Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/linux/soc/ti/ti_sci_protocol.h
Suman Anna 0466275500 firmware: ti_sci: Include linux/err.h in ti_sci_protocol.h 
The common TI SCI header file uses some macros from err.h and these
get exercised when CONFIG_TI_SCI_PROTOCOL is not defined. Include
the linux/err.h header file in this header file directly rather
than relying on source files to include it to eliminate any
potential build errors.

While at this, reorder the existing header file include to the
beginning of the file.

Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
2021-09-17 14:47:03 -04:00

704 lines
27 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Texas Instruments System Control Interface Protocol
* Based on include/linux/soc/ti/ti_sci_protocol.h from Linux.
*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Nishanth Menon
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#ifndef __TISCI_PROTOCOL_H
#define __TISCI_PROTOCOL_H
#include <linux/bitops.h>
#include <linux/err.h>
/**
* struct ti_sci_version_info - version information structure
* @abi_major: Major ABI version. Change here implies risk of backward
* compatibility break.
* @abi_minor: Minor ABI version. Change here implies new feature addition,
* or compatible change in ABI.
* @firmware_revision: Firmware revision (not usually used).
* @firmware_description: Firmware description (not usually used).
*/
struct ti_sci_version_info {
u8 abi_major;
u8 abi_minor;
u16 firmware_revision;
char firmware_description[32];
};
struct ti_sci_handle;
/**
* struct ti_sci_board_ops - Board config operations
* @board_config: Command to set the board configuration
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
* @board_config_rm: Command to set the board resource management
* configuration
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
* @board_config_security: Command to set the board security configuration
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
* @board_config_pm: Command to trigger and set the board power and clock
* management related configuration
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
*/
struct ti_sci_board_ops {
int (*board_config)(const struct ti_sci_handle *handle,
u64 addr, u32 size);
int (*board_config_rm)(const struct ti_sci_handle *handle,
u64 addr, u32 size);
int (*board_config_security)(const struct ti_sci_handle *handle,
u64 addr, u32 size);
int (*board_config_pm)(const struct ti_sci_handle *handle,
u64 addr, u32 size);
};
/**
* struct ti_sci_dev_ops - Device control operations
* @get_device: Command to request for device managed by TISCI
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
* @idle_device: Command to idle a device managed by TISCI
* Returns 0 for successful exclusive request, else returns
* corresponding error message.
* @put_device: Command to release a device managed by TISCI
* Returns 0 for successful release, else returns corresponding
* error message.
* @is_valid: Check if the device ID is a valid ID.
* Returns 0 if the ID is valid, else returns corresponding error.
* @get_context_loss_count: Command to retrieve context loss counter - this
* increments every time the device looses context. Overflow
* is possible.
* - count: pointer to u32 which will retrieve counter
* Returns 0 for successful information request and count has
* proper data, else returns corresponding error message.
* @is_idle: Reports back about device idle state
* - req_state: Returns requested idle state
* Returns 0 for successful information request and req_state and
* current_state has proper data, else returns corresponding error
* message.
* @is_stop: Reports back about device stop state
* - req_state: Returns requested stop state
* - current_state: Returns current stop state
* Returns 0 for successful information request and req_state and
* current_state has proper data, else returns corresponding error
* message.
* @is_on: Reports back about device ON(or active) state
* - req_state: Returns requested ON state
* - current_state: Returns current ON state
* Returns 0 for successful information request and req_state and
* current_state has proper data, else returns corresponding error
* message.
* @is_transitioning: Reports back if the device is in the middle of transition
* of state.
* -current_state: Returns 'true' if currently transitioning.
* @set_device_resets: Command to configure resets for device managed by TISCI.
* -reset_state: Device specific reset bit field
* Returns 0 for successful request, else returns
* corresponding error message.
* @get_device_resets: Command to read state of resets for device managed
* by TISCI.
* -reset_state: pointer to u32 which will retrieve resets
* Returns 0 for successful request, else returns
* corresponding error message.
* @release_exclusive_devices: Command to release all the exclusive devices
* attached to this host. This should be used very carefully
* and only at the end of execution of your software.
*
* NOTE: for all these functions, the following parameters are generic in
* nature:
* -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* -id: Device Identifier
*
* Request for the device - NOTE: the client MUST maintain integrity of
* usage count by balancing get_device with put_device. No refcounting is
* managed by driver for that purpose.
*/
struct ti_sci_dev_ops {
int (*get_device)(const struct ti_sci_handle *handle, u32 id);
int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id);
int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
int (*idle_device_exclusive)(const struct ti_sci_handle *handle,
u32 id);
int (*put_device)(const struct ti_sci_handle *handle, u32 id);
int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
int (*get_context_loss_count)(const struct ti_sci_handle *handle,
u32 id, u32 *count);
int (*is_idle)(const struct ti_sci_handle *handle, u32 id,
bool *requested_state);
int (*is_stop)(const struct ti_sci_handle *handle, u32 id,
bool *req_state, bool *current_state);
int (*is_on)(const struct ti_sci_handle *handle, u32 id,
bool *req_state, bool *current_state);
int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id,
bool *current_state);
int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id,
u32 reset_state);
int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id,
u32 *reset_state);
int (*release_exclusive_devices)(const struct ti_sci_handle *handle);
};
/**
* struct ti_sci_clk_ops - Clock control operations
* @get_clock: Request for activation of clock and manage by processor
* - needs_ssc: 'true' if Spread Spectrum clock is desired.
* - can_change_freq: 'true' if frequency change is desired.
* - enable_input_term: 'true' if input termination is desired.
* @idle_clock: Request for Idling a clock managed by processor
* @put_clock: Release the clock to be auto managed by TISCI
* @is_auto: Is the clock being auto managed
* - req_state: state indicating if the clock is auto managed
* @is_on: Is the clock ON
* - req_state: if the clock is requested to be forced ON
* - current_state: if the clock is currently ON
* @is_off: Is the clock OFF
* - req_state: if the clock is requested to be forced OFF
* - current_state: if the clock is currently Gated
* @set_parent: Set the clock source of a specific device clock
* - parent_id: Parent clock identifier to set.
* @get_parent: Get the current clock source of a specific device clock
* - parent_id: Parent clock identifier which is the parent.
* @get_num_parents: Get the number of parents of the current clock source
* - num_parents: returns the number of parent clocks.
* @get_best_match_freq: Find a best matching frequency for a frequency
* range.
* - match_freq: Best matching frequency in Hz.
* @set_freq: Set the Clock frequency
* @get_freq: Get the Clock frequency
* - current_freq: Frequency in Hz that the clock is at.
*
* NOTE: for all these functions, the following parameters are generic in
* nature:
* -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* -did: Device identifier this request is for
* -cid: Clock identifier for the device for this request.
* Each device has it's own set of clock inputs. This indexes
* which clock input to modify.
* -min_freq: The minimum allowable frequency in Hz. This is the minimum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
* -target_freq: The target clock frequency in Hz. A frequency will be
* processed as close to this target frequency as possible.
* -max_freq: The maximum allowable frequency in Hz. This is the maximum
* allowable programmed frequency and does not account for clock
* tolerances and jitter.
*
* Request for the clock - NOTE: the client MUST maintain integrity of
* usage count by balancing get_clock with put_clock. No refcounting is
* managed by driver for that purpose.
*/
struct ti_sci_clk_ops {
int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid,
bool needs_ssc, bool can_change_freq,
bool enable_input_term);
int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid,
bool *req_state);
int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid,
bool *req_state, bool *current_state);
int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid,
bool *req_state, bool *current_state);
int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
u8 parent_id);
int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
u8 *parent_id);
int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did,
u8 cid, u8 *num_parents);
int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did,
u8 cid, u64 min_freq, u64 target_freq,
u64 max_freq, u64 *match_freq);
int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
u64 min_freq, u64 target_freq, u64 max_freq);
int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
u64 *current_freq);
};
/**
* struct ti_sci_rm_core_ops - Resource management core operations
* @get_range: Get a range of resources belonging to ti sci host.
* @get_rage_from_shost: Get a range of resources belonging to
* specified host id.
* - s_host: Host processing entity to which the
* resources are allocated
*
* NOTE: for these functions, all the parameters are consolidated and defined
* as below:
* - handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* - dev_id: TISCI device ID.
* - subtype: Resource assignment subtype that is being requested
* from the given device.
* - range_start: Start index of the resource range
* - range_end: Number of resources in the range
*/
struct ti_sci_rm_core_ops {
int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id,
u8 subtype, u16 *range_start, u16 *range_num);
int (*get_range_from_shost)(const struct ti_sci_handle *handle,
u32 dev_id, u8 subtype, u8 s_host,
u16 *range_start, u16 *range_num);
};
/**
* struct ti_sci_core_ops - SoC Core Operations
* @reboot_device: Reboot the SoC
* Returns 0 for successful request(ideally should never return),
* else returns corresponding error value.
* @query_msmc: Query the size of available msmc
* Return 0 for successful query else appropriate error value.
*/
struct ti_sci_core_ops {
int (*reboot_device)(const struct ti_sci_handle *handle);
int (*query_msmc)(const struct ti_sci_handle *handle,
u64 *msmc_start, u64 *msmc_end);
};
/**
* struct ti_sci_proc_ops - Processor specific operations.
*
* @proc_request: Request for controlling a physical processor.
* The requesting host should be in the processor access list.
* @proc_release: Relinquish a physical processor control
* @proc_handover: Handover a physical processor control to another host
* in the permitted list.
* @set_proc_boot_cfg: Base configuration of the processor
* @set_proc_boot_ctrl: Setup limited control flags in specific cases.
* @proc_auth_boot_image:
* @get_proc_boot_status: Get the state of physical processor
* @proc_shutdown_no_wait: Shutdown a core without requesting or waiting for a
* response.
*
* NOTE: for all these functions, the following parameters are generic in
* nature:
* -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
* -pid: Processor ID
*
*/
struct ti_sci_proc_ops {
int (*proc_request)(const struct ti_sci_handle *handle, u8 pid);
int (*proc_release)(const struct ti_sci_handle *handle, u8 pid);
int (*proc_handover)(const struct ti_sci_handle *handle, u8 pid,
u8 hid);
int (*set_proc_boot_cfg)(const struct ti_sci_handle *handle, u8 pid,
u64 bv, u32 cfg_set, u32 cfg_clr);
int (*set_proc_boot_ctrl)(const struct ti_sci_handle *handle, u8 pid,
u32 ctrl_set, u32 ctrl_clr);
int (*proc_auth_boot_image)(const struct ti_sci_handle *handle,
u64 *image_addr, u32 *image_size);
int (*get_proc_boot_status)(const struct ti_sci_handle *handle, u8 pid,
u64 *bv, u32 *cfg_flags, u32 *ctrl_flags,
u32 *sts_flags);
int (*proc_shutdown_no_wait)(const struct ti_sci_handle *handle,
u8 pid);
};
#define TI_SCI_RING_MODE_RING (0)
#define TI_SCI_RING_MODE_MESSAGE (1)
#define TI_SCI_RING_MODE_CREDENTIALS (2)
#define TI_SCI_RING_MODE_QM (3)
#define TI_SCI_MSG_UNUSED_SECONDARY_HOST TI_SCI_RM_NULL_U8
/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID BIT(0)
/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID BIT(1)
/* RA config.count parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID BIT(2)
/* RA config.mode parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID BIT(3)
/* RA config.size parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4)
/* RA config.order_id parameter is valid for RM ring configure TISCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5)
#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \
(TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \
TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \
TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \
TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \
TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID)
/**
* struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations
* @config: configure the SoC Navigator Subsystem Ring Accelerator ring
*/
struct ti_sci_rm_ringacc_ops {
int (*config)(const struct ti_sci_handle *handle,
u32 valid_params, u16 nav_id, u16 index,
u32 addr_lo, u32 addr_hi, u32 count, u8 mode,
u8 size, u8 order_id
);
};
/**
* struct ti_sci_rm_psil_ops - PSI-L thread operations
* @pair: pair PSI-L source thread to a destination thread.
* If the src_thread is mapped to UDMA tchan, the corresponding channel's
* TCHAN_THRD_ID register is updated.
* If the dst_thread is mapped to UDMA rchan, the corresponding channel's
* RCHAN_THRD_ID register is updated.
* @unpair: unpair PSI-L source thread from a destination thread.
* If the src_thread is mapped to UDMA tchan, the corresponding channel's
* TCHAN_THRD_ID register is cleared.
* If the dst_thread is mapped to UDMA rchan, the corresponding channel's
* RCHAN_THRD_ID register is cleared.
*/
struct ti_sci_rm_psil_ops {
int (*pair)(const struct ti_sci_handle *handle, u32 nav_id,
u32 src_thread, u32 dst_thread);
int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id,
u32 src_thread, u32 dst_thread);
};
/* UDMAP channel types */
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR 2
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB 3 /* RX only */
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR 10
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR 11
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR 12
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR 13
/* UDMAP channel atypes */
#define TI_SCI_RM_UDMAP_ATYPE_PHYS 0
#define TI_SCI_RM_UDMAP_ATYPE_INTERMEDIATE 1
#define TI_SCI_RM_UDMAP_ATYPE_VIRTUAL 2
/* UDMAP channel scheduling priorities */
#define TI_SCI_RM_UDMAP_SCHED_PRIOR_HIGH 0
#define TI_SCI_RM_UDMAP_SCHED_PRIOR_MEDHIGH 1
#define TI_SCI_RM_UDMAP_SCHED_PRIOR_MEDLOW 2
#define TI_SCI_RM_UDMAP_SCHED_PRIOR_LOW 3
#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST 0
#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO 2
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES 1
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES 2
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES 3
#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_TCHAN 0
#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN 1
/* UDMAP TX/RX channel valid_params common declarations */
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID BIT(2)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID BIT(3)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID BIT(4)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID BIT(5)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID BIT(6)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID BIT(7)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID BIT(8)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID BIT(14)
/**
* Configures a Navigator Subsystem UDMAP transmit channel
*
* Configures a Navigator Subsystem UDMAP transmit channel registers.
* See @ti_sci_msg_rm_udmap_tx_ch_cfg_req
*/
struct ti_sci_msg_rm_udmap_tx_ch_cfg {
u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID BIT(15)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_EXTENDED_CH_TYPE_VALID BIT(16)
u16 nav_id;
u16 index;
u8 tx_pause_on_err;
u8 tx_filt_einfo;
u8 tx_filt_pswords;
u8 tx_atype;
u8 tx_chan_type;
u8 tx_supr_tdpkt;
u16 tx_fetch_size;
u8 tx_credit_count;
u16 txcq_qnum;
u8 tx_priority;
u8 tx_qos;
u8 tx_orderid;
u16 fdepth;
u8 tx_sched_priority;
u8 tx_burst_size;
u8 tx_tdtype;
u8 extended_ch_type;
};
/**
* Configures a Navigator Subsystem UDMAP receive channel
*
* Configures a Navigator Subsystem UDMAP receive channel registers.
* See @ti_sci_msg_rm_udmap_rx_ch_cfg_req
*/
struct ti_sci_msg_rm_udmap_rx_ch_cfg {
u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID BIT(12)
u16 nav_id;
u16 index;
u16 rx_fetch_size;
u16 rxcq_qnum;
u8 rx_priority;
u8 rx_qos;
u8 rx_orderid;
u8 rx_sched_priority;
u16 flowid_start;
u16 flowid_cnt;
u8 rx_pause_on_err;
u8 rx_atype;
u8 rx_chan_type;
u8 rx_ignore_short;
u8 rx_ignore_long;
u8 rx_burst_size;
};
/**
* Configures a Navigator Subsystem UDMAP receive flow
*
* Configures a Navigator Subsystem UDMAP receive flow's registers.
* See @tis_ci_msg_rm_udmap_flow_cfg_req
*/
struct ti_sci_msg_rm_udmap_flow_cfg {
u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID BIT(0)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID BIT(1)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID BIT(2)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID BIT(3)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID BIT(4)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID BIT(5)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID BIT(6)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID BIT(7)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID BIT(8)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID BIT(12)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID BIT(13)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID BIT(14)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID BIT(15)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID BIT(16)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID BIT(17)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID BIT(18)
u16 nav_id;
u16 flow_index;
u8 rx_einfo_present;
u8 rx_psinfo_present;
u8 rx_error_handling;
u8 rx_desc_type;
u16 rx_sop_offset;
u16 rx_dest_qnum;
u8 rx_src_tag_hi;
u8 rx_src_tag_lo;
u8 rx_dest_tag_hi;
u8 rx_dest_tag_lo;
u8 rx_src_tag_hi_sel;
u8 rx_src_tag_lo_sel;
u8 rx_dest_tag_hi_sel;
u8 rx_dest_tag_lo_sel;
u16 rx_fdq0_sz0_qnum;
u16 rx_fdq1_qnum;
u16 rx_fdq2_qnum;
u16 rx_fdq3_qnum;
u8 rx_ps_location;
};
/**
* struct ti_sci_rm_udmap_ops - UDMA Management operations
* @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel.
* @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel.
* @rx_flow_cfg: configure SoC Navigator Subsystem UDMA receive flow.
*/
struct ti_sci_rm_udmap_ops {
int (*tx_ch_cfg)(const struct ti_sci_handle *handle,
const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params);
int (*rx_ch_cfg)(const struct ti_sci_handle *handle,
const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params);
int (*rx_flow_cfg)(
const struct ti_sci_handle *handle,
const struct ti_sci_msg_rm_udmap_flow_cfg *params);
};
/**
* struct ti_sci_msg_fwl_region_cfg - Request and Response for firewalls settings
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question. (index starting from 0) In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0)
* @n_permission_regs: Number of permission registers to set
* @control: Contents of the firewall CONTROL register to set
* @permissions: Contents of the firewall PERMISSION register to set
* @start_address: Contents of the firewall START_ADDRESS register to set
* @end_address: Contents of the firewall END_ADDRESS register to set
*/
struct ti_sci_msg_fwl_region {
u16 fwl_id;
u16 region;
u32 n_permission_regs;
u32 control;
u32 permissions[3];
u64 start_address;
u64 end_address;
} __packed;
/**
* \brief Request and Response for firewall owner change
*
* @fwl_id: Firewall ID in question
* @region: Region or channel number to set config info
* This field is unused in case of a simple firewall and must be initialized
* to zero. In case of a region based firewall, this field indicates the
* region in question. (index starting from 0) In case of a channel based
* firewall, this field indicates the channel in question (index starting
* from 0)
* @n_permission_regs: Number of permission registers <= 3
* @control: Control register value for this region
* @owner_index: New owner index to change to. Owner indexes are setup in DMSC firmware boot configuration data
* @owner_privid: New owner priv-id, used to lookup owner_index is not known, must be set to zero otherwise
* @owner_permission_bits: New owner permission bits
*/
struct ti_sci_msg_fwl_owner {
u16 fwl_id;
u16 region;
u8 owner_index;
u8 owner_privid;
u16 owner_permission_bits;
} __packed;
/**
* struct ti_sci_fwl_ops - Firewall specific operations
* @set_fwl_region: Request for configuring the firewall permissions.
* @get_fwl_region: Request for retrieving the firewall permissions.
* @change_fwl_owner: Request for a change of firewall owner.
*/
struct ti_sci_fwl_ops {
int (*set_fwl_region)(const struct ti_sci_handle *handle, const struct ti_sci_msg_fwl_region *region);
int (*get_fwl_region)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_region *region);
int (*change_fwl_owner)(const struct ti_sci_handle *handle, struct ti_sci_msg_fwl_owner *owner);
};
/**
* struct ti_sci_ops - Function support for TI SCI
* @board_ops: Miscellaneous operations
* @dev_ops: Device specific operations
* @clk_ops: Clock specific operations
* @core_ops: Core specific operations
* @proc_ops: Processor specific operations
* @ring_ops: Ring Accelerator Management operations
* @fw_ops: Firewall specific operations
*/
struct ti_sci_ops {
struct ti_sci_board_ops board_ops;
struct ti_sci_dev_ops dev_ops;
struct ti_sci_clk_ops clk_ops;
struct ti_sci_core_ops core_ops;
struct ti_sci_proc_ops proc_ops;
struct ti_sci_rm_core_ops rm_core_ops;
struct ti_sci_rm_ringacc_ops rm_ring_ops;
struct ti_sci_rm_psil_ops rm_psil_ops;
struct ti_sci_rm_udmap_ops rm_udmap_ops;
struct ti_sci_fwl_ops fwl_ops;
};
/**
* struct ti_sci_handle - Handle returned to TI SCI clients for usage.
* @ops: operations that are made available to TI SCI clients
* @version: structure containing version information
*/
struct ti_sci_handle {
struct ti_sci_ops ops;
struct ti_sci_version_info version;
};
#define TI_SCI_RESOURCE_NULL 0xffff
/**
* struct ti_sci_resource_desc - Description of TI SCI resource instance range.
* @start: Start index of the resource.
* @num: Number of resources.
* @res_map: Bitmap to manage the allocation of these resources.
*/
struct ti_sci_resource_desc {
u16 start;
u16 num;
unsigned long *res_map;
};
/**
* struct ti_sci_resource - Structure representing a resource assigned
* to a device.
* @sets: Number of sets available from this resource type
* @desc: Array of resource descriptors.
*/
struct ti_sci_resource {
u16 sets;
struct ti_sci_resource_desc *desc;
};
#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
const struct ti_sci_handle *ti_sci_get_handle_from_sysfw(struct udevice *dev);
const struct ti_sci_handle *ti_sci_get_handle(struct udevice *dev);
const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev,
const char *property);
u16 ti_sci_get_free_resource(struct ti_sci_resource *res);
void ti_sci_release_resource(struct ti_sci_resource *res, u16 id);
struct ti_sci_resource *
devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
struct udevice *dev, u32 dev_id, char *of_prop);
#else /* CONFIG_TI_SCI_PROTOCOL */
static inline
const struct ti_sci_handle *ti_sci_get_handle_from_sysfw(struct udevice *dev)
{
return ERR_PTR(-EINVAL);
}
static inline const struct ti_sci_handle *ti_sci_get_handle(struct udevice *dev)
{
return ERR_PTR(-EINVAL);
}
static inline
const struct ti_sci_handle *ti_sci_get_by_phandle(struct udevice *dev,
const char *property)
{
return ERR_PTR(-EINVAL);
}
static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
{
return TI_SCI_RESOURCE_NULL;
}
static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
{
}
static inline struct ti_sci_resource *
devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
struct udevice *dev, u32 dev_id, char *of_prop)
{
return ERR_PTR(-EINVAL);
}
#endif /* CONFIG_TI_SCI_PROTOCOL */
#endif /* __TISCI_PROTOCOL_H */
Reference in a new issue View git blame Copy permalink