mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
4dd834906d
- DM368 SOC - booting with spl not with UBL from TI - before loading u-boot from NAND into RAM, test the RAM with the post memory test. If error is found, switch all LEDs on and halt system. - SPI Flash Dataflash Typ: M25PE80 - Ethernet DM9161BI - MMC - USB Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
141 lines
5 KiB
Text
141 lines
5 KiB
Text
With this approach, we don't need the UBL any more on DaVinci boards.
|
|
A "make boardname" will compile a u-boot.ubl, with UBL Header, which is
|
|
needed for the RBL to find the "UBL", which actually is a UBL-compatible
|
|
header, nand spl code and u-boot code.
|
|
|
|
|
|
As the RBL uses another read function as the "standard" u-boot,
|
|
we need a command, which switches between this two read/write
|
|
functions, so we can write the UBL header and the spl
|
|
code in a format, which the RBL can read. This is realize
|
|
(at the moment in board specific code) in the u-boot command
|
|
nandrbl
|
|
|
|
nandrbl without arguments returns actual mode (rbl or uboot).
|
|
with nandrbl mode (mode = "rbl" or "uboot") you can switch
|
|
between the two NAND read/write modes.
|
|
|
|
|
|
To set up mkimage you need a config file for mkimage, example:
|
|
board/ait/cam_enc_4xx/ublimage.cfg
|
|
|
|
For information about the configuration please see:
|
|
doc/README.ublimage
|
|
|
|
Example for the cam_enc_4xx board:
|
|
On the cam_enc_4xx board we have a NAND flash with blocksize = 0x20000 and
|
|
pagesize = 0x800, so the u-boot.ubl image (which you get with:
|
|
"make cam_enc_4xx") looks like this:
|
|
|
|
00000000 00 ed ac a1 20 00 00 00 06 00 00 00 05 00 00 00 |.... ...........|
|
|
00000010 00 00 00 00 20 00 00 00 ff ff ff ff ff ff ff ff |.... ...........|
|
|
00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
|
|
*
|
|
00000800 14 00 00 ea 14 f0 9f e5 10 f0 9f e5 0c f0 9f e5 |................|
|
|
00000810 08 f0 9f e5 04 f0 9f e5 00 f0 9f e5 04 f0 1f e5 |................|
|
|
00000820 00 01 00 00 78 56 34 12 78 56 34 12 78 56 34 12 |....xV4.xV4.xV4.|
|
|
[...]
|
|
*
|
|
00001fe0 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff |................|
|
|
00001ff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
|
|
*
|
|
00003800 14 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
|
|
00003810 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................|
|
|
00003820 80 01 08 81 e0 01 08 81 40 02 08 81 a0 02 08 81 |........@.......|
|
|
|
|
In the first "page" of the image, we have the UBL Header, needed for
|
|
the RBL to find the spl code.
|
|
|
|
The spl code starts in the second "page" of the image, with a size
|
|
defined by:
|
|
|
|
#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6
|
|
|
|
After the spl code, there comes the "real" u-boot code
|
|
@ (6 + 1) * pagesize = 0x3800
|
|
|
|
------------------------------------------------------------------------
|
|
Setting up spl code:
|
|
|
|
/*
|
|
* RBL searches from Block n (n = 1..24)
|
|
* so we can define, how many UBL Headers
|
|
* we write before the real spl code
|
|
*/
|
|
#define CONFIG_SYS_NROF_UBL_HEADER 5
|
|
#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((CONFIG_SYS_NROF_UBL_HEADER * \
|
|
CONFIG_SYS_NAND_BLOCK_SIZE) + \
|
|
(CONFIG_SYS_NROF_PAGES_NAND_SPL) * \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
------------------------------------------------------------------------
|
|
|
|
Burning into NAND:
|
|
|
|
step 1:
|
|
The RBL searches from Block n ( n = 1..24) on page 0 for valid UBL
|
|
Headers, so you have to burn the UBL header page from the u-boot.ubl
|
|
image to the blocks, you want to have the UBL header.
|
|
!! Don;t forget to switch to rbl nand read/write functions with
|
|
"nandrbl rbl"
|
|
|
|
step 2:
|
|
You need to setup in the ublimage.cfg, where the RBL can find the spl
|
|
code, and how big it is.
|
|
|
|
!! RBL always starts reading from page 0 !!
|
|
|
|
For the AIT board, we have:
|
|
PAGES 6
|
|
START_BLOCK 5
|
|
|
|
So we need to copy the spl code to block 5 page 0
|
|
!! Don;t forget to switch to rbl nand read/write functions with
|
|
"nandrbl rbl"
|
|
|
|
step 3:
|
|
You need to copy the u-boot image to the block/page
|
|
where the spl code reads it (CONFIG_SYS_NAND_U_BOOT_OFFS)
|
|
!! Don;t forget to switch to rbl nand read/write functions with
|
|
"nandrbl uboot", which is default.
|
|
|
|
On the cam_enc_4xx board it is:
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (0xc0000)
|
|
|
|
-> this results in following NAND usage on the cam_enc_4xx board:
|
|
|
|
addr
|
|
|
|
20000 possible UBL Header
|
|
40000 possible UBL Header
|
|
60000 possible UBL Header
|
|
80000 possilbe UBL Header
|
|
a0000 spl code
|
|
c0000 u-boot code
|
|
|
|
The above steps are executeed through the following environment vars:
|
|
(using 80000 as address for the UBL header)
|
|
|
|
pagesz=800
|
|
uboot=/tftpboot/cam_enc_4xx/u-boot.ubl
|
|
load=tftp 80000000 ${uboot}
|
|
writeheader nandrbl rbl;nand erase 80000 ${pagesz};nand write 80000000 80000 ${pagesz};nandrbl uboot
|
|
writenand_spl nandrbl rbl;nand erase a0000 3000;nand write 80000800 a0000 3000;nandrbl uboot
|
|
writeuboot nandrbl uboot;nand erase c0000 5d000;nand write 80003800 c0000 5d000
|
|
update=run load writeheader writenand_spl writeuboot
|
|
|
|
If you do a "run load update" u-boot, spl + ubl header
|
|
are magically updated ;-)
|
|
|
|
Note:
|
|
- There seem to be a bug in the RBL code (at least on my HW),
|
|
In the UBL block, I can set the page to values != 0, so it
|
|
is possible to burn step 1 and step 2 in one step into the
|
|
flash, but the RBL ignores the page settings, so I have to
|
|
burn the UBL Header to a page 0 and the spl code to
|
|
a page 0 ... :-(
|
|
- If we make the nand read/write functions in the RBL equal to
|
|
the functions in u-boot (as I have no RBL code, it is only
|
|
possible in u-boot), we could burn the complete image in
|
|
one step ... that would be nice ...
|