u-boot/drivers/mtd/spi
Patrice Chotard 3feea0ba19 spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.

To sum-up:
 - Previous call tree was:
    spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

 - Current call tree is:
    spi_flash_probe() -> _spi_get_bus_and_cs()
    spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()

This patch impacts the following :
  - cmd/sf.c: if spi mode and/or speed is passed in argument of
    do_spi_flash_probe(), call spi_flash_probe() otherwise call
    spi_flash_probe_bus_cs().

  - drivers/net/fm/fm.c: as by default spi speed and mode was set to
    0 and a comment indicates that speed and mode are read from DT,
    use spi_flash_probe_bus_cs().

  - drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
    from DT by all platforms using this driver, so keep legacy and replace
    spi_flash_probe_bus_cs() by spi_flash_probe();

  - drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
    so replace spi_flash_probe_bus_cs() by spi_flash_probe().

  - drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
    usage of this driver, nevertheless, keep legacy and replace
    spi_get_bus_and_cs() by _spi_get_bus_and_cs().

  - env/sf.c: a comment indicates that speed and mode are read
    from DT. So use spi_flash_probe_bus_cs().

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Cc: Marek Behun <marek.behun@nic.cz>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefan Roese <sr@denx.de>
Cc: "Pali Rohár" <pali@kernel.org>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Anji J <anji.jagarlmudi@nxp.com>
Cc: Biwen Li <biwen.li@nxp.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
2022-05-23 09:33:10 -04:00
..
fsl_espi_spl.c common: Move hang() to the same header as panic() 2020-01-17 17:53:40 -05:00
Kconfig - disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs 2022-01-09 07:56:31 -05:00
Makefile spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL 2020-08-03 22:19:54 -04:00
sandbox.c dm: Avoid accessing seq directly 2020-12-18 20:32:21 -07:00
sf-uclass.c spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode 2022-05-23 09:33:10 -04:00
sf_dataflash.c sf: dataflash: add support for AT45DB641E 2022-05-03 17:57:19 +05:30
sf_internal.h mtd: spi-nor-core: Add support for DTR protocol 2021-06-28 12:00:32 +05:30
sf_mtd.c mtd: Remove mtd_erase_callback() entirely 2021-10-23 15:47:33 +05:30
sf_probe.c mtd: spi-nor-core: Perform a Soft Reset on shutdown 2021-06-28 12:04:53 +05:30
spi-nor-core.c spi: Avoid checking console in SPL 2022-04-06 14:01:42 -04:00
spi-nor-ids.c mtd: spi-nor-ids: add Macronix mx25u51245g flash entry 2022-05-03 17:37:39 +05:30
spi-nor-tiny.c mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t 2021-06-29 19:16:54 +05:30