u-boot/board/samsung/smdk6400/smdk6400.c
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00

130 lines
3.3 KiB
C

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <s3c6400.h>
/* ------------------------------------------------------------------------- */
#define CS8900_Tacs 0x0 /* 0clk address set-up */
#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
#define CS8900_Tacc 0xE /* 14clk access cycle */
#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
#define CS8900_Tah 0x4 /* 4clk address holding time */
#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
static inline void delay(unsigned long loops)
{
__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
"bne 1b"
: "=r" (loops) : "0" (loops));
}
/*
* Miscellaneous platform dependent initialisations
*/
static void cs8900_pre_init(void)
{
SROM_BW_REG &= ~(0xf << 4);
SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
(CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
(CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
}
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
cs8900_pre_init();
/* NOR-flash in SROM0 */
/* Enable WAIT */
SROM_BW_REG |= 4 | 8 | 1;
gd->bd->bi_arch_number = MACH_TYPE;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("Board: SMDK6400\n");
return 0;
}
#endif
#ifdef CONFIG_ENABLE_MMU
ulong virt_to_phy_smdk6400(ulong addr)
{
if ((0xc0000000 <= addr) && (addr < 0xc8000000))
return addr - 0xc0000000 + 0x50000000;
else
printf("do not support this address : %08lx\n", addr);
return addr;
}
#endif
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_SYS_NAND_LEGACY)
#include <linux/mtd/nand.h>
extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
void nand_init(void)
{
nand_probe(CONFIG_SYS_NAND_BASE);
if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
print_size(nand_dev_desc[0].totlen, "\n");
}
#endif
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_16BIT;
info->chipwidth = FLASH_CFI_BY16;
info->interface = FLASH_CFI_X16;
return 1;
} else
return 0;
}