mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
41575d8e4c
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
255 lines
6.5 KiB
C
255 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static struct rockchip_mux_route_data rk3288_mux_route_data[] = {
|
|
{
|
|
/* edphdmi_cecinoutt1 */
|
|
.bank_num = 7,
|
|
.pin = 16,
|
|
.func = 2,
|
|
.route_offset = 0x264,
|
|
.route_val = BIT(16 + 12) | BIT(12),
|
|
}, {
|
|
/* edphdmi_cecinout */
|
|
.bank_num = 7,
|
|
.pin = 23,
|
|
.func = 4,
|
|
.route_offset = 0x264,
|
|
.route_val = BIT(16 + 12),
|
|
},
|
|
};
|
|
|
|
static int rk3288_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data, route_reg, route_val;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
if (bank->route_mask & BIT(pin)) {
|
|
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
|
|
&route_val)) {
|
|
ret = regmap_write(regmap, route_reg, route_val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* bank0 is special, there are no higher 16 bit writing bits. */
|
|
if (bank->bank_num == 0) {
|
|
regmap_read(regmap, reg, &data);
|
|
data &= ~(mask << bit);
|
|
} else {
|
|
/* enable the write to the equivalent lower bits */
|
|
data = (mask << (bit + 16));
|
|
}
|
|
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3288_PULL_OFFSET 0x140
|
|
#define RK3288_PULL_PMU_OFFSET 0x64
|
|
|
|
static void rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3288_PULL_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3288_PULL_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3288_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit, type;
|
|
u32 data;
|
|
|
|
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
|
|
return -ENOTSUPP;
|
|
|
|
rk3288_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
type = bank->pull_type[pin_num / 8];
|
|
ret = rockchip_translate_pull_value(type, pull);
|
|
if (ret < 0) {
|
|
debug("unsupported pull setting %d\n", pull);
|
|
return ret;
|
|
}
|
|
|
|
/* bank0 is special, there are no higher 16 bit writing bits */
|
|
if (bank->bank_num == 0) {
|
|
regmap_read(regmap, reg, &data);
|
|
data &= ~(((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << bit);
|
|
} else {
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
|
}
|
|
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3288_DRV_PMU_OFFSET 0x70
|
|
#define RK3288_DRV_GRF_OFFSET 0x1c0
|
|
|
|
static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
if (bank->bank_num == 0) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3288_DRV_PMU_OFFSET;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3288_DRV_GRF_OFFSET;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
*reg -= 0x10;
|
|
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
|
|
}
|
|
|
|
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
|
|
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3288_set_drive(struct rockchip_pin_bank *bank,
|
|
int pin_num, int strength)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u32 data;
|
|
u8 bit;
|
|
int type = bank->drv[pin_num / 8].drv_type;
|
|
|
|
rk3288_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
ret = rockchip_translate_drive_value(type, strength);
|
|
if (ret < 0) {
|
|
debug("unsupported driver strength %d\n", strength);
|
|
return ret;
|
|
}
|
|
|
|
/* bank0 is special, there are no higher 16 bit writing bits. */
|
|
if (bank->bank_num == 0) {
|
|
regmap_read(regmap, reg, &data);
|
|
data &= ~(((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << bit);
|
|
} else {
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
|
|
}
|
|
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3288_pin_banks[] = {
|
|
PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_SOURCE_PMU,
|
|
IOMUX_UNROUTED
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED,
|
|
IOMUX_UNROUTED,
|
|
IOMUX_UNROUTED,
|
|
0
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED),
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT),
|
|
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
|
|
IOMUX_WIDTH_4BIT,
|
|
0,
|
|
0
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED,
|
|
0,
|
|
0,
|
|
IOMUX_UNROUTED
|
|
),
|
|
PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED),
|
|
PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0,
|
|
0,
|
|
IOMUX_WIDTH_4BIT,
|
|
IOMUX_UNROUTED
|
|
),
|
|
PIN_BANK(8, 16, "gpio8"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
|
|
.pin_banks = rk3288_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3288_pin_banks),
|
|
.grf_mux_offset = 0x0,
|
|
.pmu_mux_offset = 0x84,
|
|
.iomux_routes = rk3288_mux_route_data,
|
|
.niomux_routes = ARRAY_SIZE(rk3288_mux_route_data),
|
|
.set_mux = rk3288_set_mux,
|
|
.set_pull = rk3288_set_pull,
|
|
.set_drive = rk3288_set_drive,
|
|
};
|
|
|
|
static const struct udevice_id rk3288_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3288-pinctrl",
|
|
.data = (ulong)&rk3288_pin_ctrl
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_rk3288_pinctrl) = {
|
|
.name = "rockchip_rk3288_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3288_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|