mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
9bbe210512
In case of empty battery or glitches the oscillator fail bit might be set. This will reset the bit in the reset routine. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
356 lines
8.5 KiB
C
356 lines
8.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2018
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de.
|
|
*
|
|
* (C) Copyright 2008
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* based on a the Linux rtc-m41t80.c driver which is:
|
|
* Alexander Bigga <ab@mycable.de>, 2006 (c) mycable GmbH
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support for STMicroelectronics M41T62
|
|
*/
|
|
|
|
/* #define DEBUG */
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <rtc.h>
|
|
#include <i2c.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define M41T62_REG_SSEC 0
|
|
#define M41T62_REG_SEC 1
|
|
#define M41T62_REG_MIN 2
|
|
#define M41T62_REG_HOUR 3
|
|
#define M41T62_REG_WDAY 4
|
|
#define M41T62_REG_DAY 5
|
|
#define M41T62_REG_MON 6
|
|
#define M41T62_REG_YEAR 7
|
|
#define M41T62_REG_ALARM_MON 0xa
|
|
#define M41T62_REG_ALARM_DAY 0xb
|
|
#define M41T62_REG_ALARM_HOUR 0xc
|
|
#define M41T62_REG_ALARM_MIN 0xd
|
|
#define M41T62_REG_ALARM_SEC 0xe
|
|
#define M41T62_REG_FLAGS 0xf
|
|
|
|
#define M41T62_DATETIME_REG_SIZE (M41T62_REG_YEAR + 1)
|
|
#define M41T62_ALARM_REG_SIZE \
|
|
(M41T62_REG_ALARM_SEC + 1 - M41T62_REG_ALARM_MON)
|
|
|
|
#define M41T62_SEC_ST (1 << 7) /* ST: Stop Bit */
|
|
#define M41T62_ALMON_AFE (1 << 7) /* AFE: AF Enable Bit */
|
|
#define M41T62_ALMON_SQWE (1 << 6) /* SQWE: SQW Enable Bit */
|
|
#define M41T62_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
|
|
#define M41T62_FLAGS_AF (1 << 6) /* AF: Alarm Flag Bit */
|
|
#define M41T62_FLAGS_OF (1 << 2) /* OF: Oscillator Flag Bit */
|
|
#define M41T62_FLAGS_BATT_LOW (1 << 4) /* BL: Battery Low Bit */
|
|
|
|
#define M41T62_WDAY_SQW_FREQ_MASK 0xf0
|
|
#define M41T62_WDAY_SQW_FREQ_SHIFT 4
|
|
|
|
#define M41T62_SQW_MAX_FREQ 32768
|
|
|
|
#define M41T62_FEATURE_HT (1 << 0)
|
|
#define M41T62_FEATURE_BL (1 << 1)
|
|
|
|
#define M41T80_ALHOUR_HT (1 << 6) /* HT: Halt Update Bit */
|
|
|
|
static void m41t62_update_rtc_time(struct rtc_time *tm, u8 *buf)
|
|
{
|
|
debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
|
|
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
|
|
__FUNCTION__,
|
|
buf[0], buf[1], buf[2], buf[3],
|
|
buf[4], buf[5], buf[6], buf[7]);
|
|
|
|
tm->tm_sec = bcd2bin(buf[M41T62_REG_SEC] & 0x7f);
|
|
tm->tm_min = bcd2bin(buf[M41T62_REG_MIN] & 0x7f);
|
|
tm->tm_hour = bcd2bin(buf[M41T62_REG_HOUR] & 0x3f);
|
|
tm->tm_mday = bcd2bin(buf[M41T62_REG_DAY] & 0x3f);
|
|
tm->tm_wday = buf[M41T62_REG_WDAY] & 0x07;
|
|
tm->tm_mon = bcd2bin(buf[M41T62_REG_MON] & 0x1f);
|
|
|
|
/* assume 20YY not 19YY, and ignore the Century Bit */
|
|
/* U-Boot needs to add 1900 here */
|
|
tm->tm_year = bcd2bin(buf[M41T62_REG_YEAR]) + 100 + 1900;
|
|
|
|
debug("%s: tm is secs=%d, mins=%d, hours=%d, "
|
|
"mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
__FUNCTION__,
|
|
tm->tm_sec, tm->tm_min, tm->tm_hour,
|
|
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
|
|
}
|
|
|
|
static void m41t62_set_rtc_buf(const struct rtc_time *tm, u8 *buf)
|
|
{
|
|
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
|
|
tm->tm_hour, tm->tm_min, tm->tm_sec);
|
|
|
|
/* Merge time-data and register flags into buf[0..7] */
|
|
buf[M41T62_REG_SSEC] = 0;
|
|
buf[M41T62_REG_SEC] =
|
|
bin2bcd(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f);
|
|
buf[M41T62_REG_MIN] =
|
|
bin2bcd(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f);
|
|
buf[M41T62_REG_HOUR] =
|
|
bin2bcd(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ;
|
|
buf[M41T62_REG_WDAY] =
|
|
(tm->tm_wday & 0x07) | (buf[M41T62_REG_WDAY] & ~0x07);
|
|
buf[M41T62_REG_DAY] =
|
|
bin2bcd(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f);
|
|
buf[M41T62_REG_MON] =
|
|
bin2bcd(tm->tm_mon) | (buf[M41T62_REG_MON] & ~0x1f);
|
|
/* assume 20YY not 19YY */
|
|
buf[M41T62_REG_YEAR] = bin2bcd(tm->tm_year % 100);
|
|
}
|
|
|
|
#ifdef CONFIG_DM_RTC
|
|
static int m41t62_rtc_get(struct udevice *dev, struct rtc_time *tm)
|
|
{
|
|
u8 buf[M41T62_DATETIME_REG_SIZE];
|
|
int ret;
|
|
|
|
ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
m41t62_update_rtc_time(tm, buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m41t62_rtc_set(struct udevice *dev, const struct rtc_time *tm)
|
|
{
|
|
u8 buf[M41T62_DATETIME_REG_SIZE];
|
|
int ret;
|
|
|
|
ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
m41t62_set_rtc_buf(tm, buf);
|
|
|
|
ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
|
|
if (ret) {
|
|
printf("I2C write failed in %s()\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m41t62_sqw_enable(struct udevice *dev, bool enable)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
ret = dm_i2c_read(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (enable)
|
|
val |= M41T62_ALMON_SQWE;
|
|
else
|
|
val &= ~M41T62_ALMON_SQWE;
|
|
|
|
return dm_i2c_write(dev, M41T62_REG_ALARM_MON, &val, sizeof(val));
|
|
}
|
|
|
|
static int m41t62_sqw_set_rate(struct udevice *dev, unsigned int rate)
|
|
{
|
|
u8 val, newval, sqwrateval;
|
|
int ret;
|
|
|
|
if (rate >= M41T62_SQW_MAX_FREQ)
|
|
sqwrateval = 1;
|
|
else if (rate >= M41T62_SQW_MAX_FREQ / 4)
|
|
sqwrateval = 2;
|
|
else if (rate)
|
|
sqwrateval = 15 - ilog2(rate);
|
|
|
|
ret = dm_i2c_read(dev, M41T62_REG_WDAY, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
newval = val;
|
|
newval &= ~M41T62_WDAY_SQW_FREQ_MASK;
|
|
newval |= (sqwrateval << M41T62_WDAY_SQW_FREQ_SHIFT);
|
|
|
|
/*
|
|
* Try to avoid writing unchanged values. Writing to this register
|
|
* will reset the internal counter pipeline and thus affect system
|
|
* time.
|
|
*/
|
|
if (newval == val)
|
|
return 0;
|
|
|
|
return dm_i2c_write(dev, M41T62_REG_WDAY, &newval, sizeof(newval));
|
|
}
|
|
|
|
static int m41t62_rtc_restart_osc(struct udevice *dev)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
/* 0. check if oscillator failure happened */
|
|
ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
if (!(val & M41T62_FLAGS_OF))
|
|
return 0;
|
|
|
|
ret = dm_i2c_read(dev, M41T62_REG_SEC, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 1. Set stop bit */
|
|
val |= M41T62_SEC_ST;
|
|
ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 2. Clear stop bit */
|
|
val &= ~M41T62_SEC_ST;
|
|
ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 3. wait 4 seconds */
|
|
mdelay(4000);
|
|
|
|
ret = dm_i2c_read(dev, M41T62_REG_FLAGS, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 4. clear M41T62_FLAGS_OF bit */
|
|
val &= ~M41T62_FLAGS_OF;
|
|
ret = dm_i2c_write(dev, M41T62_REG_FLAGS, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m41t62_rtc_clear_ht(struct udevice *dev)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
/*
|
|
* M41T82: Make sure HT (Halt Update) bit is cleared.
|
|
* This bit is 0 in M41T62 so its save to clear it always.
|
|
*/
|
|
|
|
ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
val &= ~M41T80_ALHOUR_HT;
|
|
ret = dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m41t62_rtc_reset(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
|
|
ret = m41t62_rtc_restart_osc(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = m41t62_rtc_clear_ht(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Some boards feed the square wave as clock input into
|
|
* the SoC. This enables a 32.768kHz square wave, which is
|
|
* also the hardware default after power-loss.
|
|
*/
|
|
ret = m41t62_sqw_set_rate(dev, 32768);
|
|
if (ret)
|
|
return ret;
|
|
return m41t62_sqw_enable(dev, true);
|
|
}
|
|
|
|
/*
|
|
* Make sure HT bit is cleared. This bit is set on entering battery backup
|
|
* mode, so do this before the first read access.
|
|
*/
|
|
static int m41t62_rtc_probe(struct udevice *dev)
|
|
{
|
|
return m41t62_rtc_clear_ht(dev);
|
|
}
|
|
|
|
static const struct rtc_ops m41t62_rtc_ops = {
|
|
.get = m41t62_rtc_get,
|
|
.set = m41t62_rtc_set,
|
|
.reset = m41t62_rtc_reset,
|
|
};
|
|
|
|
static const struct udevice_id m41t62_rtc_ids[] = {
|
|
{ .compatible = "st,m41t62" },
|
|
{ .compatible = "st,m41t82" },
|
|
{ .compatible = "st,m41st87" },
|
|
{ .compatible = "microcrystal,rv4162" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rtc_m41t62) = {
|
|
.name = "rtc-m41t62",
|
|
.id = UCLASS_RTC,
|
|
.of_match = m41t62_rtc_ids,
|
|
.ops = &m41t62_rtc_ops,
|
|
.probe = &m41t62_rtc_probe,
|
|
};
|
|
|
|
#else /* NON DM RTC code - will be removed */
|
|
int rtc_get(struct rtc_time *tm)
|
|
{
|
|
u8 buf[M41T62_DATETIME_REG_SIZE];
|
|
|
|
i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
|
|
m41t62_update_rtc_time(tm, buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int rtc_set(struct rtc_time *tm)
|
|
{
|
|
u8 buf[M41T62_DATETIME_REG_SIZE];
|
|
|
|
i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
|
|
m41t62_set_rtc_buf(tm, buf);
|
|
|
|
if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
|
|
M41T62_DATETIME_REG_SIZE)) {
|
|
printf("I2C write failed in %s()\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void rtc_reset(void)
|
|
{
|
|
u8 val;
|
|
|
|
/*
|
|
* M41T82: Make sure HT (Halt Update) bit is cleared.
|
|
* This bit is 0 in M41T62 so its save to clear it always.
|
|
*/
|
|
i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
|
|
val &= ~M41T80_ALHOUR_HT;
|
|
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
|
|
}
|
|
#endif /* CONFIG_DM_RTC */
|