mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
dd02936f81
LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot SATA: * SerDes2 Lane3 to SATA port USB 3.0: one super speed USB 3.0 type A port one Micro-AB port UART: supports two UARTs up to 115200 bps for console Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
158 lines
3.4 KiB
C
158 lines
3.4 KiB
C
/*
|
|
* Copyright 2016 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Freescale LS1046ARDB board-specific CPLD controlling supports.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/io.h>
|
|
#include "cpld.h"
|
|
|
|
u8 cpld_read(unsigned int reg)
|
|
{
|
|
void *p = (void *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
return in_8(p + reg);
|
|
}
|
|
|
|
void cpld_write(unsigned int reg, u8 value)
|
|
{
|
|
void *p = (void *)CONFIG_SYS_CPLD_BASE;
|
|
|
|
out_8(p + reg, value);
|
|
}
|
|
|
|
/* Set the boot bank to the alternate bank */
|
|
void cpld_set_altbank(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_QSPI;
|
|
u8 reg4 = CPLD_READ(soft_mux_on);
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
u8 reg7 = CPLD_READ(vbank);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
reg7 = (reg7 & ~CPLD_BANK_SEL_MASK) | CPLD_BANK_SEL_ALTBANK;
|
|
CPLD_WRITE(vbank, reg7);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
|
|
/* Set the boot bank to the default bank */
|
|
void cpld_set_defbank(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_QSPI;
|
|
u8 reg4 = CPLD_READ(soft_mux_on);
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, reg4 | CPLD_SW_MUX_BANK_SEL | 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
CPLD_WRITE(vbank, 0);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
|
|
void cpld_set_sd(void)
|
|
{
|
|
u16 reg = CPLD_CFG_RCW_SRC_SD;
|
|
u8 reg5 = (u8)(reg >> 1);
|
|
u8 reg6 = (u8)(reg & 1);
|
|
|
|
cpld_rev_bit(®5);
|
|
|
|
CPLD_WRITE(soft_mux_on, 1);
|
|
|
|
CPLD_WRITE(cfg_rcw_src1, reg5);
|
|
CPLD_WRITE(cfg_rcw_src2, reg6);
|
|
|
|
CPLD_WRITE(system_rst, 1);
|
|
}
|
|
#ifdef DEBUG
|
|
static void cpld_dump_regs(void)
|
|
{
|
|
printf("cpld_ver = %x\n", CPLD_READ(cpld_ver));
|
|
printf("cpld_ver_sub = %x\n", CPLD_READ(cpld_ver_sub));
|
|
printf("pcba_ver = %x\n", CPLD_READ(pcba_ver));
|
|
printf("soft_mux_on = %x\n", CPLD_READ(soft_mux_on));
|
|
printf("cfg_rcw_src1 = %x\n", CPLD_READ(cfg_rcw_src1));
|
|
printf("cfg_rcw_src2 = %x\n", CPLD_READ(cfg_rcw_src2));
|
|
printf("vbank = %x\n", CPLD_READ(vbank));
|
|
printf("sysclk_sel = %x\n", CPLD_READ(sysclk_sel));
|
|
printf("uart_sel = %x\n", CPLD_READ(uart_sel));
|
|
printf("sd1refclk_sel = %x\n", CPLD_READ(sd1refclk_sel));
|
|
printf("rgmii_1588_sel = %x\n", CPLD_READ(rgmii_1588_sel));
|
|
printf("1588_clk_sel = %x\n", CPLD_READ(reg_1588_clk_sel));
|
|
printf("status_led = %x\n", CPLD_READ(status_led));
|
|
printf("sd_emmc = %x\n", CPLD_READ(sd_emmc));
|
|
printf("vdd_en = %x\n", CPLD_READ(vdd_en));
|
|
printf("vdd_sel = %x\n", CPLD_READ(vdd_sel));
|
|
putc('\n');
|
|
}
|
|
#endif
|
|
|
|
void cpld_rev_bit(unsigned char *value)
|
|
{
|
|
u8 rev_val, val;
|
|
int i;
|
|
|
|
val = *value;
|
|
rev_val = val & 1;
|
|
for (i = 1; i <= 7; i++) {
|
|
val >>= 1;
|
|
rev_val <<= 1;
|
|
rev_val |= val & 1;
|
|
}
|
|
|
|
*value = rev_val;
|
|
}
|
|
|
|
int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rc = 0;
|
|
|
|
if (argc <= 1)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if (strcmp(argv[1], "reset") == 0) {
|
|
if (strcmp(argv[2], "altbank") == 0)
|
|
cpld_set_altbank();
|
|
else if (strcmp(argv[2], "sd") == 0)
|
|
cpld_set_sd();
|
|
else
|
|
cpld_set_defbank();
|
|
#ifdef DEBUG
|
|
} else if (strcmp(argv[1], "dump") == 0) {
|
|
cpld_dump_regs();
|
|
#endif
|
|
} else {
|
|
rc = cmd_usage(cmdtp);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
|
|
"Reset the board or alternate bank",
|
|
"reset: reset to default bank\n"
|
|
"cpld reset altbank: reset to alternate bank\n"
|
|
"cpld reset sd: reset to boot from SD card\n"
|
|
#ifdef DEBUG
|
|
"cpld dump - display the CPLD registers\n"
|
|
#endif
|
|
);
|