u-boot/board/mini-box/picosam9g45/Makefile
Erik van Luijk bfc37f3cb8 arm: at91: add support for mini-box picosam9g45 board
Bootlog:
U-Boot SPL 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21)
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 258000 Hz, block size 512
mci: setting clock 33024000 Hz, block size 512
reading u-boot.img
reading u-boot.img

U-Boot 2015.10-rc1-00452-g96a7ed1 (Aug 17 2015 - 10:32:21 +0000)

CPU: AT91SAM9G45
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
       Watchdog enabled
DRAM:  256 MiB
WARNING: Caches not enabled
MMC:   mci: 0
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 260416 Hz, block size 512
mci: setting clock 33333333 Hz, block size 512
reading uboot.env
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Error: macb0 address not set.

Hit any key to stop autoboot:  0
U-Boot>

Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
[add 'picosam9g45_defconfig' to MAINTAINERS]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-08-21 15:47:04 +02:00

19 lines
432 B
Makefile

#
# Makefile for mini-box PICOSAM9G45 (AT91SAM9G45) based board
# (C) Copytight 2015 Inter Act B.V.
#
# Based on:
# U-Boot file: board/atmel/at91sam9m10g45ek/Makefile
#
# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2008
# Stelian Pop <stelian@popies.net>
# Lead Tech Design <www.leadtechdesign.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += picosam9g45.o
obj-y += led.o