mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
2529dea893
The code block reading the DT property for the clock output control was before the phy's DT node pointer was set, so it could never work. Move it after the node pointer is set. Also store the unsigned 32-bit property into an unsigned value, not a signed value, as the former will cause a problem if value overflows. For instance, if one were to add 0xffffffff as a code to mean the clock output should be turned off. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Janine Hagemann <j.hagemann@phytec.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
345 lines
9.6 KiB
C
345 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* TI PHY drivers
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <phy.h>
|
|
#include <linux/compat.h>
|
|
#include <malloc.h>
|
|
|
|
#include <dm.h>
|
|
#include <dt-bindings/net/ti-dp83867.h>
|
|
|
|
|
|
/* TI DP83867 */
|
|
#define DP83867_DEVADDR 0x1f
|
|
|
|
#define MII_DP83867_PHYCTRL 0x10
|
|
#define MII_DP83867_MICR 0x12
|
|
#define MII_DP83867_CFG2 0x14
|
|
#define MII_DP83867_BISCR 0x16
|
|
#define DP83867_CTRL 0x1f
|
|
|
|
/* Extended Registers */
|
|
#define DP83867_CFG4 0x0031
|
|
#define DP83867_RGMIICTL 0x0032
|
|
#define DP83867_STRAP_STS1 0x006E
|
|
#define DP83867_RGMIIDCTL 0x0086
|
|
#define DP83867_IO_MUX_CFG 0x0170
|
|
|
|
#define DP83867_SW_RESET BIT(15)
|
|
#define DP83867_SW_RESTART BIT(14)
|
|
|
|
/* MICR Interrupt bits */
|
|
#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
|
|
#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
|
|
#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
|
|
#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
|
|
#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
|
|
#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
|
|
#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
|
|
#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
|
|
#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
|
|
#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
|
|
#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
|
|
#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)
|
|
|
|
/* RGMIICTL bits */
|
|
#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
|
|
#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)
|
|
|
|
/* STRAP_STS1 bits */
|
|
#define DP83867_STRAP_STS1_RESERVED BIT(11)
|
|
|
|
/* PHY CTRL bits */
|
|
#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
|
|
#define DP83867_PHYCR_RESERVED_MASK BIT(11)
|
|
#define DP83867_MDI_CROSSOVER 5
|
|
#define DP83867_MDI_CROSSOVER_AUTO 2
|
|
#define DP83867_MDI_CROSSOVER_MDIX 2
|
|
#define DP83867_PHYCTRL_SGMIIEN 0x0800
|
|
#define DP83867_PHYCTRL_RXFIFO_SHIFT 12
|
|
#define DP83867_PHYCTRL_TXFIFO_SHIFT 14
|
|
|
|
/* RGMIIDCTL bits */
|
|
#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
|
|
|
|
/* CFG2 bits */
|
|
#define MII_DP83867_CFG2_SPEEDOPT_10EN 0x0040
|
|
#define MII_DP83867_CFG2_SGMII_AUTONEGEN 0x0080
|
|
#define MII_DP83867_CFG2_SPEEDOPT_ENH 0x0100
|
|
#define MII_DP83867_CFG2_SPEEDOPT_CNT 0x0800
|
|
#define MII_DP83867_CFG2_SPEEDOPT_INTLOW 0x2000
|
|
#define MII_DP83867_CFG2_MASK 0x003F
|
|
|
|
/* User setting - can be taken from DTS */
|
|
#define DEFAULT_RX_ID_DELAY DP83867_RGMIIDCTL_2_25_NS
|
|
#define DEFAULT_TX_ID_DELAY DP83867_RGMIIDCTL_2_75_NS
|
|
#define DEFAULT_FIFO_DEPTH DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
|
|
|
|
/* IO_MUX_CFG bits */
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL 0x1f
|
|
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
|
|
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
|
|
#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8
|
|
#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK \
|
|
GENMASK(0x1f, DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT)
|
|
|
|
/* CFG4 bits */
|
|
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
|
|
|
|
enum {
|
|
DP83867_PORT_MIRRORING_KEEP,
|
|
DP83867_PORT_MIRRORING_EN,
|
|
DP83867_PORT_MIRRORING_DIS,
|
|
};
|
|
|
|
struct dp83867_private {
|
|
int rx_id_delay;
|
|
int tx_id_delay;
|
|
int fifo_depth;
|
|
int io_impedance;
|
|
bool rxctrl_strap_quirk;
|
|
int port_mirroring;
|
|
unsigned int clk_output_sel;
|
|
};
|
|
|
|
static int dp83867_config_port_mirroring(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 =
|
|
(struct dp83867_private *)phydev->priv;
|
|
u16 val;
|
|
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
|
|
|
|
if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN)
|
|
val |= DP83867_CFG4_PORT_MIRROR_EN;
|
|
else
|
|
val &= ~DP83867_CFG4_PORT_MIRROR_EN;
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_DM_ETH)
|
|
/**
|
|
* dp83867_data_init - Convenience function for setting PHY specific data
|
|
*
|
|
* @phydev: the phy_device struct
|
|
*/
|
|
static int dp83867_of_init(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 = phydev->priv;
|
|
ofnode node;
|
|
u16 val;
|
|
|
|
node = phy_get_ofnode(phydev);
|
|
if (!ofnode_valid(node))
|
|
return -EINVAL;
|
|
|
|
/* Keep the default value if ti,clk-output-sel is not set */
|
|
dp83867->clk_output_sel =
|
|
ofnode_read_u32_default(node, "ti,clk-output-sel",
|
|
DP83867_CLK_O_SEL_REF_CLK);
|
|
|
|
if (ofnode_read_bool(node, "ti,max-output-impedance"))
|
|
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX;
|
|
else if (ofnode_read_bool(node, "ti,min-output-impedance"))
|
|
dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN;
|
|
else
|
|
dp83867->io_impedance = -EINVAL;
|
|
|
|
if (ofnode_read_bool(node, "ti,dp83867-rxctrl-strap-quirk"))
|
|
dp83867->rxctrl_strap_quirk = true;
|
|
dp83867->rx_id_delay = ofnode_read_u32_default(node,
|
|
"ti,rx-internal-delay",
|
|
DEFAULT_RX_ID_DELAY);
|
|
|
|
dp83867->tx_id_delay = ofnode_read_u32_default(node,
|
|
"ti,tx-internal-delay",
|
|
DEFAULT_TX_ID_DELAY);
|
|
|
|
dp83867->fifo_depth = ofnode_read_u32_default(node, "ti,fifo-depth",
|
|
DEFAULT_FIFO_DEPTH);
|
|
if (ofnode_read_bool(node, "enet-phy-lane-swap"))
|
|
dp83867->port_mirroring = DP83867_PORT_MIRRORING_EN;
|
|
|
|
if (ofnode_read_bool(node, "enet-phy-lane-no-swap"))
|
|
dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;
|
|
|
|
|
|
/* Clock output selection if muxing property is set */
|
|
if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_IO_MUX_CFG);
|
|
val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
|
|
val |= (dp83867->clk_output_sel <<
|
|
DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_IO_MUX_CFG, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int dp83867_of_init(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867 = phydev->priv;
|
|
|
|
dp83867->rx_id_delay = DEFAULT_RX_ID_DELAY;
|
|
dp83867->tx_id_delay = DEFAULT_TX_ID_DELAY;
|
|
dp83867->fifo_depth = DEFAULT_FIFO_DEPTH;
|
|
dp83867->io_impedance = -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int dp83867_config(struct phy_device *phydev)
|
|
{
|
|
struct dp83867_private *dp83867;
|
|
unsigned int val, delay, cfg2;
|
|
int ret, bs;
|
|
|
|
if (!phydev->priv) {
|
|
dp83867 = kzalloc(sizeof(*dp83867), GFP_KERNEL);
|
|
if (!dp83867)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = dp83867;
|
|
ret = dp83867_of_init(phydev);
|
|
if (ret)
|
|
goto err_out;
|
|
} else {
|
|
dp83867 = (struct dp83867_private *)phydev->priv;
|
|
}
|
|
|
|
/* Restart the PHY. */
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, DP83867_CTRL);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL,
|
|
val | DP83867_SW_RESTART);
|
|
|
|
/* Mode 1 or 2 workaround */
|
|
if (dp83867->rxctrl_strap_quirk) {
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_CFG4);
|
|
val &= ~BIT(7);
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_CFG4, val);
|
|
}
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
|
|
(DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) |
|
|
(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
/* The code below checks if "port mirroring" N/A MODE4 has been
|
|
* enabled during power on bootstrap.
|
|
*
|
|
* Such N/A mode enabled by mistake can put PHY IC in some
|
|
* internal testing mode and disable RGMII transmission.
|
|
*
|
|
* In this particular case one needs to check STRAP_STS1
|
|
* register's bit 11 (marked as RESERVED).
|
|
*/
|
|
|
|
bs = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_STRAP_STS1);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
|
|
if (bs & DP83867_STRAP_STS1_RESERVED) {
|
|
val &= ~DP83867_PHYCR_RESERVED_MASK;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
|
|
val);
|
|
}
|
|
|
|
} else if (phy_interface_is_sgmii(phydev)) {
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
|
|
(BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
|
|
|
|
cfg2 = phy_read(phydev, phydev->addr, MII_DP83867_CFG2);
|
|
cfg2 &= MII_DP83867_CFG2_MASK;
|
|
cfg2 |= (MII_DP83867_CFG2_SPEEDOPT_10EN |
|
|
MII_DP83867_CFG2_SGMII_AUTONEGEN |
|
|
MII_DP83867_CFG2_SPEEDOPT_ENH |
|
|
MII_DP83867_CFG2_SPEEDOPT_CNT |
|
|
MII_DP83867_CFG2_SPEEDOPT_INTLOW);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2);
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RGMIICTL, 0x0);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
|
|
DP83867_PHYCTRL_SGMIIEN |
|
|
(DP83867_MDI_CROSSOVER_MDIX <<
|
|
DP83867_MDI_CROSSOVER) |
|
|
(dp83867->fifo_depth << DP83867_PHYCTRL_RXFIFO_SHIFT) |
|
|
(dp83867->fifo_depth << DP83867_PHYCTRL_TXFIFO_SHIFT));
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_BISCR, 0x0);
|
|
}
|
|
|
|
if (phy_interface_is_rgmii(phydev)) {
|
|
val = phy_read_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RGMIICTL);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
|
|
DP83867_RGMII_RX_CLK_DELAY_EN);
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
val |= DP83867_RGMII_TX_CLK_DELAY_EN;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
val |= DP83867_RGMII_RX_CLK_DELAY_EN;
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RGMIICTL, val);
|
|
|
|
delay = (dp83867->rx_id_delay |
|
|
(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
|
|
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_RGMIIDCTL, delay);
|
|
|
|
if (dp83867->io_impedance >= 0) {
|
|
val = phy_read_mmd(phydev,
|
|
DP83867_DEVADDR,
|
|
DP83867_IO_MUX_CFG);
|
|
val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
|
|
val |= dp83867->io_impedance &
|
|
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
|
|
phy_write_mmd(phydev, DP83867_DEVADDR,
|
|
DP83867_IO_MUX_CFG, val);
|
|
}
|
|
}
|
|
|
|
if (dp83867->port_mirroring != DP83867_PORT_MIRRORING_KEEP)
|
|
dp83867_config_port_mirroring(phydev);
|
|
|
|
genphy_config_aneg(phydev);
|
|
return 0;
|
|
|
|
err_out:
|
|
kfree(dp83867);
|
|
return ret;
|
|
}
|
|
|
|
static struct phy_driver DP83867_driver = {
|
|
.name = "TI DP83867",
|
|
.uid = 0x2000a231,
|
|
.mask = 0xfffffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &dp83867_config,
|
|
.startup = &genphy_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_ti_init(void)
|
|
{
|
|
phy_register(&DP83867_driver);
|
|
return 0;
|
|
}
|