u-boot/board/esd/mecp5123/mecp5123.c
Simon Glass e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00

208 lines
5.2 KiB
C

/*
* (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
* (C) Copyright 2009 Dave Srl www.dave.eu
* (C) Copyright 2009 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/bitops.h>
#include <command.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/mpc512x.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
int eeprom_write_enable(unsigned dev_addr, int state)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
if (dev_addr != CONFIG_SYS_I2C_EEPROM_ADDR)
return -1;
if (state == 0)
setbits_be32(&im->gpio.gpdat, 0x00100000);
else
clrbits_be32(&im->gpio.gpdat, 0x00100000);
return 0;
}
int board_early_init_f(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
int i;
/*
* Initialize Local Window for boot access
*/
out_be32(&im->sysconf.lpbaw,
CSAW_START(0xffb00000) | CSAW_STOP(0xffb00000, 0x00010000));
sync_law(&im->sysconf.lpbaw);
/*
* Configure MSCAN clocks
*/
for (i=0; i<4; ++i) {
out_be32(&im->clk.msccr[i], 0x00300000);
out_be32(&im->clk.msccr[i], 0x00310000);
}
/*
* Configure GPIO's
*/
clrbits_be32(&im->gpio.gpodr, 0x000000e0);
clrbits_be32(&im->gpio.gpdir, 0x00ef0000);
setbits_be32(&im->gpio.gpdir, 0x001000e0);
setbits_be32(&im->gpio.gpdat, 0x00100000);
return 0;
}
phys_size_t initdram(int board_type)
{
return get_ram_size(0, fixed_sdram(NULL, NULL, 0));
}
int misc_init_r(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 val;
/*
* Optimize access to profibus chip (VPC3) on the local bus
*/
/*
* Select 1:1 for LPC_DIV
*/
val = in_be32(&im->clk.scfr[0]) & ~SCFR1_LPC_DIV_MASK;
out_be32(&im->clk.scfr[0], val | (0x1 << SCFR1_LPC_DIV_SHIFT));
/*
* Configure LPC Chips Select Deadcycle Control Register
* CS0 - device can drive data 2 clock cycle(s) after CS deassertion
* CS1 - device can drive data 1 clock cycle(s) after CS deassertion
*/
clrbits_be32(&im->lpc.cs_dccr, 0x000000ff);
setbits_be32(&im->lpc.cs_dccr, (0x00 << 4) | (0x01 << 0));
/*
* Configure LPC Chips Select Holdcycle Control Register
* CS0 - data is valid 2 clock cycle(s) after CS deassertion
* CS1 - data is valid 1 clock cycle(s) after CS deassertion
*/
clrbits_be32(&im->lpc.cs_hccr, 0x000000ff);
setbits_be32(&im->lpc.cs_hccr, (0x00 << 4) | (0x01 << 0));
return 0;
}
static iopin_t ioregs_init[] = {
/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
{
offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC1=SELECT LPC_CS1 */
{
offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC5_2 */
{
offsetof(struct ioctrl512x, io_control_psc5_2), 1, 0,
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC5_3 */
{
offsetof(struct ioctrl512x, io_control_psc5_3), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC7_3 */
{
offsetof(struct ioctrl512x, io_control_psc7_3), 1, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC9_0 */
{
offsetof(struct ioctrl512x, io_control_psc9_0), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC10_0 */
{
offsetof(struct ioctrl512x, io_control_psc10_0), 3, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC10_3 */
{
offsetof(struct ioctrl512x, io_control_psc10_3), 1, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC3=SELECT PSC11_0 */
{
offsetof(struct ioctrl512x, io_control_psc11_0), 4, 0,
IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
},
/* FUNC0=SELECT IRQ0 */
{
offsetof(struct ioctrl512x, io_control_irq0), 4, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
}
};
static iopin_t rev2_silicon_pci_ioregs_init[] = {
/* FUNC0=PCI Sets next 54 to PCI pads */
{
offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
}
};
int checkboard(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 spridr;
puts("Board: MECP_5123\n");
/*
* Initialize function mux & slew rate IO inter alia on IO
* Pins
*/
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
spridr = in_be32(&im->sysconf.spridr);
if (SVR_MJREV(spridr) >= 2)
iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
return 0;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
return 0;
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */