mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
9829cabbaa
Void function was returning 0 in the m41t94 rtc driver. This makes it similar to m41t62 rtc driver. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
123 lines
3.1 KiB
C
123 lines
3.1 KiB
C
/*
|
|
* Driver for ST M41T94 SPI RTC
|
|
*
|
|
* Taken from the Linux kernel drivier:
|
|
* Copyright (C) 2008 Kim B. Heino
|
|
*
|
|
* Adaptation for U-Boot:
|
|
* Copyright (C) 2009
|
|
* Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <rtc.h>
|
|
#include <spi.h>
|
|
|
|
static struct spi_slave *slave;
|
|
|
|
#define M41T94_REG_SECONDS 0x01
|
|
#define M41T94_REG_MINUTES 0x02
|
|
#define M41T94_REG_HOURS 0x03
|
|
#define M41T94_REG_WDAY 0x04
|
|
#define M41T94_REG_DAY 0x05
|
|
#define M41T94_REG_MONTH 0x06
|
|
#define M41T94_REG_YEAR 0x07
|
|
#define M41T94_REG_HT 0x0c
|
|
|
|
#define M41T94_BIT_HALT 0x40
|
|
#define M41T94_BIT_STOP 0x80
|
|
#define M41T94_BIT_CB 0x40
|
|
#define M41T94_BIT_CEB 0x80
|
|
|
|
int rtc_set(struct rtc_time *tm)
|
|
{
|
|
u8 buf[8]; /* write cmd + 7 registers */
|
|
int ret;
|
|
|
|
if (!slave) {
|
|
slave = spi_setup_slave(CONFIG_M41T94_SPI_BUS,
|
|
CONFIG_M41T94_SPI_CS, 1000000,
|
|
SPI_MODE_3);
|
|
if (!slave)
|
|
return -1;
|
|
}
|
|
spi_claim_bus(slave);
|
|
|
|
buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */
|
|
buf[M41T94_REG_SECONDS] = bin2bcd(tm->tm_sec);
|
|
buf[M41T94_REG_MINUTES] = bin2bcd(tm->tm_min);
|
|
buf[M41T94_REG_HOURS] = bin2bcd(tm->tm_hour);
|
|
buf[M41T94_REG_WDAY] = bin2bcd(tm->tm_wday + 1);
|
|
buf[M41T94_REG_DAY] = bin2bcd(tm->tm_mday);
|
|
buf[M41T94_REG_MONTH] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB;
|
|
if (tm->tm_year >= 100)
|
|
buf[M41T94_REG_HOURS] |= M41T94_BIT_CB;
|
|
buf[M41T94_REG_YEAR] = bin2bcd(tm->tm_year % 100);
|
|
|
|
ret = spi_xfer(slave, 64, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
spi_release_bus(slave);
|
|
return ret;
|
|
}
|
|
|
|
int rtc_get(struct rtc_time *tm)
|
|
{
|
|
u8 buf[2];
|
|
int ret, hour;
|
|
|
|
if (!slave) {
|
|
slave = spi_setup_slave(CONFIG_M41T94_SPI_BUS,
|
|
CONFIG_M41T94_SPI_CS, 1000000,
|
|
SPI_MODE_3);
|
|
if (!slave)
|
|
return -1;
|
|
}
|
|
spi_claim_bus(slave);
|
|
|
|
/* clear halt update bit */
|
|
ret = spi_w8r8(slave, M41T94_REG_HT);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & M41T94_BIT_HALT) {
|
|
buf[0] = 0x80 | M41T94_REG_HT;
|
|
buf[1] = ret & ~M41T94_BIT_HALT;
|
|
spi_xfer(slave, 16, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
/* clear stop bit */
|
|
ret = spi_w8r8(slave, M41T94_REG_SECONDS);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & M41T94_BIT_STOP) {
|
|
buf[0] = 0x80 | M41T94_REG_SECONDS;
|
|
buf[1] = ret & ~M41T94_BIT_STOP;
|
|
spi_xfer(slave, 16, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END);
|
|
}
|
|
|
|
tm->tm_sec = bcd2bin(spi_w8r8(slave, M41T94_REG_SECONDS));
|
|
tm->tm_min = bcd2bin(spi_w8r8(slave, M41T94_REG_MINUTES));
|
|
hour = spi_w8r8(slave, M41T94_REG_HOURS);
|
|
tm->tm_hour = bcd2bin(hour & 0x3f);
|
|
tm->tm_wday = bcd2bin(spi_w8r8(slave, M41T94_REG_WDAY)) - 1;
|
|
tm->tm_mday = bcd2bin(spi_w8r8(slave, M41T94_REG_DAY));
|
|
tm->tm_mon = bcd2bin(spi_w8r8(slave, M41T94_REG_MONTH)) - 1;
|
|
tm->tm_year = bcd2bin(spi_w8r8(slave, M41T94_REG_YEAR));
|
|
if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB))
|
|
tm->tm_year += 100;
|
|
|
|
spi_release_bus(slave);
|
|
return 0;
|
|
}
|
|
|
|
void rtc_reset(void)
|
|
{
|
|
/*
|
|
* Could not be tested as the reset pin is not wired on
|
|
* the sbc35-ag20 board
|
|
*/
|
|
}
|