mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
ee3a55fdf0
* 'master' of git://git.denx.de/u-boot-arm: (167 commits) OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT ARM: omap3: Set SPL stack size to 8KB, image to 54KB. arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree omap4: do not enable auxiliary cores omap4: do not enable fs-usb module omap4: panda: disable uart2 pads during boot igep00x0: change mpurate from 500 to auto igep00x0: enable the use of a plain text file tegra2: trivially enable 13 mhz crystal frequency tegra: Enable keyboard for Seaboard tegra: Switch on console mux and use environment for console tegra: Add tegra keyboard driver tegra: fdt: Add keyboard definitions for Seaboard tegra: fdt: Add keyboard controller definition tegra: Add keyboard support to funcmux input: Add support for keyboard matrix decoding from an fdt input: Add generic keyboard input handler input: Add linux/input.h for key code support fdt: Add fdtdec functions to read byte array tegra: Enable LP0 on Seaboard tegra: fdt: Add EMC data for Tegra2 Seaboard tegra: i2c: Add function to find DVC bus fdt: tegra: Add EMC node to device tree tegra: Add EMC settings for Seaboard tegra: Turn off power detect in board init tegra: Set up warmboot code on Nvidia boards tegra: Setup PMC scratch info from ap20 setup tegra: Add warmboot implementation tegra: Set up PMU for Nvidia boards tegra: Add PMU to manage power supplies tegra: Add EMC support for optimal memory timings tegra: Add header file for APB_MISC register tegra: Add tegra_get_chip_type() to detect SKU tegra: Add flow, gp_padctl, fuse, sdram headers tegra: Add crypto library for warmboot code tegra: Add functions to access low-level Osc/PLL details tegra: Move ap20.h header into arch location Add AES crypto library i2c: Add TPS6586X driver Add abs() macro to return absolute value fdt: Add function to return next compatible subnode fdt: Add function to locate an array in the device tree i.MX28: Avoid redefining serial_put[cs]() i.MX28: Check if WP detection is implemented at all i.MX28: Add battery boot components to SPL i.MX28: Reorder battery status functions in SPL i.MX28: Add LRADC init to i.MX28 SPL i.MX28: Add LRADC register definitions i.MX28: Shut down the LCD controller before reset i.MX28: Add LCDIF register definitions i.MX28: Implement boot pads sampling and reporting i.MX28: Improve passing of data from SPL to U-Boot M28EVK: Add SD update command M28EVK: Implement support for new board V2.0 FEC: Abstract out register setup MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged i.MX28: Add delay after CPU bypass is cleared spi: mxs: Allow other chip selects to work spi: mxs: Introduce spi_cs_is_valid() mx53loco: Remove unneeded gpio_set_value() mx53loco: Add CONFIG_REVISION_TAG mx53loco: Turn on VUSB regulator mx53loco: Add mc34708 support and set mx53 frequency at 1GHz pmic: dialog: Avoid name conflicts imx: Add u-boot.imx as target for ARM9 i.MX SOCs i.MX2: Include asm/types.h in arch-mx25/imx-regs.h imx: usb: There is no such register i.MX25: usb: Set PORTSCx register imx: nand: Support flash based BBT i.MX25: This architecture has a GPIO4 too i.MX25: esdhc: Add mxc_get_clock infrastructure i.MX6: mx6q_sabrelite: add SATA bindings i.MX6: add enable_sata_clock() i.MX6: Add ANATOP regulator init mx28evk: add NAND support USB: ehci-mx6: Fix broken IO access M28: Scan only first 512 MB of DRAM to avoid memory wraparound Revert "i.MX28: Enable additional DRAM address bits" M28: Enable FDT support mx53loco: Add support for 1GHz operation for DA9053-based boards mx53loco: Allow to print CPU information at a later stage mx5: Add clock config interface imx-common: Factor out get_ahb_clk() i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow mx31pdk: Allow booting a zImage kernel mx6qarm2: Allow booting a zImage kernel mx6qsabrelite: Allow booting a zImage kernel mx28evk: Allow booting a zImage kernel m28evk: Allow to booting a dt kernel mx28evk: Allow to booting a dt kernel mx6qsabrelite: No need to set the direction for GPIO3_23 again pmic: Add support for the Dialog DA9053 PMIC MX53: mx53loco: Add SATA support MX53: Add support to ESG ima3 board SATA: add driver for MX5 / MX6 SOCs MX53: add function to set SATA clock to internal SATA: check for return value from sata functions MX5: Add definitions for SATA controller NET: fec_mxc.c: Add a way to disable auto negotiation Define UART4 and UART5 base addresses EXYNOS: Change bits per pixel value proper for u-boot. EXYNOS: support TRATS board display function LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI EXYNOS: support EXYNOS MIPI DSI interface driver. EXYNOS: support EXYNOS framebuffer and FIMD display drivers. LCD: add data structure for EXYNOS display driver EXYNOS: add LCD and MIPI DSI clock interface. EXYNOS: definitions of system resgister and power management registers. SMDK5250: fix compiler warning misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998 misc:pmic:max8997 MAX8997 support for PMIC driver TRATS: modify the trats's configuration ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT cm-t35: add I2C multi-bus support include/configs: Remove CONFIG_SYS_64BIT_STRTOUL include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF omap3: Introduce weak misc_init_r omap730p2: Remove empty misc_init_r omap5912osk: Remove empty misc_init_r omap4+: Remove CONFIG_ARCH_CPU_INIT omap4: Remove CONFIG_SYS_MMC_SET_DEV OMAP3: pandora: drop console kernel argument OMAP3: pandora: revise GPIO configuration ...
604 lines
15 KiB
C
604 lines
15 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Texas Instruments, <www.ti.com>
|
|
* Sukumar Ghorai <s-ghorai@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation's version 2 of
|
|
* the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <i2c.h>
|
|
#include <twl4030.h>
|
|
#include <twl6030.h>
|
|
#include <twl6035.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
/* common definitions for all OMAPs */
|
|
#define SYSCTL_SRC (1 << 25)
|
|
#define SYSCTL_SRD (1 << 26)
|
|
|
|
/* If we fail after 1 second wait, something is really bad */
|
|
#define MAX_RETRY_MS 1000
|
|
|
|
static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size);
|
|
static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
|
|
unsigned int siz);
|
|
static struct mmc hsmmc_dev[2];
|
|
|
|
#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
|
|
static void omap4_vmmc_pbias_config(struct mmc *mmc)
|
|
{
|
|
u32 value = 0;
|
|
struct omap_sys_ctrl_regs *const ctrl =
|
|
(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
|
|
|
|
|
|
value = readl(&ctrl->control_pbiaslite);
|
|
value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
|
|
writel(value, &ctrl->control_pbiaslite);
|
|
/* set VMMC to 3V */
|
|
twl6030_power_mmc_init();
|
|
value = readl(&ctrl->control_pbiaslite);
|
|
value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
|
|
writel(value, &ctrl->control_pbiaslite);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
|
|
static void omap5_pbias_config(struct mmc *mmc)
|
|
{
|
|
u32 value = 0;
|
|
struct omap_sys_ctrl_regs *const ctrl =
|
|
(struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE;
|
|
|
|
value = readl(&ctrl->control_pbias);
|
|
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
|
|
value |= SDCARD_BIAS_HIZ_MODE;
|
|
writel(value, &ctrl->control_pbias);
|
|
|
|
twl6035_mmc1_poweron_ldo();
|
|
|
|
value = readl(&ctrl->control_pbias);
|
|
value &= ~SDCARD_BIAS_HIZ_MODE;
|
|
value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
|
|
writel(value, &ctrl->control_pbias);
|
|
|
|
value = readl(&ctrl->control_pbias);
|
|
if (value & (1 << 23)) {
|
|
value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
|
|
value |= SDCARD_BIAS_HIZ_MODE;
|
|
writel(value, &ctrl->control_pbias);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
unsigned char mmc_board_init(struct mmc *mmc)
|
|
{
|
|
#if defined(CONFIG_OMAP34XX)
|
|
t2_t *t2_base = (t2_t *)T2_BASE;
|
|
struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
|
|
u32 pbias_lite;
|
|
|
|
pbias_lite = readl(&t2_base->pbias_lite);
|
|
pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0);
|
|
writel(pbias_lite, &t2_base->pbias_lite);
|
|
#endif
|
|
#if defined(CONFIG_TWL4030_POWER)
|
|
twl4030_power_mmc_init();
|
|
mdelay(100); /* ramp-up delay from Linux code */
|
|
#endif
|
|
#if defined(CONFIG_OMAP34XX)
|
|
writel(pbias_lite | PBIASLITEPWRDNZ1 |
|
|
PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
|
|
&t2_base->pbias_lite);
|
|
|
|
writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
|
|
&t2_base->devconf0);
|
|
|
|
writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
|
|
&t2_base->devconf1);
|
|
|
|
/* Change from default of 52MHz to 26MHz if necessary */
|
|
if (!(mmc->host_caps & MMC_MODE_HS_52MHz))
|
|
writel(readl(&t2_base->ctl_prog_io1) & ~CTLPROGIO1SPEEDCTRL,
|
|
&t2_base->ctl_prog_io1);
|
|
|
|
writel(readl(&prcm_base->fclken1_core) |
|
|
EN_MMC1 | EN_MMC2 | EN_MMC3,
|
|
&prcm_base->fclken1_core);
|
|
|
|
writel(readl(&prcm_base->iclken1_core) |
|
|
EN_MMC1 | EN_MMC2 | EN_MMC3,
|
|
&prcm_base->iclken1_core);
|
|
#endif
|
|
|
|
#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
|
|
/* PBIAS config needed for MMC1 only */
|
|
if (mmc->block_dev.dev == 0)
|
|
omap4_vmmc_pbias_config(mmc);
|
|
#endif
|
|
#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER)
|
|
if (mmc->block_dev.dev == 0)
|
|
omap5_pbias_config(mmc);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
void mmc_init_stream(struct hsmmc *mmc_base)
|
|
{
|
|
ulong start;
|
|
|
|
writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
|
|
|
|
writel(MMC_CMD0, &mmc_base->cmd);
|
|
start = get_timer(0);
|
|
while (!(readl(&mmc_base->stat) & CC_MASK)) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for cc!\n", __func__);
|
|
return;
|
|
}
|
|
}
|
|
writel(CC_MASK, &mmc_base->stat)
|
|
;
|
|
writel(MMC_CMD0, &mmc_base->cmd)
|
|
;
|
|
start = get_timer(0);
|
|
while (!(readl(&mmc_base->stat) & CC_MASK)) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for cc2!\n", __func__);
|
|
return;
|
|
}
|
|
}
|
|
writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
|
|
}
|
|
|
|
|
|
static int mmc_init_setup(struct mmc *mmc)
|
|
{
|
|
struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
|
|
unsigned int reg_val;
|
|
unsigned int dsor;
|
|
ulong start;
|
|
|
|
mmc_board_init(mmc);
|
|
|
|
writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
|
|
&mmc_base->sysconfig);
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for cc2!\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl);
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for softresetall!\n",
|
|
__func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl);
|
|
writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP,
|
|
&mmc_base->capa);
|
|
|
|
reg_val = readl(&mmc_base->con) & RESERVED_MASK;
|
|
|
|
writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH |
|
|
MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK |
|
|
HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con);
|
|
|
|
dsor = 240;
|
|
mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
|
|
(ICE_STOP | DTO_15THDTO | CEN_DISABLE));
|
|
mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
|
|
(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for ics!\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
|
|
|
|
writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl);
|
|
|
|
writel(IE_BADA | IE_CERR | IE_DEB | IE_DCRC | IE_DTO | IE_CIE |
|
|
IE_CEB | IE_CCRC | IE_CTO | IE_BRR | IE_BWR | IE_TC | IE_CC,
|
|
&mmc_base->ie);
|
|
|
|
mmc_init_stream(mmc_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* MMC controller internal finite state machine reset
|
|
*
|
|
* Used to reset command or data internal state machines, using respectively
|
|
* SRC or SRD bit of SYSCTL register
|
|
*/
|
|
static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit)
|
|
{
|
|
ulong start;
|
|
|
|
mmc_reg_out(&mmc_base->sysctl, bit, bit);
|
|
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->sysctl) & bit) != 0) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for sysctl %x to clear\n",
|
|
__func__, bit);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
|
|
unsigned int flags, mmc_stat;
|
|
ulong start;
|
|
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting on cmd inhibit to clear\n",
|
|
__func__);
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
writel(0xFFFFFFFF, &mmc_base->stat);
|
|
start = get_timer(0);
|
|
while (readl(&mmc_base->stat)) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for STAT (%x) to clear\n",
|
|
__func__, readl(&mmc_base->stat));
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
/*
|
|
* CMDREG
|
|
* CMDIDX[13:8] : Command index
|
|
* DATAPRNT[5] : Data Present Select
|
|
* ENCMDIDX[4] : Command Index Check Enable
|
|
* ENCMDCRC[3] : Command CRC Check Enable
|
|
* RSPTYP[1:0]
|
|
* 00 = No Response
|
|
* 01 = Length 136
|
|
* 10 = Length 48
|
|
* 11 = Length 48 Check busy after response
|
|
*/
|
|
/* Delay added before checking the status of frq change
|
|
* retry not supported by mmc.c(core file)
|
|
*/
|
|
if (cmd->cmdidx == SD_CMD_APP_SEND_SCR)
|
|
udelay(50000); /* wait 50 ms */
|
|
|
|
if (!(cmd->resp_type & MMC_RSP_PRESENT))
|
|
flags = 0;
|
|
else if (cmd->resp_type & MMC_RSP_136)
|
|
flags = RSP_TYPE_LGHT136 | CICE_NOCHECK;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
flags = RSP_TYPE_LGHT48B;
|
|
else
|
|
flags = RSP_TYPE_LGHT48;
|
|
|
|
/* enable default flags */
|
|
flags = flags | (CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK |
|
|
MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | DE_DISABLE);
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= CCCE_CHECK;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
flags |= CICE_CHECK;
|
|
|
|
if (data) {
|
|
if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) ||
|
|
(cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) {
|
|
flags |= (MSBS_MULTIBLK | BCE_ENABLE);
|
|
data->blocksize = 512;
|
|
writel(data->blocksize | (data->blocks << 16),
|
|
&mmc_base->blk);
|
|
} else
|
|
writel(data->blocksize | NBLK_STPCNT, &mmc_base->blk);
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
flags |= (DP_DATA | DDIR_READ);
|
|
else
|
|
flags |= (DP_DATA | DDIR_WRITE);
|
|
}
|
|
|
|
writel(cmd->cmdarg, &mmc_base->arg);
|
|
writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
|
|
|
|
start = get_timer(0);
|
|
do {
|
|
mmc_stat = readl(&mmc_base->stat);
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s : timeout: No status update\n", __func__);
|
|
return TIMEOUT;
|
|
}
|
|
} while (!mmc_stat);
|
|
|
|
if ((mmc_stat & IE_CTO) != 0) {
|
|
mmc_reset_controller_fsm(mmc_base, SYSCTL_SRC);
|
|
return TIMEOUT;
|
|
} else if ((mmc_stat & ERRI_MASK) != 0)
|
|
return -1;
|
|
|
|
if (mmc_stat & CC_MASK) {
|
|
writel(CC_MASK, &mmc_base->stat);
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
/* response type 2 */
|
|
cmd->response[3] = readl(&mmc_base->rsp10);
|
|
cmd->response[2] = readl(&mmc_base->rsp32);
|
|
cmd->response[1] = readl(&mmc_base->rsp54);
|
|
cmd->response[0] = readl(&mmc_base->rsp76);
|
|
} else
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
cmd->response[0] = readl(&mmc_base->rsp10);
|
|
}
|
|
}
|
|
|
|
if (data && (data->flags & MMC_DATA_READ)) {
|
|
mmc_read_data(mmc_base, data->dest,
|
|
data->blocksize * data->blocks);
|
|
} else if (data && (data->flags & MMC_DATA_WRITE)) {
|
|
mmc_write_data(mmc_base, data->src,
|
|
data->blocksize * data->blocks);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size)
|
|
{
|
|
unsigned int *output_buf = (unsigned int *)buf;
|
|
unsigned int mmc_stat;
|
|
unsigned int count;
|
|
|
|
/*
|
|
* Start Polled Read
|
|
*/
|
|
count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
|
|
count /= 4;
|
|
|
|
while (size) {
|
|
ulong start = get_timer(0);
|
|
do {
|
|
mmc_stat = readl(&mmc_base->stat);
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for status!\n",
|
|
__func__);
|
|
return TIMEOUT;
|
|
}
|
|
} while (mmc_stat == 0);
|
|
|
|
if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0)
|
|
mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
|
|
|
|
if ((mmc_stat & ERRI_MASK) != 0)
|
|
return 1;
|
|
|
|
if (mmc_stat & BRR_MASK) {
|
|
unsigned int k;
|
|
|
|
writel(readl(&mmc_base->stat) | BRR_MASK,
|
|
&mmc_base->stat);
|
|
for (k = 0; k < count; k++) {
|
|
*output_buf = readl(&mmc_base->data);
|
|
output_buf++;
|
|
}
|
|
size -= (count*4);
|
|
}
|
|
|
|
if (mmc_stat & BWR_MASK)
|
|
writel(readl(&mmc_base->stat) | BWR_MASK,
|
|
&mmc_base->stat);
|
|
|
|
if (mmc_stat & TC_MASK) {
|
|
writel(readl(&mmc_base->stat) | TC_MASK,
|
|
&mmc_base->stat);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
|
|
unsigned int size)
|
|
{
|
|
unsigned int *input_buf = (unsigned int *)buf;
|
|
unsigned int mmc_stat;
|
|
unsigned int count;
|
|
|
|
/*
|
|
* Start Polled Read
|
|
*/
|
|
count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
|
|
count /= 4;
|
|
|
|
while (size) {
|
|
ulong start = get_timer(0);
|
|
do {
|
|
mmc_stat = readl(&mmc_base->stat);
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for status!\n",
|
|
__func__);
|
|
return TIMEOUT;
|
|
}
|
|
} while (mmc_stat == 0);
|
|
|
|
if ((mmc_stat & (IE_DTO | IE_DCRC | IE_DEB)) != 0)
|
|
mmc_reset_controller_fsm(mmc_base, SYSCTL_SRD);
|
|
|
|
if ((mmc_stat & ERRI_MASK) != 0)
|
|
return 1;
|
|
|
|
if (mmc_stat & BWR_MASK) {
|
|
unsigned int k;
|
|
|
|
writel(readl(&mmc_base->stat) | BWR_MASK,
|
|
&mmc_base->stat);
|
|
for (k = 0; k < count; k++) {
|
|
writel(*input_buf, &mmc_base->data);
|
|
input_buf++;
|
|
}
|
|
size -= (count*4);
|
|
}
|
|
|
|
if (mmc_stat & BRR_MASK)
|
|
writel(readl(&mmc_base->stat) | BRR_MASK,
|
|
&mmc_base->stat);
|
|
|
|
if (mmc_stat & TC_MASK) {
|
|
writel(readl(&mmc_base->stat) | TC_MASK,
|
|
&mmc_base->stat);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
|
|
unsigned int dsor = 0;
|
|
ulong start;
|
|
|
|
/* configue bus width */
|
|
switch (mmc->bus_width) {
|
|
case 8:
|
|
writel(readl(&mmc_base->con) | DTW_8_BITMODE,
|
|
&mmc_base->con);
|
|
break;
|
|
|
|
case 4:
|
|
writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
|
|
&mmc_base->con);
|
|
writel(readl(&mmc_base->hctl) | DTW_4_BITMODE,
|
|
&mmc_base->hctl);
|
|
break;
|
|
|
|
case 1:
|
|
default:
|
|
writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
|
|
&mmc_base->con);
|
|
writel(readl(&mmc_base->hctl) & ~DTW_4_BITMODE,
|
|
&mmc_base->hctl);
|
|
break;
|
|
}
|
|
|
|
/* configure clock with 96Mhz system clock.
|
|
*/
|
|
if (mmc->clock != 0) {
|
|
dsor = (MMC_CLOCK_REFERENCE * 1000000 / mmc->clock);
|
|
if ((MMC_CLOCK_REFERENCE * 1000000) / dsor > mmc->clock)
|
|
dsor++;
|
|
}
|
|
|
|
mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
|
|
(ICE_STOP | DTO_15THDTO | CEN_DISABLE));
|
|
|
|
mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
|
|
(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
|
|
|
|
start = get_timer(0);
|
|
while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY) {
|
|
if (get_timer(0) - start > MAX_RETRY_MS) {
|
|
printf("%s: timedout waiting for ics!\n", __func__);
|
|
return;
|
|
}
|
|
}
|
|
writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
|
|
}
|
|
|
|
int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max)
|
|
{
|
|
struct mmc *mmc;
|
|
|
|
mmc = &hsmmc_dev[dev_index];
|
|
|
|
sprintf(mmc->name, "OMAP SD/MMC");
|
|
mmc->send_cmd = mmc_send_cmd;
|
|
mmc->set_ios = mmc_set_ios;
|
|
mmc->init = mmc_init_setup;
|
|
mmc->getcd = NULL;
|
|
|
|
switch (dev_index) {
|
|
case 0:
|
|
mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
|
|
break;
|
|
#ifdef OMAP_HSMMC2_BASE
|
|
case 1:
|
|
mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE;
|
|
break;
|
|
#endif
|
|
#ifdef OMAP_HSMMC3_BASE
|
|
case 2:
|
|
mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE;
|
|
break;
|
|
#endif
|
|
default:
|
|
mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
|
|
return 1;
|
|
}
|
|
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
|
|
MMC_MODE_HC) & ~host_caps_mask;
|
|
|
|
mmc->f_min = 400000;
|
|
|
|
if (f_max != 0)
|
|
mmc->f_max = f_max;
|
|
else {
|
|
if (mmc->host_caps & MMC_MODE_HS) {
|
|
if (mmc->host_caps & MMC_MODE_HS_52MHz)
|
|
mmc->f_max = 52000000;
|
|
else
|
|
mmc->f_max = 26000000;
|
|
} else
|
|
mmc->f_max = 20000000;
|
|
}
|
|
|
|
mmc->b_max = 0;
|
|
|
|
#if defined(CONFIG_OMAP34XX)
|
|
/*
|
|
* Silicon revs 2.1 and older do not support multiblock transfers.
|
|
*/
|
|
if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21))
|
|
mmc->b_max = 1;
|
|
#endif
|
|
|
|
mmc_register(mmc);
|
|
|
|
return 0;
|
|
}
|