mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 22:13:08 +00:00
181bd9dc61
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
244 lines
7.1 KiB
C
244 lines
7.1 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* (C) Copyright 2010
|
|
* Achim Ehrlich <aehrlich@taskit.de>
|
|
* taskit GmbH <www.taskit.de>
|
|
*
|
|
* (C) Copyright 2012
|
|
* Markus Hubig <mhubig@imko.de>
|
|
* IMKO GmbH <www.imko.de>
|
|
*
|
|
* Configuation settings for the stamp9g20 CPU module.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
/*
|
|
* Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
|
|
* program. Since the linker has to swallow that define, we must use a pure
|
|
* hex number here!
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x23f00000
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */
|
|
|
|
/* misc settings */
|
|
#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */
|
|
#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */
|
|
#define CONFIG_INITRD_TAG /* pass initrd param to kernel */
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
|
|
#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */
|
|
#define CONFIG_BOARD_POSTCLK_INIT /* call board_postclk_init() */
|
|
#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */
|
|
|
|
/* setting board specific options */
|
|
#ifdef CONFIG_PORTUXG20
|
|
# define CONFIG_MACH_TYPE MACH_TYPE_PORTUXG20
|
|
# define CONFIG_MACB
|
|
#else
|
|
# define CONFIG_MACH_TYPE MACH_TYPE_STAMP9G20
|
|
#endif
|
|
|
|
/*
|
|
* SDRAM: 1 bank, 64 MB, base address 0x20000000
|
|
* Already initialized before u-boot gets started.
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
|
#define CONFIG_SYS_SDRAM_SIZE (64 << 20)
|
|
|
|
/*
|
|
* Perform a SDRAM Memtest from the start of SDRAM
|
|
* till the beginning of the U-Boot position in RAM.
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN \
|
|
ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000)
|
|
|
|
/*
|
|
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
|
* leaving the correct space for initial global data structure above that
|
|
* address while providing maximum stack area below.
|
|
*/
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* NAND flash settings */
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
|
#define CONFIG_SYS_NAND_DBW_8
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
|
|
|
/* general purpose I/O */
|
|
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
|
#define CONFIG_AT91_GPIO /* enable the GPIO features */
|
|
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* LED configuration */
|
|
#define CONFIG_STATUS_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
|
|
/* The LED PINs */
|
|
#define CONFIG_RED_LED AT91_PIN_PC5
|
|
#define CONFIG_GREEN_LED AT91_PIN_PC4
|
|
#define CONFIG_YELLOW_LED AT91_PIN_PC10
|
|
|
|
#define STATUS_LED_RED 0
|
|
#define STATUS_LED_GREEN 1
|
|
#define STATUS_LED_YELLOW 2
|
|
|
|
/* Red LED */
|
|
#define STATUS_LED_BIT STATUS_LED_RED
|
|
#define STATUS_LED_STATE STATUS_LED_OFF
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
|
|
/* Green LED */
|
|
#define STATUS_LED_BIT1 STATUS_LED_GREEN
|
|
#define STATUS_LED_STATE1 STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
|
|
|
|
/* Yellow LED */
|
|
#define STATUS_LED_BIT2 STATUS_LED_YELLOW
|
|
#define STATUS_LED_STATE2 STATUS_LED_OFF
|
|
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2)
|
|
|
|
/* Boot status LED */
|
|
#define STATUS_LED_BOOT STATUS_LED_GREEN
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*
|
|
* PortuxG20 has always ethernet but for Stamp9G20 you
|
|
* can enable it here if your baseboard features ethernet.
|
|
*/
|
|
|
|
#define CONFIG_MACB
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_USB_ETHER_MCS7830
|
|
|
|
#ifdef CONFIG_MACB
|
|
# define CONFIG_RMII /* use reduced MII inteface */
|
|
# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */
|
|
#define CONFIG_AT91_WANTS_COMMON_PHY
|
|
|
|
/* BOOTP and DHCP options */
|
|
# define CONFIG_BOOTP_BOOTFILESIZE
|
|
# define CONFIG_BOOTP_BOOTPATH
|
|
# define CONFIG_BOOTP_GATEWAY
|
|
# define CONFIG_BOOTP_HOSTNAME
|
|
# define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv autoload yes; setenv autoboot yes; " \
|
|
"setenv bootargs ${basicargs} ${mtdparts} " \
|
|
"root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \
|
|
"dhcp"
|
|
#endif /* CONFIG_MACB */
|
|
|
|
/* Enable the watchdog */
|
|
#define CONFIG_AT91SAM9_WATCHDOG
|
|
#define CONFIG_HW_WATCHDOG
|
|
|
|
/* USB configuration */
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
|
|
/* General Boot Parameter */
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTCOMMAND "run flashboot"
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
/*
|
|
* RAM Memory address where to put the
|
|
* Linux Kernel befor starting.
|
|
*/
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000
|
|
|
|
/*
|
|
* The NAND Flash partitions:
|
|
* ==========================================
|
|
* 0x0000000-0x001ffff -> 128k, bootstrap
|
|
* 0x0020000-0x005ffff -> 256k, u-boot
|
|
* 0x0060000-0x007ffff -> 128k, env1
|
|
* 0x0080000-0x009ffff -> 128k, env2 (backup)
|
|
* 0x0100000-0x06fffff -> 6M, kernel
|
|
* 0x0700000-0x8000000 -> 121M, RootFS
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET ((128 + 256) << 10)
|
|
#define CONFIG_ENV_OFFSET_REDUND ((128 + 256 + 128) << 10)
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
|
|
|
/*
|
|
* Predefined environment variables.
|
|
* Usefull to define some easy to use boot commands.
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
\
|
|
"basicargs=console=ttyS0,115200\0" \
|
|
\
|
|
"mtdparts=mtdparts=atmel_nand:128k(bootstrap)ro," \
|
|
"256k(uboot)ro,128k(env1)ro," \
|
|
"128k(env2)ro,6M(linux),-(root)rw\0" \
|
|
\
|
|
"flashboot=setenv bootargs ${basicargs} ${mtdparts} " \
|
|
"root=/dev/mtdblock5 rootfstype=jffs2; " \
|
|
"nand read 0x22000000 0x100000 0x600000; " \
|
|
"bootm 22000000\0" \
|
|
\
|
|
"sdboot=setenv bootargs ${basicargs} ${mtdparts} " \
|
|
"root=/dev/mmcblk0p1 rootwait; " \
|
|
"nand read 0x22000000 0x100000 0x600000; " \
|
|
"bootm 22000000"
|
|
|
|
/* Command line & features configuration */
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_LED
|
|
|
|
#ifdef CONFIG_MACB
|
|
# define CONFIG_CMD_PING
|
|
# define CONFIG_CMD_DHCP
|
|
#endif /* CONFIG_MACB */
|
|
|
|
#endif /* __CONFIG_H */
|