mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
fa47a28661
This patch modifies mxcmmc.c to be used not only by i.MX27 but also by i.MX31 boards. Both use the same SD controller, but have different clock set-ups. The i.MX27 imx_get_XXXclock functions are made static to generic.c and a public mxc_get_clock() function is provided. Pins, base address and prototypes for an i.MX31 specific board_init_mmc() are provided. Some of the i.MX27 clock getters are unused and marked as such to avoid warnings (./MAKEALL -s mx27), but the code was left in for future use. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
381 lines
8.7 KiB
C
381 lines
8.7 KiB
C
/*
|
|
* Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
* Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <div64.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#ifdef CONFIG_MXC_MMC
|
|
#include <asm/arch/mxcmmc.h>
|
|
#endif
|
|
|
|
/*
|
|
* get the system pll clock in Hz
|
|
*
|
|
* mfi + mfn / (mfd +1)
|
|
* f = 2 * f_ref * --------------------
|
|
* pd + 1
|
|
*/
|
|
static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
|
|
{
|
|
unsigned int mfi = (pll >> 10) & 0xf;
|
|
unsigned int mfn = pll & 0x3ff;
|
|
unsigned int mfd = (pll >> 16) & 0x3ff;
|
|
unsigned int pd = (pll >> 26) & 0xf;
|
|
|
|
mfi = mfi <= 5 ? 5 : mfi;
|
|
|
|
return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
|
|
(mfd + 1) * (pd + 1));
|
|
}
|
|
|
|
static ulong clk_in_32k(void)
|
|
{
|
|
return 1024 * CONFIG_MX27_CLK32;
|
|
}
|
|
|
|
static ulong clk_in_26m(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
|
|
/* divide by 1.5 */
|
|
return 26000000 * 2 / 3;
|
|
} else {
|
|
return 26000000;
|
|
}
|
|
}
|
|
|
|
static ulong imx_get_mpllclk(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
ulong cscr = readl(&pll->cscr);
|
|
ulong fref;
|
|
|
|
if (cscr & CSCR_MCU_SEL)
|
|
fref = clk_in_26m();
|
|
else
|
|
fref = clk_in_32k();
|
|
|
|
return imx_decode_pll(readl(&pll->mpctl0), fref);
|
|
}
|
|
|
|
static ulong imx_get_armclk(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
ulong cscr = readl(&pll->cscr);
|
|
ulong fref = imx_get_mpllclk();
|
|
ulong div;
|
|
|
|
if (!(cscr & CSCR_ARM_SRC_MPLL))
|
|
fref = lldiv((fref * 2), 3);
|
|
|
|
div = ((cscr >> 12) & 0x3) + 1;
|
|
|
|
return lldiv(fref, div);
|
|
}
|
|
|
|
static ulong imx_get_ahbclk(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
ulong cscr = readl(&pll->cscr);
|
|
ulong fref = imx_get_mpllclk();
|
|
ulong div;
|
|
|
|
div = ((cscr >> 8) & 0x3) + 1;
|
|
|
|
return lldiv(fref * 2, 3 * div);
|
|
}
|
|
|
|
static __attribute__((unused)) ulong imx_get_spllclk(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
ulong cscr = readl(&pll->cscr);
|
|
ulong fref;
|
|
|
|
if (cscr & CSCR_SP_SEL)
|
|
fref = clk_in_26m();
|
|
else
|
|
fref = clk_in_32k();
|
|
|
|
return imx_decode_pll(readl(&pll->spctl0), fref);
|
|
}
|
|
|
|
static ulong imx_decode_perclk(ulong div)
|
|
{
|
|
return lldiv((imx_get_mpllclk() * 2), (div * 3));
|
|
}
|
|
|
|
static ulong imx_get_perclk1(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
|
|
}
|
|
|
|
static ulong imx_get_perclk2(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
|
|
}
|
|
|
|
static __attribute__((unused)) ulong imx_get_perclk3(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
|
|
}
|
|
|
|
static __attribute__((unused)) ulong imx_get_perclk4(void)
|
|
{
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
|
|
}
|
|
|
|
unsigned int mxc_get_clock(enum mxc_clock clk)
|
|
{
|
|
switch (clk) {
|
|
case MXC_ARM_CLK:
|
|
return imx_get_armclk();
|
|
case MXC_UART_CLK:
|
|
return imx_get_perclk1();
|
|
case MXC_FEC_CLK:
|
|
return imx_get_ahbclk();
|
|
case MXC_ESDHC_CLK:
|
|
return imx_get_perclk2();
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo (void)
|
|
{
|
|
char buf[32];
|
|
|
|
printf("CPU: Freescale i.MX27 at %s MHz\n\n",
|
|
strmhz(buf, imx_get_mpllclk()));
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_FEC_MXC)
|
|
struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
|
|
|
|
/* enable FEC clock */
|
|
writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
|
|
writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
|
|
return fecmxc_initialize(bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Initializes on-chip MMC controllers.
|
|
* to override, implement board_mmc_init()
|
|
*/
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_MXC_MMC
|
|
return mxc_mmc_init(bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
void imx_gpio_mode(int gpio_mode)
|
|
{
|
|
struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
|
|
unsigned int pin = gpio_mode & GPIO_PIN_MASK;
|
|
unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
|
|
unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
|
|
unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
|
|
unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
|
|
unsigned int tmp;
|
|
|
|
/* Pullup enable */
|
|
if (gpio_mode & GPIO_PUEN) {
|
|
writel(readl(®s->port[port].puen) | (1 << pin),
|
|
®s->port[port].puen);
|
|
} else {
|
|
writel(readl(®s->port[port].puen) & ~(1 << pin),
|
|
®s->port[port].puen);
|
|
}
|
|
|
|
/* Data direction */
|
|
if (gpio_mode & GPIO_OUT) {
|
|
writel(readl(®s->port[port].ddir) | 1 << pin,
|
|
®s->port[port].ddir);
|
|
} else {
|
|
writel(readl(®s->port[port].ddir) & ~(1 << pin),
|
|
®s->port[port].ddir);
|
|
}
|
|
|
|
/* Primary / alternate function */
|
|
if (gpio_mode & GPIO_AF) {
|
|
writel(readl(®s->port[port].gpr) | (1 << pin),
|
|
®s->port[port].gpr);
|
|
} else {
|
|
writel(readl(®s->port[port].gpr) & ~(1 << pin),
|
|
®s->port[port].gpr);
|
|
}
|
|
|
|
/* use as gpio? */
|
|
if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
|
|
writel(readl(®s->port[port].gius) | (1 << pin),
|
|
®s->port[port].gius);
|
|
} else {
|
|
writel(readl(®s->port[port].gius) & ~(1 << pin),
|
|
®s->port[port].gius);
|
|
}
|
|
|
|
/* Output / input configuration */
|
|
if (pin < 16) {
|
|
tmp = readl(®s->port[port].ocr1);
|
|
tmp &= ~(3 << (pin * 2));
|
|
tmp |= (ocr << (pin * 2));
|
|
writel(tmp, ®s->port[port].ocr1);
|
|
|
|
writel(readl(®s->port[port].iconfa1) & ~(3 << (pin * 2)),
|
|
®s->port[port].iconfa1);
|
|
writel(readl(®s->port[port].iconfa1) | aout << (pin * 2),
|
|
®s->port[port].iconfa1);
|
|
writel(readl(®s->port[port].iconfb1) & ~(3 << (pin * 2)),
|
|
®s->port[port].iconfb1);
|
|
writel(readl(®s->port[port].iconfb1) | bout << (pin * 2),
|
|
®s->port[port].iconfb1);
|
|
} else {
|
|
pin -= 16;
|
|
|
|
tmp = readl(®s->port[port].ocr2);
|
|
tmp &= ~(3 << (pin * 2));
|
|
tmp |= (ocr << (pin * 2));
|
|
writel(tmp, ®s->port[port].ocr2);
|
|
|
|
writel(readl(®s->port[port].iconfa2) & ~(3 << (pin * 2)),
|
|
®s->port[port].iconfa2);
|
|
writel(readl(®s->port[port].iconfa2) | aout << (pin * 2),
|
|
®s->port[port].iconfa2);
|
|
writel(readl(®s->port[port].iconfb2) & ~(3 << (pin * 2)),
|
|
®s->port[port].iconfb2);
|
|
writel(readl(®s->port[port].iconfb2) | bout << (pin * 2),
|
|
®s->port[port].iconfb2);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_UART
|
|
void mx27_uart1_init_pins(void)
|
|
{
|
|
int i;
|
|
unsigned int mode[] = {
|
|
PE12_PF_UART1_TXD,
|
|
PE13_PF_UART1_RXD,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode); i++)
|
|
imx_gpio_mode(mode[i]);
|
|
|
|
}
|
|
#endif /* CONFIG_MXC_UART */
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
void mx27_fec_init_pins(void)
|
|
{
|
|
int i;
|
|
unsigned int mode[] = {
|
|
PD0_AIN_FEC_TXD0,
|
|
PD1_AIN_FEC_TXD1,
|
|
PD2_AIN_FEC_TXD2,
|
|
PD3_AIN_FEC_TXD3,
|
|
PD4_AOUT_FEC_RX_ER,
|
|
PD5_AOUT_FEC_RXD1,
|
|
PD6_AOUT_FEC_RXD2,
|
|
PD7_AOUT_FEC_RXD3,
|
|
PD8_AF_FEC_MDIO,
|
|
PD9_AIN_FEC_MDC | GPIO_PUEN,
|
|
PD10_AOUT_FEC_CRS,
|
|
PD11_AOUT_FEC_TX_CLK,
|
|
PD12_AOUT_FEC_RXD0,
|
|
PD13_AOUT_FEC_RX_DV,
|
|
PD14_AOUT_FEC_CLR,
|
|
PD15_AOUT_FEC_COL,
|
|
PD16_AIN_FEC_TX_ER,
|
|
PF23_AIN_FEC_TX_EN,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode); i++)
|
|
imx_gpio_mode(mode[i]);
|
|
}
|
|
|
|
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
|
|
{
|
|
int i;
|
|
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
|
|
struct fuse_bank *bank = &iim->bank[0];
|
|
struct fuse_bank0_regs *fuse =
|
|
(struct fuse_bank0_regs *)bank->fuse_regs;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
|
|
}
|
|
#endif /* CONFIG_FEC_MXC */
|
|
|
|
#ifdef CONFIG_MXC_MMC
|
|
void mx27_sd1_init_pins(void)
|
|
{
|
|
int i;
|
|
unsigned int mode[] = {
|
|
PE18_PF_SD1_D0,
|
|
PE19_PF_SD1_D1,
|
|
PE20_PF_SD1_D2,
|
|
PE21_PF_SD1_D3,
|
|
PE22_PF_SD1_CMD,
|
|
PE23_PF_SD1_CLK,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode); i++)
|
|
imx_gpio_mode(mode[i]);
|
|
|
|
}
|
|
|
|
void mx27_sd2_init_pins(void)
|
|
{
|
|
int i;
|
|
unsigned int mode[] = {
|
|
PB4_PF_SD2_D0,
|
|
PB5_PF_SD2_D1,
|
|
PB6_PF_SD2_D2,
|
|
PB7_PF_SD2_D3,
|
|
PB8_PF_SD2_CMD,
|
|
PB9_PF_SD2_CLK,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode); i++)
|
|
imx_gpio_mode(mode[i]);
|
|
|
|
}
|
|
#endif /* CONFIG_MXC_MMC */
|