u-boot/arch/arm/include/asm/arch-am33xx/hardware.h
Landheer-Cieslak, Ronald 48c7f77128 Add UART base addresses for additional UARTs
UARTs 1 through 5 were missing in the code - added.
Also pick the default according to the configuration setting for the
console index.

Signed-off-by: Ronald Landheer-Cieslak <ronaldlandheercieslak@eaton.com>
2017-11-17 10:53:45 -05:00

90 lines
2.2 KiB
C

/*
* hardware.h
*
* hardware specific header
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __AM33XX_HARDWARE_H
#define __AM33XX_HARDWARE_H
#include <config.h>
#include <asm/arch/omap.h>
#ifdef CONFIG_AM33XX
#include <asm/arch/hardware_am33xx.h>
#elif defined(CONFIG_TI816X)
#include <asm/arch/hardware_ti816x.h>
#elif defined(CONFIG_TI814X)
#include <asm/arch/hardware_ti814x.h>
#elif defined(CONFIG_AM43XX)
#include <asm/arch/hardware_am43xx.h>
#endif
/*
* Common hardware definitions
*/
/* DM Timer base addresses */
#define DM_TIMER0_BASE 0x4802C000
#define DM_TIMER1_BASE 0x4802E000
#define DM_TIMER2_BASE 0x48040000
#define DM_TIMER3_BASE 0x48042000
#define DM_TIMER4_BASE 0x48044000
#define DM_TIMER5_BASE 0x48046000
#define DM_TIMER6_BASE 0x48048000
#define DM_TIMER7_BASE 0x4804A000
/* GPIO Base address */
#define GPIO0_BASE 0x48032000
#define GPIO1_BASE 0x4804C000
/* BCH Error Location Module */
#define ELM_BASE 0x48080000
/* EMIF Base address */
#define EMIF4_0_CFG_BASE 0x4C000000
#define EMIF4_1_CFG_BASE 0x4D000000
/* DDR Base address */
#define DDR_CTRL_ADDR 0x44E10E04
#define DDR_CONTROL_BASE_ADDR 0x44E11404
/* UART */
#if CONFIG_CONS_INDEX == 1
# define DEFAULT_UART_BASE UART0_BASE
#elif CONFIG_CONS_INDEX == 2
# define DEFAULT_UART_BASE UART1_BASE
#elif CONFIG_CONS_INDEX == 3
# define DEFAULT_UART_BASE UART2_BASE
#elif CONFIG_CONS_INDEX == 4
# define DEFAULT_UART_BASE UART3_BASE
#elif CONFIG_CONS_INDEX == 5
# define DEFAULT_UART_BASE UART4_BASE
#elif CONFIG_CONS_INDEX == 6
# define DEFAULT_UART_BASE UART5_BASE
#endif
/* GPMC Base address */
#define GPMC_BASE 0x50000000
/* CPSW Config space */
#define CPSW_BASE 0x4A100000
/* Control status register */
#define CTRL_CRYSTAL_FREQ_SRC_MASK (1 << 31)
#define CTRL_CRYSTAL_FREQ_SRC_SHIFT 31
#define CTRL_CRYSTAL_FREQ_SELECTION_MASK (0x3 << 29)
#define CTRL_CRYSTAL_FREQ_SELECTION_SHIFT 29
#define CTRL_SYSBOOT_15_14_MASK (0x3 << 22)
#define CTRL_SYSBOOT_15_14_SHIFT 22
#define CTRL_CRYSTAL_FREQ_SRC_SYSBOOT 0x0
#define CTRL_CRYSTAL_FREQ_SRC_EFUSE 0x1
#define NUM_CRYSTAL_FREQ 0x4
int clk_get(int clk);
#endif /* __AM33XX_HARDWARE_H */