u-boot/include/netdev.h
Thomas Chou c960b13ed2 net: add altera triple speeds ethernet mac driver
This driver supports the Altera triple speeds 10/100/1000 ethernet
mac.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-05-03 14:52:49 -07:00

181 lines
5.1 KiB
C

/*
* (C) Copyright 2008
* Benjamin Warren, biggerbadderben@gmail.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* netdev.h - definitions an prototypes for network devices
*/
#ifndef _NETDEV_H_
#define _NETDEV_H_
/*
* Board and CPU-specific initialization functions
* board_eth_init() has highest priority. cpu_eth_init() only
* gets called if board_eth_init() isn't instantiated or fails.
* Return values:
* 0: success
* -1: failure
*/
int board_eth_init(bd_t *bis);
int cpu_eth_init(bd_t *bis);
/* Driver initialization prototypes */
int altera_tse_initialize(u8 dev_num, int mac_base,
int sgdma_rx_base, int sgdma_tx_base);
int au1x00_enet_initialize(bd_t*);
int at91emac_register(bd_t *bis, unsigned long iobase);
int bfin_EMAC_initialize(bd_t *bis);
int cs8900_initialize(u8 dev_num, int base_addr);
int dc21x4x_initialize(bd_t *bis);
int davinci_emac_initialize(void);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int ethoc_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
int fec_initialize (bd_t *bis);
int fecmxc_initialize (bd_t *bis);
int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
int kirkwood_egiga_initialize(bd_t *bis);
int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
int mcffec_initialize(bd_t *bis);
int mpc512x_fec_initialize(bd_t *bis);
int mpc5xxx_fec_initialize(bd_t *bis);
int mpc8220_fec_initialize(bd_t *bis);
int mpc82xx_scc_enet_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
int pcnet_initialize(bd_t *bis);
int plb2800_eth_initialize(bd_t *bis);
int ppc_4xx_eth_initialize (bd_t *bis);
int rtl8139_initialize(bd_t *bis);
int rtl8169_initialize(bd_t *bis);
int scc_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
int smc911x_initialize(u8 dev_num, int base_addr);
int smc91111_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int sh_eth_initialize(bd_t *bis);
int dm9000_initialize(bd_t *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
* Return value is total # of devices found */
static inline int pci_eth_init(bd_t *bis)
{
int num = 0;
#ifdef CONFIG_PCI
#ifdef CONFIG_EEPRO100
num += eepro100_initialize(bis);
#endif
#ifdef CONFIG_TULIP
num += dc21x4x_initialize(bis);
#endif
#ifdef CONFIG_E1000
num += e1000_initialize(bis);
#endif
#ifdef CONFIG_PCNET
num += pcnet_initialize(bis);
#endif
#ifdef CONFIG_NATSEMI
num += natsemi_initialize(bis);
#endif
#ifdef CONFIG_NS8382X
num += ns8382x_initialize(bis);
#endif
#if defined(CONFIG_RTL8139)
num += rtl8139_initialize(bis);
#endif
#if defined(CONFIG_RTL8169)
num += rtl8169_initialize(bis);
#endif
#if defined(CONFIG_ULI526X)
num += uli526x_initialize(bis);
#endif
#endif /* CONFIG_PCI */
return num;
}
/*
* Boards with mv88e61xx switch can use this by defining
* CONFIG_MV88E61XX_SWITCH in respective board configheader file
* the stuct and enums here are used to specify switch configuration params
*/
#if defined(CONFIG_MV88E61XX_SWITCH)
enum mv88e61xx_cfg_vlan {
MV88E61XX_VLANCFG_DEFAULT,
MV88E61XX_VLANCFG_ROUTER
};
enum mv88e61xx_cfg_mdip {
MV88E61XX_MDIP_NOCHANGE,
MV88E61XX_MDIP_REVERSE
};
enum mv88e61xx_cfg_ledinit {
MV88E61XX_LED_INIT_DIS,
MV88E61XX_LED_INIT_EN
};
enum mv88e61xx_cfg_rgmiid {
MV88E61XX_RGMII_DELAY_DIS,
MV88E61XX_RGMII_DELAY_EN
};
enum mv88e61xx_cfg_prtstt {
MV88E61XX_PORTSTT_DISABLED,
MV88E61XX_PORTSTT_BLOCKING,
MV88E61XX_PORTSTT_LEARNING,
MV88E61XX_PORTSTT_FORWARDING
};
struct mv88e61xx_config {
char *name;
enum mv88e61xx_cfg_vlan vlancfg;
enum mv88e61xx_cfg_rgmiid rgmii_delay;
enum mv88e61xx_cfg_prtstt portstate;
enum mv88e61xx_cfg_ledinit led_init;
enum mv88e61xx_cfg_mdip mdip;
u32 ports_enabled;
u8 cpuport;
};
int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
#endif /* CONFIG_MV88E61XX_SWITCH */
#endif /* _NETDEV_H_ */