Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-02 17:41:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/common.h
Julius Werner 027b728d4a Add support for LZ4 decompression algorithm 
This patch adds support for LZ4-compressed FIT image contents. This
algorithm has a slightly worse compression ration than LZO while being
nearly twice as fast to decompress. When loading images from a fast
storage medium this usually results in a boot time win.

Sandbox-tested only since I don't have a U-Boot development system set
up right now. The code was imported unchanged from coreboot where it's
proven to work, though. I'm mostly interested in getting this recognized
by mkImage for use in a downstream project.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-11 17:12:10 -04:00

1002 lines
27 KiB
C
Raw Blame History

/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __COMMON_H_
#define __COMMON_H_ 1
#ifndef __ASSEMBLY__ /* put C only stuff in this section */
typedef unsigned char uchar;
typedef volatile unsigned long vu_long;
typedef volatile unsigned short vu_short;
typedef volatile unsigned char vu_char;
#include <config.h>
#include <asm-offsets.h>
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
#if defined(CONFIG_8xx)
#include <asm/8xx_immap.h>
#if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
defined(CONFIG_MPC866) || \
defined(CONFIG_MPC866P)
# define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC885)
# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) \
|| defined(CONFIG_MPC860T) \
|| defined(CONFIG_MPC866_FAMILY) \
|| defined(CONFIG_MPC885_FAMILY)
# define CONFIG_MPC86x 1
#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_MPC5xxx)
#include <mpc5xxx.h>
#elif defined(CONFIG_MPC512X)
#include <asm/immap_512x.h>
#elif defined(CONFIG_MPC8260)
#if defined(CONFIG_MPC8247) \
|| defined(CONFIG_MPC8272)
#define CONFIG_MPC8272_FAMILY 1
#endif
#include <asm/immap_8260.h>
#endif
#ifdef CONFIG_MPC86xx
#include <mpc86xx.h>
#include <asm/immap_86xx.h>
#endif
#ifdef CONFIG_MPC85xx
#include <mpc85xx.h>
#include <asm/immap_85xx.h>
#endif
#ifdef CONFIG_MPC83xx
#include <mpc83xx.h>
#include <asm/immap_83xx.h>
#endif
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
#ifdef CONFIG_BLACKFIN
#include <asm/blackfin.h>
#endif
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
#include <part.h>
#include <flash.h>
#include <image.h>
/* Bring in printf format macros if inttypes.h is included */
#define __STDC_FORMAT_MACROS
#ifdef __LP64__
#define CONFIG_SYS_SUPPORT_64BIT_DATA
#endif
#ifdef DEBUG
#define _DEBUG 1
#else
#define _DEBUG 0
#endif
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
#define debug_cond(cond, fmt, args...) \
do { \
if (cond) \
printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
debug_cond(_DEBUG, fmt, ##args)
/*
* An assertion is run-time check done in debug mode only. If DEBUG is not
* defined then it is skipped. If DEBUG is defined and the assertion fails,
* then it calls panic*( which may or may not reset/halt U-Boot (see
* CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
* before release, and after release it is hoped that they don't matter. But
* in any case these failing assertions cannot be fixed with a reset (which
* may just do the same assertion again).
*/
void __assert_fail(const char *assertion, const char *file, unsigned line,
const char *function);
#define assert(x) \
({ if (!(x) && _DEBUG) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
#ifndef BUG
#define BUG() do { \
printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
panic("BUG!"); \
} while (0)
#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
#endif /* BUG */
/* Force a compilation error if condition is true */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
#include <asm/global_data.h> /* global data used for startup functions */
/*
* enable common handling for all TQM8xxL/M boards:
* - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
* - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
* and for the TQM885D board
*/
#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
# ifndef CONFIG_TQM8xxM
# define CONFIG_TQM8xxM
# endif
#endif
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
defined(CONFIG_TQM885D)
# ifndef CONFIG_TQM8xxL
# define CONFIG_TQM8xxL
# endif
#endif
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
defined(CONFIG_ENV_IS_IN_NVRAM)
#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
/*
* Function Prototypes
*/
int dram_init(void);
void hang (void) __attribute__ ((noreturn));
int timer_init(void);
int cpu_init(void);
/* */
phys_size_t initdram (int);
#include <display_options.h>
/* common/main.c */
void main_loop (void);
int run_command(const char *cmd, int flag);
int run_command_repeatable(const char *cmd, int flag);
/**
* Run a list of commands separated by ; or even \0
*
* Note that if 'len' is not -1, then the command does not need to be nul
* terminated, Memory will be allocated for the command in that case.
*
* @param cmd List of commands to run, each separated bu semicolon
* @param len Length of commands excluding terminator if known (-1 if not)
* @param flag Execution flags (CMD_FLAG_...)
* @return 0 on success, or != 0 on error.
*/
int run_command_list(const char *cmd, int len, int flag);
extern char console_buffer[];
/* arch/$(ARCH)/lib/board.c */
void board_init_f(ulong);
void board_init_r(gd_t *, ulong) __attribute__ ((noreturn));
/**
* board_init_f_mem() - Allocate global data and set stack position
*
* This function is called by each architecture very early in the start-up
* code to set up the environment for board_init_f(). It allocates space for
* global_data (see include/asm-generic/global_data.h) and places the stack
* below this.
*
* This function requires a stack[1] Normally this is at @top. The function
* starts allocating space from 64 bytes below @top. First it creates space
* for global_data. Then it calls arch_setup_gd() which sets gd to point to
* the global_data space and can reserve additional bytes of space if
* required). Finally it allocates early malloc() memory
* (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this,
* and it returned by this function.
*
* [1] Strictly speaking it would be possible to implement this function
* in C on many archs such that it does not require a stack. However this
* does not seem hugely important as only 64 byte are wasted. The 64 bytes
* are used to handle the calling standard which generally requires pushing
* addresses or registers onto the stack. We should be able to get away with
* less if this becomes important.
*
* @top: Top of available memory, also normally the top of the stack
* @return: New stack location
*/
ulong board_init_f_mem(ulong top);
/**
* arch_setup_gd() - Set up the global_data pointer
*
* This pointer is special in some architectures and cannot easily be assigned
* to. For example on x86 it is implemented by adding a specific record to its
* Global Descriptor Table! So we we provide a function to carry out this task.
* For most architectures this can simply be:
*
* gd = gd_ptr;
*
* @gd_ptr: Pointer to global data
*/
void arch_setup_gd(gd_t *gd_ptr);
int checkboard(void);
int show_board_info(void);
int checkflash(void);
int checkdram(void);
int last_stage_init(void);
extern ulong monitor_flash_len;
int mac_read_from_eeprom(void);
extern u8 __dtb_dt_begin[]; /* embedded device tree blob */
int set_cpu_clk_info(void);
int mdm_init(void);
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void);
#else
static inline int print_cpuinfo(void)
{
return 0;
}
#endif
int update_flash_size(int flash_size);
int arch_early_init_r(void);
/**
* arch_cpu_init_dm() - init CPU after driver model is available
*
* This is called immediately after driver model is available before
* relocation. This is similar to arch_cpu_init() but is able to reference
* devices
*
* @return 0 if OK, -ve on error
*/
int arch_cpu_init_dm(void);
/**
* Reserve all necessary stacks
*
* This is used in generic board init sequence in common/board_f.c. Each
* architecture could provide this function to tailor the required stacks.
*
* On entry gd->start_addr_sp is pointing to the suggested top of the stack.
* The callee ensures gd->start_add_sp is 16-byte aligned, so architectures
* require only this can leave it untouched.
*
* On exit gd->start_addr_sp and gd->irq_sp should be set to the respective
* positions of the stack. The stack pointer(s) will be set to this later.
* gd->irq_sp is only required, if the architecture needs it.
*
* @return 0 if no error
*/
__weak int arch_reserve_stacks(void);
/**
* Show the DRAM size in a board-specific way
*
* This is used by boards to display DRAM information in their own way.
*
* @param size Size of DRAM (which should be displayed along with other info)
*/
void board_show_dram(phys_size_t size);
/**
* arch_fixup_fdt() - Write arch-specific information to fdt
*
* Defined in arch/$(ARCH)/lib/bootm-fdt.c
*
* @blob: FDT blob to write to
* @return 0 if ok, or -ve FDT_ERR_... on failure
*/
int arch_fixup_fdt(void *blob);
/* common/flash.c */
void flash_perror (int);
/* common/cmd_source.c */
int source (ulong addr, const char *fit_uname);
extern ulong load_addr; /* Default Load Address */
extern ulong save_addr; /* Default Save Address */
extern ulong save_size; /* Default Save Size */
/* common/cmd_doc.c */
void doc_probe(unsigned long physadr);
/* common/cmd_net.c */
int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
/* common/cmd_fat.c */
int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
/* common/cmd_ext2.c */
int do_ext2load(cmd_tbl_t *, int, int, char * const []);
/* common/cmd_nvedit.c */
int env_init (void);
void env_relocate (void);
int envmatch (uchar *, int);
/* Avoid unfortunate conflict with libc's getenv() */
#ifdef CONFIG_SANDBOX
#define getenv uboot_getenv
#endif
char *getenv (const char *);
int getenv_f (const char *name, char *buf, unsigned len);
ulong getenv_ulong(const char *name, int base, ulong default_val);
/**
* getenv_hex() - Return an environment variable as a hex value
*
* Decode an environment as a hex number (it may or may not have a 0x
* prefix). If the environment variable cannot be found, or does not start
* with hex digits, the default value is returned.
*
* @varname: Variable to decode
* @default_val: Value to return on error
*/
ulong getenv_hex(const char *varname, ulong default_val);
/*
* Read an environment variable as a boolean
* Return -1 if variable does not exist (default to true)
*/
int getenv_yesno(const char *var);
int saveenv (void);
int setenv (const char *, const char *);
int setenv_ulong(const char *varname, ulong value);
int setenv_hex(const char *varname, ulong value);
/**
* setenv_addr - Set an environment variable to an address in hex
*
* @varname: Environment variable to set
* @addr: Value to set it to
* @return 0 if ok, 1 on error
*/
static inline int setenv_addr(const char *varname, const void *addr)
{
return setenv_hex(varname, (ulong)addr);
}
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
# include <asm/setup.h>
# include <asm/u-boot-arm.h> /* ARM version to be fixed! */
#endif /* CONFIG_ARM */
#ifdef CONFIG_X86 /* x86 version to be fixed! */
# include <asm/u-boot-x86.h>
#endif /* CONFIG_X86 */
#ifdef CONFIG_SANDBOX
# include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */
#endif
#ifdef CONFIG_NDS32
# include <asm/mach-types.h>
# include <asm/setup.h>
# include <asm/u-boot-nds32.h>
#endif /* CONFIG_NDS32 */
#ifdef CONFIG_MIPS
# include <asm/u-boot-mips.h>
#endif /* CONFIG_MIPS */
#ifdef CONFIG_ARC
# include <asm/u-boot-arc.h>
#endif /* CONFIG_ARC */
#ifdef CONFIG_AUTO_COMPLETE
int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
#endif
int get_env_id (void);
void pci_init (void);
void pci_init_board(void);
void pciinfo (int, int);
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
int pci_pre_init (struct pci_controller *);
int is_pci_host (struct pci_controller *);
#endif
#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
# if defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init (struct pci_controller *);
# endif
# if defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init (struct pci_controller *);
# endif
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
void pcie_setup_hoses(int busno);
#endif
#endif
int misc_init_f (void);
int misc_init_r (void);
/* common/exports.c */
void jumptable_init(void);
/* common/kallsysm.c */
const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
/* api/api.c */
void api_init (void);
/* common/memsize.c */
long get_ram_size (long *, long);
phys_size_t get_effective_memsize(void);
/* $(BOARD)/$(BOARD).c */
void reset_phy (void);
void fdc_hw_init (void);
/* $(BOARD)/eeprom.c */
void eeprom_init (void);
#ifndef CONFIG_SPI
int eeprom_probe (unsigned dev_addr, unsigned offset);
#endif
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
/*
* Set this up regardless of board
* type, to prevent errors.
*/
#if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
# define CONFIG_SYS_DEF_EEPROM_ADDR 0
#else
#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
# define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
#endif
#endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
#if defined(CONFIG_SPI)
extern void spi_init_f (void);
extern void spi_init_r (void);
extern ssize_t spi_read (uchar *, int, uchar *, int);
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
/* $(BOARD)/$(BOARD).c */
int board_early_init_f (void);
int board_late_init (void);
int board_postclk_init (void); /* after clocks/timebase, before env/serial */
int board_early_init_r (void);
void board_poweroff (void);
#if defined(CONFIG_SYS_DRAM_TEST)
int testdram(void);
#endif /* CONFIG_SYS_DRAM_TEST */
/* $(CPU)/start.S */
#if defined(CONFIG_5xx) || \
defined(CONFIG_8xx)
uint get_immr (uint);
#endif
#if defined(CONFIG_MPC5xxx)
uint get_svr (void);
#endif
uint get_pvr (void);
uint get_svr (void);
uint rd_ic_cst (void);
void wr_ic_cst (uint);
void wr_ic_adr (uint);
uint rd_dc_cst (void);
void wr_dc_cst (uint);
void wr_dc_adr (uint);
int icache_status (void);
void icache_enable (void);
void icache_disable(void);
int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
void mmu_disable(void);
#if defined(CONFIG_ARM)
void relocate_code(ulong);
#else
void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
#endif
ulong get_endaddr (void);
void trap_init (ulong);
#if defined (CONFIG_4xx) || \
defined (CONFIG_MPC5xxx) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
unsigned char in8(unsigned int);
void out8(unsigned int, unsigned char);
unsigned short in16(unsigned int);
unsigned short in16r(unsigned int);
void out16(unsigned int, unsigned short value);
void out16r(unsigned int, unsigned short value);
unsigned long in32(unsigned int);
unsigned long in32r(unsigned int);
void out32(unsigned int, unsigned long value);
void out32r(unsigned int, unsigned long value);
void ppcDcbf(unsigned long value);
void ppcDcbi(unsigned long value);
void ppcSync(void);
void ppcDcbz(unsigned long value);
#endif
#if defined (CONFIG_MICROBLAZE)
unsigned short in16(unsigned int);
void out16(unsigned int, unsigned short value);
#endif
#if defined (CONFIG_MPC83xx)
void ppcDWload(unsigned int *addr, unsigned int *ret);
void ppcDWstore(unsigned int *addr, unsigned int *value);
void disable_addr_trans(void);
void enable_addr_trans(void);
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
void ddr_enable_ecc(unsigned int dram_size);
#endif
#endif
/*
* Return the current value of a monotonically increasing microsecond timer.
* Granularity may be larger than 1us if hardware does not support this.
*/
ulong timer_get_us(void);
/* $(CPU)/cpu.c */
static inline int cpumask_next(int cpu, unsigned int mask)
{
for (cpu++; !((1 << cpu) & mask); cpu++)
;
return cpu;
}
#define for_each_cpu(iter, cpu, num_cpus, mask) \
for (iter = 0, cpu = cpumask_next(-1, mask); \
iter < num_cpus; \
iter++, cpu = cpumask_next(cpu, mask)) \
int cpu_numcores (void);
int cpu_num_dspcores(void);
u32 cpu_mask (void);
u32 cpu_dsp_mask(void);
int is_core_valid (unsigned int);
int probecpu (void);
int checkcpu (void);
int checkicache (void);
int checkdcache (void);
void upmconfig (unsigned int, unsigned int *, unsigned int);
ulong get_tbclk (void);
void reset_misc (void);
void reset_cpu (ulong addr);
#if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
void ft_cpu_setup(void *blob, bd_t *bd);
#ifdef CONFIG_PCI
void ft_pci_setup(void *blob, bd_t *bd);
#endif
#endif
void smp_set_core_boot_addr(unsigned long addr, int corenr);
void smp_kick_all_cpus(void);
/* $(CPU)/serial.c */
int serial_init (void);
void serial_setbrg (void);
void serial_putc (const char);
void serial_putc_raw(const char);
void serial_puts (const char *);
int serial_getc (void);
int serial_tstc (void);
/* These versions take a stdio_dev pointer */
struct stdio_dev;
int serial_stub_getc(struct stdio_dev *sdev);
int serial_stub_tstc(struct stdio_dev *sdev);
/* $(CPU)/speed.c */
int get_clocks (void);
int get_clocks_866 (void);
int sdram_adjust_866 (void);
int adjust_sdram_tbs_8xx (void);
#if defined(CONFIG_MPC8260)
int prt_8260_clks (void);
#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
#ifdef CONFIG_4xx
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
#endif
#if defined(CONFIG_S3C24X0) || \
defined(CONFIG_LH7A40X) || \
defined(CONFIG_EP93XX)
ulong get_FCLK (void);
ulong get_HCLK (void);
ulong get_PCLK (void);
ulong get_UCLK (void);
#endif
#if defined(CONFIG_LH7A40X)
ulong get_PLLCLK (void);
#endif
#if defined(CONFIG_IMX)
ulong get_systemPLLCLK(void);
ulong get_FCLK(void);
ulong get_HCLK(void);
ulong get_BCLK(void);
ulong get_PERCLK1(void);
ulong get_PERCLK2(void);
ulong get_PERCLK3(void);
#endif
ulong get_bus_freq (ulong);
int get_serial_clock(void);
#if defined(CONFIG_MPC85xx)
typedef MPC85xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
# if defined(CONFIG_OF_LIBFDT)
void ft_fixup_cpu(void *, u64);
void ft_fixup_num_cores(void *);
# endif
#endif
#if defined(CONFIG_MPC86xx)
typedef MPC86xx_SYS_INFO sys_info_t;
void get_sys_info ( sys_info_t * );
static inline ulong get_ddr_freq(ulong dummy)
{
return get_bus_freq(dummy);
}
#else
ulong get_ddr_freq(ulong);
#endif
#if defined(CONFIG_4xx)
# if defined(CONFIG_440)
# if defined(CONFIG_440SPE)
unsigned long determine_sysper(void);
unsigned long determine_pci_clock_per(void);
# endif
# endif
typedef PPC4xx_SYS_INFO sys_info_t;
int ppc440spe_revB(void);
void get_sys_info ( sys_info_t * );
#endif
/* $(CPU)/cpu_init.c */
#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
void cpu_init_f (volatile immap_t *immr);
#endif
#if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
void cpu_init_f (void);
#endif
#ifdef CONFIG_MPC85xx
ulong cpu_init_f(void);
#endif
int cpu_init_r (void);
#if defined(CONFIG_MPC8260)
int prt_8260_rsr (void);
#elif defined(CONFIG_MPC83xx)
int prt_83xx_rsr (void);
#endif
/* $(CPU)/interrupts.c */
int interrupt_init (void);
void timer_interrupt (struct pt_regs *);
void external_interrupt (struct pt_regs *);
void irq_install_handler(int, interrupt_handler_t *, void *);
void irq_free_handler (int);
void reset_timer (void);
ulong get_timer (ulong base);
/* Return value of monotonic microsecond timer */
unsigned long timer_get_us(void);
void enable_interrupts (void);
int disable_interrupts (void);
/* $(CPU)/.../commproc.c */
int dpram_init (void);
uint dpram_base(void);
uint dpram_base_align(uint align);
uint dpram_alloc(uint size);
uint dpram_alloc_align(uint size,uint align);
void bootcount_store (ulong);
ulong bootcount_load (void);
#define BOOTCOUNT_MAGIC 0xB001C041
/* $(CPU)/.../<eth> */
void mii_init (void);
/* $(CPU)/.../lcd.c */
ulong lcd_setmem (ulong);
/* $(CPU)/.../video.c */
ulong video_setmem (ulong);
/* arch/$(ARCH)/lib/cache.c */
void enable_caches(void);
void flush_cache (unsigned long, unsigned long);
void flush_dcache_all(void);
void flush_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_all(void);
void invalidate_icache_all(void);
enum {
/* Disable caches (else flush caches but leave them active) */
CBL_DISABLE_CACHES = 1 << 0,
CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1,
CBL_ALL = 3,
};
/**
* Clean up ready for linux
*
* @param flags Flags to control what is done
*/
int cleanup_before_linux_select(int flags);
/* arch/$(ARCH)/lib/ticks.S */
uint64_t get_ticks(void);
void wait_ticks (unsigned long);
/* arch/$(ARCH)/lib/time.c */
void __udelay (unsigned long);
ulong usec2ticks (unsigned long usec);
ulong ticks2usec (unsigned long ticks);
int init_timebase (void);
/* lib/gunzip.c */
int gunzip(void *, int, unsigned char *, unsigned long *);
int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
int stoponerr, int offset);
/**
* gzwrite progress indicators: defined weak to allow board-specific
* overrides:
*
* gzwrite_progress_init called on startup
* gzwrite_progress called during decompress/write loop
* gzwrite_progress_finish called at end of loop to
* indicate success (retcode=0) or failure
*/
void gzwrite_progress_init(u64 expected_size);
void gzwrite_progress(int iteration,
u64 bytes_written,
u64 total_bytes);
void gzwrite_progress_finish(int retcode,
u64 totalwritten,
u64 totalsize,
u32 expected_crc,
u32 calculated_crc);
/**
* decompress and write gzipped image from memory to block device
*
* @param src compressed image address
* @param len compressed image length in bytes
* @param dev block device descriptor
* @param szwritebuf bytes per write (pad to erase size)
* @param startoffs offset in bytes of first write
* @param szexpected expected uncompressed length
* may be zero to use gzip trailer
* for files under 4GiB
*/
int gzwrite(unsigned char *src, int len,
struct block_dev_desc *dev,
unsigned long szwritebuf,
u64 startoffs,
u64 szexpected);
/* lib/lz4_wrapper.c */
int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn);
/* lib/qsort.c */
void qsort(void *base, size_t nmemb, size_t size,
int(*compar)(const void *, const void *));
int strcmp_compar(const void *, const void *);
/* lib/time.c */
void udelay (unsigned long);
void mdelay(unsigned long);
/* lib/uuid.c */
#include <uuid.h>
/* lib/vsprintf.c */
#include <vsprintf.h>
/* lib/strmhz.c */
char * strmhz(char *buf, unsigned long hz);
/* lib/crc32.c */
#include <u-boot/crc.h>
/* lib/rand.c */
#define RAND_MAX -1U
void srand(unsigned int seed);
unsigned int rand(void);
unsigned int rand_r(unsigned int *seedp);
/* common/console.c */
int console_init_f(void); /* Before relocation; uses the serial stuff */
int console_init_r(void); /* After relocation; uses the console stuff */
int console_assign(int file, const char *devname); /* Assign the console */
int ctrlc (void);
int had_ctrlc (void); /* have we had a Control-C since last clear? */
void clear_ctrlc (void); /* clear the Control-C condition */
int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */
int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */
/*
* STDIO based functions (can always be used)
*/
/* serial stuff */
int serial_printf (const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
/* stdin */
int getc(void);
int tstc(void);
/* stdout */
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
#define putc(...) do { } while (0)
#define puts(...) do { } while (0)
#define printf(...) do { } while (0)
#define vprintf(...) do { } while (0)
#else
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
#endif
/* stderr */
#define eputc(c) fputc(stderr, c)
#define eputs(s) fputs(stderr, s)
#define eprintf(fmt,args...) fprintf(stderr,fmt ,##args)
/*
* FILE based functions (can only be used AFTER relocation!)
*/
#define stdin 0
#define stdout 1
#define stderr 2
#define MAX_FILES 3
int fprintf(int file, const char *fmt, ...)
__attribute__ ((format (__printf__, 2, 3)));
void fputs(int file, const char *s);
void fputc(int file, const char c);
int ftstc(int file);
int fgetc(int file);
/* lib/gzip.c */
int gzip(void *dst, unsigned long *lenp,
unsigned char *src, unsigned long srclen);
int zzip(void *dst, unsigned long *lenp, unsigned char *src,
unsigned long srclen, int stoponerr,
int (*func)(unsigned long, unsigned long));
/* lib/net_utils.c */
#include <net.h>
static inline struct in_addr getenv_ip(char *var)
{
return string_to_ip(getenv(var));
}
/*
* CONSOLE multiplexing.
*/
#ifdef CONFIG_CONSOLE_MUX
#include <iomux.h>
#endif
int pcmcia_init (void);
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
#include <bootstage.h>
#ifdef CONFIG_SHOW_ACTIVITY
void show_activity(int arg);
#endif
/* Multicore arch functions */
#ifdef CONFIG_MP
int cpu_status(int nr);
int cpu_reset(int nr);
int cpu_disable(int nr);
int cpu_release(int nr, int argc, char * const argv[]);
#endif
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_PPC
/*
* Has to be included outside of the #ifndef __ASSEMBLY__ section.
* Otherwise might lead to compilation errors in assembler files.
*/
#include <asm/cache.h>
#endif
/* Put only stuff here that the assembler can digest */
#ifdef CONFIG_POST
#define CONFIG_HAS_POST
#ifndef CONFIG_POST_ALT_LIST
#define CONFIG_POST_STD_LIST
#endif
#endif
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
/*
* check_member() - Check the offset of a structure member
*
* @structure: Name of structure (e.g. global_data)
* @member: Name of member (e.g. baudrate)
* @offset: Expected offset in bytes
*/
#define check_member(structure, member, offset) _Static_assert( \
offsetof(struct structure, member) == offset, \
"`struct " #structure "` offset for `" #member "` is not " #offset)
/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
#ifdef CONFIG_EFI_STUB
#define ll_boot_init() false
#else
#define ll_boot_init() true
#endif
/* Pull in stuff for the build system */
#ifdef DO_DEPS_ONLY
# include <environment.h>
#endif
#endif /* __COMMON_H_ */
Reference in a new issue View git blame Copy permalink