
};
};