mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-28 05:53:54 +00:00
f33abe39fd
Use the same DCD settings from Congatec's U-boot tree for the P/N 016113 card. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> |
||
|---|---|---|
| .. | ||
| cgtqmx6eval.c | ||
| imximage.cfg | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
U-Boot for the Congatec Conga-QEVAl Evaluation Carrier board with qmx6 quad module. This file contains information for the port of U-Boot to the Congatec Conga-QEVAl Evaluation Carrier board with qmx6 quad module. 1. Boot source, boot from SD card --------------------------------- By default, the Congatec board can boot only from the SPI-NOR. But, with the u-boot version provided with the board you can write boot registers to force the board to reboot and boot from the SD slot. If "bmode" command is not available from your pre-installed u-boot, these instruction will produce the same effect: conga-QMX6 U-Boot > mw.l 0x20d8040 0x3850 conga-QMX6 U-Boot > mw.l 0x020d8044 0x10000000 conga-QMX6 U-Boot > reset resetting ... The the board will reboot and, if you have written your SD correctly the board will use u-boot that live into the SD To copy the resulting u-boot.imx to the SD card: dd if=u-boot.imx of=/dev/xxx bs=512 seek=2 Note: Replace xxx with the device representing the SD card in your system.